Hyundai Grand Santa FE

Spare parts and drivetrain components for Hyundai Grand Santa FE.

Products for Hyundai Grand Santa FE

26 products
1 - 24 of 26
Item no.:2198042
  • Position: Front right
  • Total length: 610 mm
  • Splines gearbox side: 26
  • Splines wheel side: 30
  • ABS teeth: 52
Item no.:4167546
  • Position: Rear left
  • Total length: 847 mm
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • ABS teeth: 52
Item no.:0524000
  • Position: Outer
  • ABS teeth: 52
  • Seal diameter: 54 mm
  • Inner splines: 35
  • Outer splines: 30
Item no.:246551
  • Position: Front right, Inner
  • Seal diameter: 42 mm
  • Inner splines: 35
  • Diameter: 42 mm
  • Splines gearbox side: 28
Item no.:147982
  • Position: Front left, Inner
  • Seal diameter: 36 mm
  • Inner splines: 35
  • Diameter: 36 mm
  • Splines gearbox side: 31
Item no.:144705
  • Position: Front left, Inner
  • Inner splines: 33
  • Splines gearbox side: 28
Item no.:217171
  • Position: Front right
  • Total length: 422 mm
  • Splines gearbox side: 28
  • Splines wheel side: 28
Item no.:145788
  • Position: Front left, Inner
  • Inner splines: 35
  • Splines wheel side: 31
Item no.:620015
  • Position: Rear
Item no.:117890
  • Position: Front left
  • Total length: 667 mm
  • Splines gearbox side: 28
  • Splines wheel side: 30
  • ABS teeth: 52
Item no.:1143632
  • Position: Front left
  • Total length: 654 mm
  • Splines gearbox side: 31
  • Splines wheel side: 30
  • ABS teeth: 52
Item no.:0586307
  • Position: Outer
  • ABS teeth: 52
  • Seal diameter: 54,5 mm
  • Inner splines: 26
  • Outer splines: 30
Item no.:0599227
  • Position: Outer
  • Inner splines: 20
  • Outer diameter: 73 mm
  • Splines wheel side: 30
  • ABS teeth: 52
Item no.:218837
  • Total length: 590 mm
  • Splines gearbox side: 28
  • Splines wheel side: 30
  • ABS teeth: 52
Item no.:118215
  • Position: Front left
  • Total length: 673 mm
  • Splines gearbox side: 28
  • Splines wheel side: 30
  • ABS teeth: 52
Item no.:1508883
  • Position: Front left, Outer
Item no.:0478552
  • Position: Inner
  • Inner splines: 23
  • Outer diameter: 79 mm
  • Splines wheel side: 25
Item no.:114050
  • Splines wheel side: 30
  • ABS teeth: 52
Item no.:2124764
  • Position: Front right
  • Total length: 611 mm
  • Splines gearbox side: 28
  • Splines wheel side: 30
  • ABS teeth: 52
Item no.:513946
  • Position: Rear right
  • Total length: 827 mm
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • ABS teeth: 52
Item no.:629025
  • Position: Rear
Item no.:0194534
  • Position: Front left
  • Total length: 675 mm
Showing 1–24 of 26 products

Drivetrain for Hyundai Grand Santa FE

Maintaining the drivetrain on a Hyundai Grand Santa FE is crucial to ensuring that your car transfers power efficiently under all driving conditions. As a larger, heavier SUV, its drivetrain components are subjected to significant stress, especially during acceleration and when driving with heavy loads. At CVJoint24, we are specialists in all car makes and offer a comprehensive range tailored specifically for this model. We focus on supplying parts that meet or exceed original equipment specifications, giving your car the reliability it deserves.

Our range for the Hyundai Grand Santa FE currently includes 9 specific items, reflecting our expertise and dedication to offering complete driveline solutions. By selecting the correct components, you reduce the risk of consequential damage to the gearbox and suspension, while preserving the comfort and stability that define this model. We help you navigate technical requirements to find the most durable solution for your vehicle.

How the drivetrain is engineered on the Hyundai Grand Santa FE

The drivetrain on a Hyundai Grand Santa FE is an intricate assembly engineered to handle high torque and deliver optimal traction. The system consists of several interacting parts transferring power from the engine through the gearbox out to the wheels. Central to this system are the drive shafts, which must be both flexible and exceptionally strong to cope with the angles created by steering and suspension movement. The outer CV joint plays a pivotal role here, allowing the wheel to steer while power is continuously delivered.

Because the Hyundai Grand Santa FE is often equipped with all-wheel drive, there are especially high demands for all drivetrain components to remain properly synchronised and in sound condition. Any imbalance or wear in a single component can quickly propagate through the entire system, causing vibrations or noises. Understanding this layout is the first step towards proper maintenance, and at CVJoint24 we offer the technical expertise and spare parts required to keep your car's power delivery in peak condition year after year.

