Hyundai Getz

Spare parts and drivetrain components for Hyundai Getz.

Products for Hyundai Getz

48 products
1 - 24 of 48
Item no.:0336106
  • Position: Front
  • ABS teeth: 48
  • Inner diameter: 62 mm
  • Outer diameter: 76 mm
  • Width: 8 mm
Item no.:331899
  • ABS teeth: 48
  • Inner diameter: 62 mm
  • Outer diameter: 76 mm
  • Width: 8 mm
Item no.:1157337
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 625 mm
  • ABS teeth: 48
Item no.:2152407
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 911 mm
  • ABS teeth: 48
Item no.:2181914
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 915 mm
  • ABS teeth: 48
Item no.:7317301
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 914 mm
  • ABS teeth: 48
Item no.:1168194
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 625 mm
  • ABS teeth: 48
Item no.:1111895
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 25
  • Total length: 633 mm
  • ABS teeth: 48
Item no.:2161748
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 578 mm
  • ABS teeth: 48
Item no.:0571232
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 50 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:1186958
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 648 mm
  • ABS teeth: 48
Item no.:2180118
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 897 mm
  • ABS teeth: 48
Item no.:0527353
  • Position: Outer
  • Inner splines: 19
  • Seal diameter: 50 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:1131386
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 30
  • Total length: 665 mm
  • ABS teeth: 52
Item no.:0921811
  • Diameter: 32 mm
Item no.:0975655
  • Inner diameter: 35 mm
  • Outer diameter: 56 mm
Item no.:349809
  • Position: Front, Inner
  • Inner splines: 22
  • Seal diameter: 35 mm
  • Total length: 150 mm
  • Joint diameter: 74 mm
Item no.:351706
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 52 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:0603107
  • Total length: 99 mm
Item no.:340949
  • Position: Front, Inner
  • Inner splines: 22
  • Seal diameter: 35 mm
  • Total length: 141 mm
  • Joint diameter: 74 mm
Item no.:0995928
  • Inner diameter: 39 mm
  • Outer diameter: 61 mm
Item no.:690235
  • Position: Rear
Showing 1–24 of 48 products

Hyundai Getz drivetrain

The Hyundai Getz is renowned as a reliable and economical small car, but just like any vehicle, its drivetrain requires regular maintenance and the occasional replacement of wear items. The driveline is the heart of your vehicle's motion, and on a front-wheel-drive car like the Getz, these components endure substantial strain during both acceleration and cornering. At CVJoint24, we specialise in supplying precisely the right parts to keep your car running quietly and safely on the road. With our extensive range for this specific model, we offer dependable solutions for most issues concerning drive shafts and joints.

Investing in high-quality spare parts for your Hyundai Getz is crucial to prevent consequential damage to the gearbox and suspension. By choosing high-precision components, you ensure that engine power is transferred to the wheels without unnecessary energy loss or intrusive noises. We focus on supplying parts that meet or exceed original equipment specifications, delivering a safe and dependable driving experience for many kilometres to come.

How the drivetrain is engineered on the Hyundai Getz

The drivetrain of a Hyundai Getz is built around a classic front-wheel-drive layout with a transversely mounted engine. The system primarily comprises two drive shafts transferring torque from the gearbox to the front wheels. Each drive shaft is fitted with two constant velocity joints: an inner CV joint mounted against the gearbox and an outer CV joint situated at the wheel hub. The outer joint is especially critical as it must deliver power smoothly whilst the wheel steers and moves vertically with the suspension.

Alongside the shafts themselves, the ABS ring plays a vital role in the vehicle's safety systems. On the Hyundai Getz, this ring is frequently mounted directly on the outer CV joint. It transmits signals to the ABS sensors so the system can monitor wheel rotation speed. If a Hyundai Getz ABS ring cracks or corrodes—a common issue on salted European roads—it can trigger an ABS warning light or cause the system to malfunction. Understanding this layout makes it much easier to diagnose faults and choose the correct replacement car parts.

Common faults and symptoms

Several clear symptoms indicate that drivetrain components on your Hyundai Getz are beginning to fail. One of the most typical signs of a worn outer CV joint is a knocking or clicking sound heard on full steering lock during acceleration. This frequently occurs when lubricating grease has escaped through a split CV boot, allowing grit to penetrate and cause severe mechanical wear. If you experience vibrations through the car body under acceleration instead, this often points to an unbalanced or worn inner CV joint or driveshaft.

