Hyundai IX55

Spare parts and drivetrain components for the Hyundai IX55.

Products for Hyundai IX55

20 products
1 - 20 of 20
Item no.:1182618
  • Position: Front left
  • Splines gearbox side: 31
  • Splines wheel side: 30
  • Total length: 670 mm
  • ABS teeth: 52
Item no.:2122722
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 30
  • Total length: 618 mm
  • ABS teeth: 52
Item no.:141083
  • Position: Front left, Inner
  • Inner splines: 36
  • Splines gearbox side: 31
  • Seal diameter: 36 mm
  • Outer diameter: 95 mm
Item no.:353266
  • Position: Front, Outer
  • Inner splines: 36
  • Seal diameter: 54 mm
  • Outer splines: 30
  • ABS teeth: 52
Item no.:0661250
  • Total length: 100 mm
Item no.:245630
  • Position: Front right, Inner
  • Inner splines: 36
  • Splines gearbox side: 28
  • Seal diameter: 42 mm
  • Outer diameter: 95 mm
Item no.:292092
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 431 mm
Item no.:695952
  • Position: Rear
  • Inner diameter: 34 mm
  • Outer diameter: 56 mm
Item no.:0947201
  • Inner diameter: 43 mm
  • Outer diameter: 65 mm
Item no.:697485
  • Position: Rear
Item no.:0956308
  • Inner diameter: 36 mm
  • Outer diameter: 47 mm
Item no.:0929560
  • Inner diameter: 61 mm
  • Outer diameter: 82 mm
Item no.:0939049
  • Inner diameter: 55 mm
  • Outer diameter: 76 mm
Item no.:1104359
  • Position: Front left
  • Splines gearbox side: 31
  • Splines wheel side: 30
  • Total length: 670 mm
  • ABS teeth: 52
Item no.:357340
  • Position: Front, Outer
  • Inner splines: 36
  • Seal diameter: 54 mm
  • Outer splines: 30
  • ABS teeth: 52

Drivetrain for Hyundai IX55

The Hyundai IX55 is a powerful and spacious SUV that places exceptionally high demands on its power transmission and mechanical durability. As one of the largest and most robust models in Hyundai's line-up, it is often equipped with high-torque V6 engines, meaning that drivetrain components are subjected to significant stress during both brisk acceleration and demanding off-road driving. Maintaining the car's drivetrain is absolutely vital for preserving the high ride comfort and stability characteristic of this premium model. At CVJoint24, we understand the specific technical challenges of the Hyundai IX55 and therefore offer a carefully selected range of parts engineered to meet or exceed original equipment specifications. By choosing the right spare parts from a specialist, you ensure that engine power reaches the wheels efficiently, quietly, and without vibration, whether driving in heavy city traffic or towing heavy trailers on motorways.

How the Hyundai IX55 drivetrain is constructed

The layout of the drivetrain on a Hyundai IX55 is technically advanced and specifically configured to manage the vehicle's weight and the demands of its four-wheel-drive system. The setup centres around a transverse engine mated to a robust automatic gearbox. This distributes power to the front wheels via heavily dimensioned drive shafts. For models equipped with AWD, power is also sent rearwards via a propeller shaft to a rear differential, which in turn delivers torque to the rear wheels. This complex arrangement demands that every constituent part, from joints and bearings to shafts, works in complete mechanical harmony. Because the IX55 is a heavy car with high towing capacity, each individual component in the system is sized to handle substantial torque loads over the long haul. It is important to remember that even minor imbalances or wear in these rotating components can quickly trigger secondary issues in other areas of the vehicle, making the quality of replacement parts absolutely critical to overall longevity and operational reliability.

Common faults and symptoms

There are several clear warning signs indicating that drivetrain components on your Hyundai IX55 are worn or failing. One of the most typical symptoms is a rhythmic clicking or knocking noise when cornering on full lock, which almost invariably points to a failing outer CV joint. If you instead notice noticeable vibrations through the steering wheel, floor pan, or chassis under acceleration, this can signal internal wear in the constant velocity joints or an imbalance within the drive shaft itself. It is also vital to inspect the condition of the boots regularly; a split or perished CV boot quickly allows road grime, sand, and moisture to enter while flinging out the essential lubricating grease. This leads to accelerated joint breakdown. Identifying these symptoms early through routine checks can save you substantial repair bills, as you can often rectify the issue by replacing a single component before it develops into complete failure that leaves the car undriveable.

