Hyundai IX20

Spare parts and drivetrain components for Hyundai IX20.

Products for Hyundai IX20

26 products
1 - 24 of 26
Item no.:0375622
  • Position: Front
  • ABS teeth: 46
  • Inner diameter: 68 mm
  • Outer diameter: 82 mm
  • Width: 10 mm
Item no.:0681430
  • Outer diameter: 22 mm
  • Diameter: 78 mm
Item no.:340649
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:1161520
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 687 mm
  • ABS teeth: 46
Item no.:2134343
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 965 mm
  • ABS teeth: 46
Item no.:2114497
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 960 mm
  • ABS teeth: 46
Item no.:215520
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 948 mm
  • ABS teeth: 46
Item no.:1163096
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 677 mm
  • ABS teeth: 46
Item no.:2164022
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 965 mm
  • ABS teeth: 46
Item no.:0560157
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 60 mm
  • Outer splines: 27
  • ABS teeth: 46
Item no.:341917
  • Position: Inner
  • Inner splines: 24
  • Splines gearbox side: 27
  • Total length: 150 mm
Item no.:355400
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 60 mm
  • Outer splines: 27
  • ABS teeth: 46
Item no.:0912384
  • Diameter: 32 mm
Item no.:0686679
  • Total length: 96 mm
Item no.:0964527
  • Inner diameter: 39 mm
  • Outer diameter: 61 mm
Item no.:0973951
  • Inner diameter: 39 mm
  • Outer diameter: 61 mm
Item no.:0507496
  • Position: Front, Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 84 mm
  • ABS teeth: 46
Item no.:110796
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 666 mm
  • ABS teeth: 46
Item no.:119063
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Diameter 1: 77 mm
  • ABS teeth: 46
Item no.:2187579
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 967 mm
  • ABS teeth: 46
Item no.:337854
  • ABS teeth: 46
  • Inner diameter: 68 mm
  • Outer diameter: 82 mm
  • Width: 10 mm
Item no.:0638154
  • Outer diameter: 22 mm
  • Diameter: 78 mm
Showing 1–24 of 26 products

Drivetrain for Hyundai IX20

The Hyundai IX20 is a compact, versatile car that relies on a smoothly operating drivetrain to maintain its agility and fuel economy. The drivetrain is the system responsible for transferring power from the engine to the wheels, and on a front-wheel-drive car like the IX20, this involves a crucial chain of components working under constant load. At CVJoint24, we understand how important it is that every link in this chain meets the highest standards. We have identified specific products tailored precisely to this model, ensuring you find the exact parts needed to keep your vehicle running smoothly. Maintaining the drivetrain is not merely a matter of comfort; it is vital for long-term reliability and prevents expensive consequential damage to the gearbox and suspension.

How the Hyundai IX20 drivetrain is constructed

The drivetrain of a Hyundai IX20 is built around a transversely mounted engine that powers the front wheels. Drive is transferred from the gearbox out to the wheels via two drive shafts. Each drive shaft is fitted with two CV joints: an inner joint positioned closest to the gearbox and an outer joint located at the wheel hub. The outer CV joint is particularly critical because it must deliver power seamlessly while the wheel steers and moves vertically with the suspension. To protect these precision components, durable rubber CV boots packed with specialist grease are fitted. In addition, the IX20 uses an ABS system where an ABS ring for the Hyundai IX20 plays an essential role by relaying precise wheel-speed signals to the vehicle’s safety systems. The entire layout is engineered to be compact and efficient, demanding high-grade materials whenever parts are replaced.

Common faults and symptoms

There are several clear indications that components within your Hyundai IX20 drivetrain are starting to wear out. One of the most typical symptoms is a clicking or knocking noise when taking a sharp turn, which generally indicates that an outer CV joint for the Hyundai IX20 has failed. If you instead feel vibrations through the steering wheel or throughout the whole car under acceleration, this often points to imbalance or wear in a drive shaft. Another frequent issue is the ABS warning light illuminating on the dashboard. This is usually caused by an ABS reluctor ring that has cracked or corroded, disrupting the signal sent to the sensor. Ignoring these symptoms can result in complete mechanical failure, leaving you stranded with no drive, or causing safety systems like ABS and stability control to malfunction. Early diagnosis and timely replacement of worn parts save money and ensure your safety.

