Hyundai Galloper

Spare parts and drivetrain components for the Hyundai Galloper.

Products for Hyundai Galloper

10 products
1 - 10 of 10
Item no.:0216602
  • Bearing thickness: 59 mm
  • Hole spacing c/c: 160 mm
Item no.:0555036
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 56 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Item no.:1173593
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 585 mm
Item no.:2171824
  • Position: Front right
  • Splines gearbox side: 132
  • Splines wheel side: 28
  • Total length: 511 mm
  • Diameter 1: 88 mm
Item no.:0512096
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 28
  • Seal diameter: 56 mm
  • Outer splines: 28
Item no.:0609566
  • Total length: 102 mm
Item no.:0877811
  • Bearing thickness: 59 mm
  • Hole spacing c/c: 160 mm
Item no.:1129749
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 589 mm
  • Diameter 1: 88 mm
Item no.:155019
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 56 mm
  • Outer splines: 28
  • Thread size: M22X1,5

Drivetrain for Hyundai Galloper

The Hyundai Galloper is a robust 4x4 that requires a drivetrain in top condition to handle both daily driving and demanding off-road conditions. Power transmission is at the heart of the vehicle's capability, and here at CVJoint24 you will find the specific components required to maintain that performance. We focus on offering parts that meet the rigorous demands placed on a four-wheel-drive vehicle, where stresses on shafts and joints are often significantly higher than on standard passenger cars. By choosing the right spare parts, you ensure that your Galloper remains dependable and retains its go-anywhere capability.

As drivetrain specialists, we understand that every component in the chain must work seamlessly. From the gearbox out to the wheels, components are subjected to high torque and environmental exposure such as dirt and moisture. Our range for the Galloper is carefully selected to withstand these harsh conditions, giving you peace of mind that your vehicle will perform when it matters most. We combine technical expertise with a comprehensive catalogue to be your go-to partner when maintaining or repairing your vehicle's power transmission.

How the Hyundai Galloper drivetrain is built

The Galloper is built on a classic, proven 4x4 layout featuring a longitudinal engine that delivers power through a gearbox and transfer box to both the front and rear axles. This design relies on several critical points throughout the drivetrain, including front drive shafts and dual propeller shafts. The front suspension uses driveshafts with outer CV joints that accommodate both steering angles and suspension travel while delivering continuous power. The rear axle is driven by a prop shaft that must be perfectly balanced to prevent vibrations.

Understanding this setup is vital when diagnosing noises or vibrations that arise during driving. Because the Galloper is often used for heavy towing or off-road excursions, drivetrain components wear faster than on a road-biased car. Moving parts in particular, such as constant velocity joints and bearings, require regular inspection. A healthy drivetrain not only reduces the risk of breakdowns, but also improves fuel economy and reduces unnecessary wear on tyres and other mechanical assemblies.

Common faults and symptoms

There are several clear warning signs that drivetrain components are starting to fail on a Hyundai Galloper. One of the most typical symptoms of a worn outer CV joint on a Hyundai Galloper is a rhythmic clicking or knocking noise that is clearly audible on full lock while accelerating. This is frequently caused by a split CV boot, which lets in road grit and allows the grease to escape, rapidly accelerating wear across the joint's internal components.

If you instead notice vibrations reverberating through the cabin or chassis, especially at higher speeds or under heavy load, it often points to an unbalanced or worn propeller shaft on the Hyundai Galloper. Acting promptly on these symptoms is essential to prevent secondary damage to the gearbox, transfer case or differentials. A failing drive shaft can also trigger steering wheel shudder or a loose, unstable sensation during acceleration. Catching these early warning signs can save both time and expensive repair bills later on.

Common parts to replace on the Hyundai Galloper

In our range for the Galloper, we have selected the most critical power-transmission parts tailored to the model's exact requirements. We currently provide drive shafts, outer CV joints and propeller shafts engineered to original specifications. These parts are manufactured to meet or exceed OEM standards—essential for a vehicle with the Galloper's working capabilities. Here are the core categories available for your vehicle:

  • Drive shaft for Hyundai Galloper – Complete shafts for a straightforward replacement.
  • Outer CV joint for Hyundai Galloper – High-grade joints for wheel-side repairs.
  • Propeller shaft for Hyundai Galloper – Robust prop shafts for reliable power transfer between axles.