Common parts to replace on the Hyundai IX55

When the time comes to replace worn components on this model, drive shafts for the Hyundai IX55 represent the core product range in our catalogue. Due to the vehicle's substantial kerb weight and powerful drivetrain, driveshafts often wear faster than on smaller, lighter passenger cars. We provide complete drive shafts supplied ready for installation with both inner and outer joints as well as pre-fitted CV boots. This is frequently the most time-efficient and cost-effective route for major wear, eliminating the hassle of pressing apart worn, contaminated assemblies. Alongside the drive shafts themselves, it is prudent to check the condition of wheel bearings and ABS rings during replacement, as these sit directly adjacent to the shaft ends. Choosing a complete unit from us ensures that all integrated components maintain the same uncompromising quality and exact factory fitment, minimising any risk of future driveline noise or vibration.

Finding the right part for your Hyundai IX55

Select the relevant category for your Hyundai IX55:

With multiple potential drivetrain faults on a vehicle of this size, starting in the right category saves time. By narrowing down the specific components for the Hyundai IX55, it is easier to isolate issues between drive shafts, CV joints, or propeller shafts and navigate directly to the page that matches your symptoms and fitment needs.

Sourcing replacement parts for a specialised SUV like the IX55 can sometimes seem daunting, but at CVJoint24 we have made the entire process simple and dependable. The most reliable way to find the correct component is to select your car's make, model, and engine variant in our store catalogue. This filters our selection directly to parts tailored to your specific vehicle configuration and driveline. Because technical differences can occur across model years, gearbox types, and engine variants, we always recommend verifying key specifications—such as shaft length and spline counts—if multiple alternatives are listed. Here you will find the most relevant categories for your vehicle:

  • Drive shafts for Hyundai IX55
Our comprehensive catalogue is configured to help you locate the correct match immediately, saving valuable workshop time and avoiding costly wrong orders. If you ever need guidance choosing parts for your Hyundai, our technical specialists are always on hand to assist across our entire range.

Why shop at CVJoint24

When you purchase your replacement components from CVJoint24, you are choosing a Swedish driveline specialist dedicated to drivetrain and power transmission parts. We stand apart from general motor factors thanks to our focused expertise and commitment to technical precision. We offer a comprehensive fitment guarantee on all our products, giving you complete peace of mind that the parts you order will fit your Hyundai IX55 seamlessly. Guided by our principles of getting it right first time with consistently accurate deliveries, we work continually to minimise your vehicle's downtime. We understand the need for prompt repairs, shipping rapidly across the European Union directly from our central warehouse in Helsingborg, Sweden. Our goal is to be the go-to partner for European motorists and garages who refuse to compromise on quality and require components engineered to last for thousands of kilometres. With us, you receive not just a spare part, but access to deep technical knowledge that keeps your vehicle performing at its best.

Frequently Asked Questions about Drivetrain Parts for Hyundai IX55

How do I know if my Hyundai IX55 needs a new drive shaft?

The most common signs are a rhythmic clicking noise during sharp turns or noticeable vibrations through the chassis under acceleration.

How do I find the right parts for my car?

Simply select your Hyundai IX55 make, model and engine variant in our store; it is the most reliable way to identify the exact parts that fit your specific vehicle.

What is included with a complete drive shaft for the IX55?

Our complete drive shafts are supplied ready to install, fitted with both inner and outer CV joints as well as pre-assembled, grease-packed CV boots.

Why do drivetrain components wear out on the IX55 in particular?

The vehicle's high kerb weight combined with torque-rich engines puts substantial stress on the drive shafts and CV joints, especially under heavy loads or off-road driving.

Does the fitment guarantee apply to my Hyundai?

Yes, we offer a comprehensive fitment guarantee on all parts identified and ordered using our vehicle model and engine selector.

How quickly can my spare parts be delivered?

All in-stock items are dispatched promptly from our warehouse to ensure you can repair your vehicle as quickly as possible.