Common faults and symptoms

There are several clear signs that the drivetrain in your Hyundai Grand Santa FE is wearing out. One of the most common symptoms of a defective outer constant velocity joint is a clicking or knocking noise when making sharp turns at low speeds. This is frequently caused by grease leaking out due to a split CV boot, leading to metal-on-metal contact and rapid wear of the internal components. If ignored, the joint can fail completely, leaving the vehicle stranded.

Another common symptom is vibration felt through the steering wheel or chassis during acceleration. This can point to an imbalance or internal wear in a drive shaft. For a heavy SUV like the Hyundai Grand Santa FE, it is vital to heed these vibrations before they cause damage to surrounding suspension parts. If you notice shuddering at specific speeds or under load, it is time to inspect the driveshafts and their mountings to ensure safe driving.

Common parts to replace on the Hyundai Grand Santa FE

When repairing the drivetrain on this model, two main categories stand out in our range. We have optimised our stock to meet the most frequent needs for this vehicle. Here are the categories most relevant to your Hyundai Grand Santa FE:

  • Drive shafts for Hyundai Grand Santa FE (7 available items) – Complete shafts replacing worn original units for both left and right sides.
  • Outer CV joints for Hyundai Grand Santa FE (2 available items) – Precision components to eliminate clicking noises and restore smooth power transfer when steering.

Replacing a complete drive shaft is often a cost-effective solution compared to rebuilding individual components, as you obtain fresh constant velocity joints and boots at the same time. This minimises the risk of recurring issues and ensures a longer repair life. Our parts are selected to withstand tough European roads and the demands of SUV driving.

How to find the right part for your Hyundai Grand Santa FE

Go directly to the right category for your Hyundai Grand Santa FE:

On a vehicle with several possible drivetrain issues, it pays to start in the correct category straight away. By comparing the exact sections for the Hyundai Grand Santa FE, it is simpler to distinguish between drive shaft, CV joint or propeller shaft faults and navigate to the page that best matches your symptoms and fitment.

Identifying the exact component that matches your Hyundai Grand Santa FE can sometimes be challenging due to different engine variants and trim specifications. The most reliable way to find the correct fit is by selecting your car's make, model and engine in our vehicle filter. This will display the items compatible with your car, eliminating guesswork around spline counts, shaft lengths and other technical details that vary across model years.

In addition to using the vehicle selector, check specific vehicle attributes such as automatic or manual gearbox. We also recommend inspecting the existing part visually where possible, confirming that connectors and dimensions align with our detailed product descriptions. Our customer support team is always on hand if you require further assistance regarding fitment and specifications for your Hyundai Grand Santa FE.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, sending orders across the EU from our central warehouse in Helsingborg, Sweden. When you source parts for your Hyundai Grand Santa FE from us, you benefit from specialist expertise that general car-parts stores often lack. Every item in our hand-picked range is chosen for premium quality and exact fitment, which is vital for vehicle longevity and safety.

We combine fast dispatch with an intuitive platform where searching by make, model and engine ensures a hassle-free purchase. By focusing specifically on niche driveline components such as drive shafts and CV joints, we maintain high stock availability of the latest parts for your Hyundai Grand Santa FE. Choose CVJoint24 for dependable parts, expert knowledge and dedicated customer support.

Frequently Asked Questions about Drivetrain Parts for Hyundai Grand Santa FE

How many drive shafts are available for Hyundai Grand Santa FE?

We currently offer 7 dedicated drive shafts in our range tailored for the Hyundai Grand Santa FE, covering most requirements for the model.

What are the most common symptoms of a worn CV joint on my Grand Santa FE?

The most common signs are a clicking noise when cornering sharply and vibrations under acceleration. You should also check if the CV boot is split or damaged.

How do I find the right parts for my car?

Simply select your Hyundai Grand Santa FE's exact model, year and engine variant to filter and find the 9 parts that fit your vehicle precisely.

Do you supply both inner and outer CV joints?

For the Hyundai Grand Santa FE, our range focuses primarily on complete drive shafts and outer CV joints, as these are the components subjected to the highest wear in the drivetrain.

Why should I choose a complete drive shaft rather than just replacing the joint?

Replacing the complete drive shaft is often more time-efficient and reliable, as you get new constant velocity joints and boots at both ends, minimising the risk of future wear.

Are the Hyundai Grand Santa FE parts of original equipment quality?

Our components are carefully selected to match or exceed OEM specifications, ensuring exceptional durability and an exact fit.