By focusing on these core driveline areas, we guarantee in-depth technical expertise and prompt access to the right components. Every part is tested to cope with the torque outputs of the Galloper's engines, across both petrol and diesel models. Replacing worn components with exact-fit replacements is the best way to retain your vehicle's original driving characteristics.

How to find the right part for your Hyundai Galloper

Navigate directly to the relevant subcategory for your Hyundai Galloper:

On a vehicle with several potential drivetrain issues, it pays to start in the correct section immediately. By comparing the exact component areas for the Hyundai Galloper, diagnosing issues across drive shafts, CV joints or prop shafts becomes far simpler, guiding you straight to the parts matching your symptoms and specifications.

Finding the correct replacement for an off-roader can sometimes prove challenging due to various model updates and production years, but selecting your car's make, model and engine makes filtering the right parts straightforward. This narrows down compatible components, ensuring that you receive parts ready for direct installation. Nevertheless, we always recommend verifying key technical details—such as the spline count on an outer CV joint for the Hyundai Galloper—as factory variations do occur.

In addition to selecting your engine and variant, it is helpful to note whether your vehicle has a manual or automatic gearbox, as well as whether it is a short-wheelbase or long-wheelbase Galloper, as this affects the length of the propeller shaft. If you are unsure which part matches your exact specification, our customer support team is on hand to help confirm technical details. We strive to make maintaining your vehicle simple by ensuring you get the correct parts right from the start.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, operating with a central warehouse in Helsingborg, Sweden. Unlike general car parts retailers, we focus specifically on drivetrains and power transmission components. When you purchase from us, you get quality spare parts chosen by specialists who prioritise accurate fitment and long-term durability. We understand the high demands placed on 4x4 drivetrains and the challenging road conditions across European winters.

With prompt dispatch across the European Union and knowledgeable customer service with real driveline expertise, we are the trusted supplier for DIY mechanics and professional garages alike. We combine high-quality standards with competitive pricing, making it cost-effective to keep your Galloper in peak working order. Our goal is to offer the best buying experience for drivetrain parts, built on technical accuracy and dependable service at every stage.

Frequently Asked Questions about Drivetrain Parts for Hyundai Galloper - High-Quality Spare Parts

How do I know if a drive shaft on my Galloper needs replacing?

The most common signs are vibrations under acceleration, steering wheel wobble, or abnormal noises coming from underneath the vehicle. If the vibrations worsen as speed increases, this often indicates an imbalance or wear in the drive shaft.

Can I replace just the outer CV joint, or do I need to replace the entire shaft?

On the Hyundai Galloper, you can often replace just the outer CV joint if the shaft itself is otherwise undamaged. This is a cost-effective solution if the issue was caused by a split CV boot and subsequent wear in the joint.

How do I know which propeller shaft fits my Hyundai Galloper?

The most reliable method is to select your car's make, model, and engine in our vehicle selector. You should also check the length of your current shaft, as dimensions can differ between the short-wheelbase (3-door) and long-wheelbase (5-door) variants.

What is included when I purchase an outer CV joint from you?

Our CV joint kits are normally supplied complete with the joint itself, a vehicle-specific CV boot, high-performance grease, circlips, and the necessary clamps for a full installation.

Why does my car vibrate at higher speeds?

Vibrations at higher speeds are frequently down to an imbalanced propeller shaft or worn centre bearings. A damaged drive shaft can also be the cause. We recommend inspecting the prop shaft for signs of damage or missing balance weights.

Are your drivetrain parts equivalent to original equipment parts?

Yes, our spare parts are manufactured to meet or exceed OE quality standards. As driveline specialists, we only select components capable of handling the demanding loads of the Galloper's four-wheel-drive system.