Hummer Hummer H2 SUT

Spare parts and drivetrain components for Hummer Hummer H2 SUT.

Products for Hummer Hummer H2 SUT

10 products
1 - 10 of 10
Item no.:3166740
  • Position: Front
  • Splines gearbox side: 143
  • Splines wheel side: 33
  • Total length: 551 mm
  • Flange diameter: 143 mm
Item no.:350892
  • Position: Outer
  • Inner splines: 37
  • Splines wheel side: 33
  • Seal diameter: 70 mm
  • Outer diameter: 99 mm
Item no.:313348
  • Position: Front
  • Splines wheel side: 33
  • Total length: 555 mm
  • Joint diameter: 112 mm
  • Flange diameter: 160 mm
Item no.:0921239
  • Total length: 94 mm
  • Diameter: 30 mm
Item no.:0623170
  • Total length: 97 mm
Item no.:0653261
  • Total length: 98 mm
Item no.:342115
  • Position: Front, Inner
  • Inner splines: 37
  • Splines gearbox side: 28
  • Seal diameter: 40 mm
  • Outer diameter: 96 mm
Item no.:393466
  • Position: Front
  • Total length: 82 mm
  • Diameter: 27 mm
Item no.:310162
  • Position: Front
  • Splines wheel side: 33
  • Total length: 550 mm
  • Joint diameter: 160 mm

Drivetrain for Hummer Hummer H2 SUT

The drivetrain on a Hummer Hummer H2 SUT is at the heart of the vehicle's capability in extreme conditions. As one of the most rugged vehicles on the road, every component in its power transmission is exposed to enormous stresses, particularly when off-roading or towing heavy loads. Maintaining your drivetrain is vital for preserving the vehicle's reliability and performance. At CVJoint24, we understand the unique demands placed on a Hummer and supply only parts that match or exceed the technical specifications for this iconic model. Choosing the right spare parts ensures that engine power reaches the wheels without loss or unwanted noises, extending the life of the entire vehicle.

How the drivetrain is engineered on the Hummer Hummer H2 SUT

The drivetrain design of the Hummer Hummer H2 SUT is engineered for maximum strength and articulation. The system relies on advanced four-wheel drive, distributing torque via a transfer box to both the front and rear axles. Independent front suspension requires premium-quality drive shafts with joints capable of handling wide operating angles and severe movement. These shafts are crucial for transferring torque while accommodating steering and suspension travel. The rear axle is typically a rigid setup, but it is in the front assembly where moving drivetrain components work hardest. Understanding this complex balance between mechanical strength and flexibility is key to selecting the right replacement parts when wear becomes noticeable.

Common faults and symptoms

Despite its heavy-duty build, the Hummer Hummer H2 SUT is not immune to drivetrain wear. One of the most typical signs that a CV joint is failing is a rhythmic clicking noise during sharp turns at low speeds. This often indicates that the outer constant velocity joint has suffered from dirt ingress or grease loss due to a split CV boot. Vibrations under acceleration can point towards problems with the inner CV joint or an imbalance in the drive shaft itself. If you notice wheel wobble or noises from the underside, it is vital to act quickly. Ignoring these symptoms can lead to complete failure, potentially damaging other parts of the transmission or leaving you stranded.

Common replacement parts for the Hummer Hummer H2 SUT

For owners of a Hummer Hummer H2 SUT, front-axle components demand the most attention over time. The most critical part is a complete drive shaft for Hummer Hummer H2 SUT, which is often far more cost-effective to replace as an assembly than attempting to rebuild individual joints. When replacing a driveshaft, it is also sensible to inspect related components such as wheel bearings and ABS rings, as these are often removed during the same job. Because the H2 SUT is a heavy vehicle, rubber parts like drive shaft boots deteriorate faster under hard driving, and timely replacement of a cracked boot can save an entire CV joint. We focus on providing complete solutions that make repairs straightforward and ensure your Hummer regains its original stability.

How to find the right part for your Hummer Hummer H2 SUT

Proceed to the relevant section for your Hummer Hummer H2 SUT:

On a vehicle with several potential drivetrain issues, starting in the right category saves time. By comparing the exact sections for the Hummer Hummer H2 SUT, it becomes easier to pinpoint faults in the drive shaft, CV joint or propeller shaft and navigate to the page that best matches your symptoms and fitment.

Following this approach minimises the risk of ordering the wrong part, ensuring the complete drive shafts you purchase fit perfectly during installation.

Why shop with CVJoint24

CVJoint24 is your trusted partner for specialist drivetrain parts. As a Swedish driveline specialist, we have built up in-depth expertise in power transmission for heavy, demanding vehicles such as the Hummer Hummer H2 SUT. We offer a comprehensive product range alongside the technical assurance required for complex repairs. Our extensive catalogue means we regularly stock items that others cannot supply. By choosing your car's make, model and engine, you can be confident your vehicle gets the components it needs. We combine expert know-how with prompt EU-wide dispatch from our Swedish warehouse and customer support that understands the technical challenges of your vehicle's drivetrain.

Frequently Asked Questions about Drivetrain for Hummer Hummer H2 SUT – Spare Parts & Drive Shafts

What are the most common signs of a failing drive shaft on my Hummer H2 SUT?

The most common symptoms are clicking noises when turning, vibrations through the steering wheel or floor under acceleration, and visible grease on the inside of the wheel rim from a split CV boot.

Do your drive shafts fit both the standard H2 and the H2 SUT?

Yes, our parts are precisely matched to specific chassis types. By selecting your exact model and engine specifications, you can be sure the part will fit your particular SUT version.

Why should I replace the complete drive shaft instead of just the CV joint?

On heavy vehicles such as the Hummer H2 SUT, it is often more cost-effective and dependable to replace the complete shaft, as the inner joint and the shaft itself also endure significant wear.

How often should I inspect the CV boots on my Hummer?

We recommend a visual inspection at every oil change or at least once a year, particularly if you drive off-road where the risk of mechanical damage to the rubber is higher.

Are your replacement parts for Hummer of original quality?

Our parts are carefully selected to meet or exceed original equipment specifications, which is essential for handling the substantial torque of a Hummer.

How do I ensure I choose the right part for my vehicle?

You can easily find the correct fitment by selecting your vehicle's make, model, year and engine type in our catalogue, ensuring an exact match despite any model-specific variations.