Another frequent issue on the Hyundai Getz relates to the braking system but originates directly in the drivetrain. If the ABS warning light illuminates on the instrument panel, a cracked ABS reluctor ring is often the culprit. Exposed to harsh weather and road salt, rust builds up beneath the ring, creating tension that eventually snaps it. This disrupts the sensor signal and disables the safety system. Spotting these symptoms early saves you time and expense, allowing you to replace the faulty component before it leads to an unexpected breakdown.

Common parts to replace on the Hyundai Getz

Depending on vehicle mileage and driving conditions, certain components feature frequently in our customers' orders. Here are the most relevant categories for your Hyundai Getz:

  • Drive shaft for Hyundai Getz – Complete, ready-to-fit shafts, often the most time-efficient repair for major wear.
  • Outer CV joint for Hyundai Getz – The component replaced most often when clicking noises occur on cornering.
  • ABS ring for Hyundai Getz (1 available item) – A cost-effective solution when the wheel sensor logs fault codes while the CV joint remains intact.

By offering several drive shaft variations, we cater for most engine options and model years of the Getz. Drive shafts can vary depending on whether the car has a manual or automatic gearbox, as well as whether ABS is fitted. Our range is tailored to accommodate these technical differences with exacting precision.

How to find the right part for your Hyundai Getz

Navigate directly to the appropriate subcategory for the Hyundai Getz:

On a vehicle where various drivetrain faults can show similar symptoms, starting in the right category is essential. By comparing the exact component sections for the Hyundai Getz, it is simple to distinguish between drive shaft, CV joint or propeller shaft issues, taking you straight to the page that matches your symptoms and fitment.

Identifying the exact part for your Hyundai Getz can occasionally be tricky, as vehicle manufacturers introduce technical updates across a model run. The most reliable way to select the right component is to filter by your car's make, model and engine variant in our shop. This narrows the selection to fully compatible parts, ruling out mistakes and saving you valuable workshop time.

When deciding between a complete drive shaft and an individual CV joint, factor in the labour involved. Fitting a complete Hyundai Getz drive shaft is often far quicker and simpler for the DIY mechanic than dismantling and rebuilding a joint on an existing shaft. You can also double-check details like the tooth count on the ABS ring and the spline count at the ends of the shaft for absolute peace of mind. We always recommend inspecting both sides of the vehicle, as driveline wear is frequently symmetrical.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching across the EU directly from our central warehouse in Helsingborg, Sweden. We stand out from general car parts retailers thanks to our deep technical expertise and dedicated product range. When ordering from us, you benefit from specialist driveline knowledge, meaning we understand the mechanical needs of your Hyundai Getz inside out. Our comprehensive stock ensures the parts you need are readily available.

We combine high component quality with a seamless purchasing experience. By selecting your car's exact make, model and engine, you can order with absolute confidence. We know that a car up on axle stands requires parts without delay, which is why we process and dispatch your spare parts swiftly. Choose an expert that truly understands drivetrains—choose CVJoint24 for your Hyundai Getz.

Frequently Asked Questions about Drivetrain for Hyundai Getz - Spare Parts & Drive Shafts

How do I know whether to replace the complete drive shaft or just the CV joint on my Getz?

If you only hear clicking noises when cornering, replacing the outer CV joint is often sufficient. If, on the other hand, you experience severe vibrations or the shaft is corroded and bent, replacing the complete drive shaft is safer and often more cost-effective.

Does the same drive shaft fit both the right and left side on the Hyundai Getz?

No, the drive shafts are usually different lengths on the right and left sides due to the position of the gearbox. Always check the product description to confirm which side the part is intended for.

Why is the ABS warning light illuminated even though the brakes work properly?

On the Hyundai Getz, a cracked ABS ring is a very common fault. When the ring cracks, the sensor cannot read wheel speed correctly, which triggers the warning light. We sell separate ABS rings that can be fitted directly onto your existing joint.

Are the CV boot and grease included when I buy an outer CV joint?

Yes, our CV joint kits for the Hyundai Getz are supplied as complete kits including the CV joint, CV boot, grease, clamps and, where required, a new hub nut or circlip.

Can I easily find the right parts for my Hyundai Getz?

Absolutely! Selecting your Hyundai Getz by make, model, year and engine variant on our site is the most reliable way to filter out the exact parts that fit your specific car.

What tools are needed to replace a drive shaft on a Getz?

You generally need a heavy-duty socket for the hub nut (often 30 mm or 32 mm), a trolley jack, axle stands, and standard sockets and spanners to release the ball joint and suspension control arm.