Common replacement parts for Hyundai IX20

When repairing your car’s power transmission, certain components are subjected to more stress than others. Drawing on our specialist experience and statistics, the following parts are the most frequently requested for this model. We stock a comprehensive selection covering all the usual requirements to get your vehicle back in peak condition. The following categories are available for your car:

  • Drive shafts for Hyundai IX20 – Complete units that replace the entire shaft assembly for a fast, reliable repair.
  • Outer CV joints for Hyundai IX20 – The most common wear item, frequently replaced when turning noises develop.
  • ABS rings for Hyundai IX20 – A cost-effective fix when only the reluctor ring has suffered damage.

Selecting the appropriate category enables you to quickly navigate to the components matching your specific Hyundai IX20 configuration.

How to find the right part for your Hyundai IX20

Navigate directly to the right category for your Hyundai IX20:

With multiple potential drivetrain faults, it is best to start in the correct section immediately. By comparing the specific subcategories for the Hyundai IX20, you can readily distinguish between issues involving a drive shaft, CV joint, or prop shaft, and proceed to the page that matches your symptoms and fitment.

Choosing the correct spare part for a modern car can be tricky, as variations often exist depending on engine size, gearbox type, and production year. To make the process straightforward and dependable, we always recommend selecting your vehicle’s exact make, model and engine variant. This filters the catalogue down to the parts verified to fit your car. When searching for a drivetrain component, it is also sensible to double-check technical specifications such as the tooth count on ABS rings or spline counts on constant velocity joints to ensure total accuracy. Our database is built to deliver exceptional precision, minimising the risk of being stuck with a dismantled car and a part that does not fit. If you ever need guidance, our expert team is on hand to help you find the right item from our broad inventory.

Why choose CVJoint24

CVJoint24 is not just an ordinary car-parts retailer; we are the international shop of a Swedish driveline specialist, focusing exclusively on drivetrain and transmission components from our central warehouse in Helsingborg, Sweden. Our strength lies in our deep technical expertise and a carefully curated range manufactured to match original equipment standards. We know the harsh conditions European roads and winters subject a vehicle’s underbody to, where road salt and moisture accelerate corrosion on driveshafts and ABS rings. By choosing us, you benefit from a dedicated specialist that prioritises perfect fitment and lasting durability. We provide dependable technical guidance, swift delivery across the EU, and competitive prices to make maintaining your Hyundai IX20 as effortless as possible.

Frequently Asked Questions about Drivetrain Parts for Hyundai IX20

How do I know if my Hyundai IX20 needs a new drive shaft?

The most common signs are vibrations through the car during acceleration or a clunking noise. If a CV boot has been split for some time, dirt is likely to have damaged the joints on the shaft, meaning a replacement is needed.

Why is there a clicking sound when turning in my Hyundai IX20?

A clicking noise on full lock is a classic symptom of a worn outer CV joint. This is usually caused by grease leaking out or dirt penetrating the joint.

Can I replace just the ABS ring on my Hyundai IX20?

Yes, if the CV joint itself is in good condition but the ABS ring has cracked or corroded away, you can buy and fit an individual ABS ring, which makes for a very cost-effective repair.

Do all drive shafts fit all IX20 models?

No, they differ depending on whether the car has a manual or automatic gearbox and which engine is fitted. Always select your car's make, model and engine to find the right part.

What happens if I drive with a split CV boot?

If the boot is split, grease escapes and road dirt gets inside. This rapidly causes the CV joint to wear out and begin making noises, which can eventually lead to complete failure.

Are the parts from CVJoint24 of original equipment quality?

Yes, we only supply premium-quality components with an exact fit, matching the standards required for original parts for the Hyundai IX20.