Hyundai Elantra V

Spare parts and drivetrain components for the Hyundai Elantra V.

Products for Hyundai Elantra V

31 products
25 - 31 of 31
Item no.:340540
  • Position: Front, Inner
  • Inner splines: 30
  • Splines gearbox side: 27
  • Seal diameter: 41 mm
  • Outer diameter: 78 mm
Item no.:344577
  • Position: Front, Inner
  • Inner splines: 22
  • Seal diameter: 30 mm
  • Total length: 145 mm
  • Joint diameter: 79 mm
Item no.:0689748
  • Position: Front
Item no.:143882
  • Position: Front left, Inner
  • Inner splines: 22
  • Splines gearbox side: 25
  • Seal diameter: 41 mm
  • Outer diameter: 81 mm
Item no.:341830
  • Position: Front, Inner
  • Inner splines: 30
  • Splines gearbox side: 27
  • Seal diameter: 30 mm
  • Outer diameter: 73 mm
Showing 25–31 of 31 products

Drivetrain for Hyundai Elantra V

The Hyundai Elantra V, also known by the model code MD, represents a generation of cars focused on comfort and efficiency. To maintain these qualities throughout the vehicle's lifespan, a properly functioning drivetrain is essential. The drivetrain is the system that transfers power from the engine to the wheels, and in a front-wheel-drive car such as the Elantra V, this system is under constant load. Every component, from the gearbox to the wheel hubs, must work together seamlessly to prevent power loss and unnecessary wear. At CVJoint24, we specialise in supplying precisely the parts required to keep your Hyundai in peak condition. Choosing the right spare parts not only ensures your car's reliability but also protects its resale value. Our range is carefully selected to meet the high demands placed on modern vehicles on European roads, where road salt and temperature fluctuations demand superior material quality.

How the drivetrain is engineered on the Hyundai Elantra V

The drivetrain on a Hyundai Elantra V uses a classic front-wheel-drive layout with a transversely mounted engine. Power travels from the engine through the gearbox to two drive shafts. Each drive shaft is fitted with two joints: an inner CV joint mounted against the gearbox and an outer CV joint located at the wheel. The inner joint allows the drive shaft to move up and down in line with the suspension, whilst the outer joint also allows the wheel to steer. This complex mechanism requires constant lubrication, which is maintained by CV boots packed with specialised grease. On the Hyundai Elantra V, precision engineering in these components is critical for preventing vibration. Because this model is frequently used for both city driving and long motorway journeys, the drivetrain is exposed to varied stresses. Understanding how these parts interact is key to diagnosing any issues with the car's power transmission.

Common faults and symptoms

There are several clear signs that the drivetrain on your Hyundai Elantra V is beginning to wear. One of the most common symptoms of a failing inner CV joint is vibration felt through the entire car during acceleration, particularly at speeds between 70 and 100 km/h. If the vibration disappears as soon as you lift off the accelerator, this strongly indicates an inner joint issue. For outer joints, the most frequent symptom is a clicking or knocking sound on full steering lock while driving. In addition to unusual noises, you should inspect the boots regularly. If a CV boot splits, grease escapes and road dirt enters, rapidly ruining the constant velocity joint. On the Hyundai Elantra V, even slight imbalance in the drive shafts can cause premature wear on the gearbox bearings. Ignoring these early warning signs can result in far more expensive repairs later, including total driveshaft failure on the road.

Common replacement parts for the Hyundai Elantra V

When repairing the transmission on this model, certain components regularly require attention. A frequently requested replacement part is an inner CV joint for the Hyundai Elantra V, as these are subjected to significant heat build-up from the engine and gearbox, which can cause the grease to deteriorate prematurely. In addition to individual joints, complete drive shafts are a popular solution for a quick, straightforward replacement. We also see high demand for quality boot kits, which are the most cost-effective insurance against future component failure. By replacing a damaged boot in good time, you can often save the existing joint. For the Hyundai Elantra V, it is vital to choose parts manufactured to exact original specifications to ensure perfect fit and balance. We stock parts thoroughly tested to withstand everyday driving demands, whether daily commuting or family trips.

Finding the right part for your Hyundai Elantra V

Browse the specific category for your Hyundai Elantra V:

When dealing with potential drivetrain issues, starting in the right category saves time. By comparing the exact component sections for the Hyundai Elantra V, it is easier to distinguish between drive shaft, CV joint or propeller shaft issues, leading you directly to the parts that match your symptoms and specifications.

Identifying the exact part that fits your Hyundai Elantra V can sometimes be tricky, as components can vary depending on engine variant and gearbox type. The most reliable way to find the correct fit is to filter by your car's make, model and engine in our shop selector. This displays the parts technically verified for your specific vehicle, eliminating ordering errors and saving time during installation. We also recommend visually checking the old component where possible—such as counting the number of splines (teeth) on the shaft, as this is critical for proper fitment. To help guide your search, we have organised our catalogue clearly. You will find the most relevant sections for your model below:

  • Inner CV joints for Hyundai Elantra V
Following these steps ensures you receive a part that fits right away without any modifications.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist with its warehouse in Helsingborg, Sweden. We offer specialised expertise and an extensive inventory that few general suppliers can match. When you order from us, you get reliable spare parts backed by our accurate fitment guarantee. We know your time matters, so we make it simple to find the right part first time. With our dedication to product quality and fast dispatch across the EU, we help minimise your car's downtime in the garage. As dedicated drivetrain specialists, we know our parts inside out. Whether you are a DIY mechanic or a professional workshop, you benefit from our high-quality range and technical advice. Choosing us means dependable durability, specialist knowledge and a hassle-free purchasing process for your Hyundai, keeping your car running smoothly for many kilometres to come.

Frequently Asked Questions about Drivetrain for Hyundai Elantra V

What are the most common signs that an inner CV joint has failed on my Elantra V?

The most common symptoms are vibrations through the car's bodywork during acceleration, typically most noticeable at higher speeds. The vibrations usually disappear as soon as you lift off the accelerator.

How do I find the right drivetrain parts for my car?

Simply select your Hyundai Elantra V model, year and engine variant on cvjoint24.com to filter out the exact drivetrain parts that fit your specific vehicle.

Do you offer a fitment guarantee on CV joints for Hyundai?

Absolutely, we provide a fitment guarantee so you can be completely confident that the part you order matches your car according to the specifications we list.

How quickly will my spare parts be delivered?

We dispatch orders as quickly as possible from our Swedish warehouse, with rapid dispatch on stocked items so you can get your car back on the road without delay.

Do I need to replace the entire drive shaft if only the CV boot is split?

No, if you catch a damaged boot early and the joint is still in sound condition without any noise or play, it is usually sufficient to replace just the CV boot and repack it with fresh grease.

What is the difference between an inner and an outer CV joint?

The inner CV joint sits next to the gearbox and primarily absorbs suspension movement, whilst the outer CV joint is located at the wheel hub and accommodates both suspension travel and steering angles.