Hyundai Tiburon II

Welcome to your specialist for Hyundai Tiburon II drivetrain components. We stock an extensive range of high-quality parts engineered to keep your car's power transfer operating smoothly...

Products for Hyundai Tiburon II

3 products
1 - 3 of 3
Item no.:217066
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 937 mm
  • ABS teeth: 44
Item no.:332232
  • ABS teeth: 44
  • Inner diameter: 62 mm
  • Outer diameter: 72 mm
  • Width: 8 mm
Item no.:0680967
  • Total length: 102 mm

Drivetrain for Hyundai Tiburon II

The Hyundai Tiburon II, also known as the second-generation sports coupé, requires a properly functioning drivetrain to maintain its characteristic driving pleasure and sporty road manners. As a front-wheel-drive car, its transmission components endure considerable stress during sharp acceleration and spirited cornering. At CVJoint24, we offer a specialist range engineered for this exact model, ensuring power transfer from the gearbox to the wheels takes place without loss, vibration or unwanted noises. By focusing on high-quality spare parts, we help you prolong the lifespan of your car and maintain its original performance.

Our selection is carefully tailored to meet the technical demands of Hyundai and their specific engineering. Maintaining the drivetrain is not simply a matter of comfort, but fundamentally an issue of safety. A worn drive shaft or a cracked ABS ring can ultimately cause a breakdown or prevent the car's safety systems from operating correctly. This is why we only supply car parts that satisfy our rigorous standards for durability and precision.

How the drivetrain works on the Hyundai Tiburon II

The layout of the drivetrain on a Hyundai Tiburon II follows the classic design for front-wheel-drive cars with a transverse engine. Power is generated by the engine and routed through the gearbox, where it is distributed to the two drive shafts. Each drive shaft is a complex unit consisting of an inner and an outer CV joint. The inner joint mounts directly to the gearbox and is primarily responsible for accommodating vertical suspension travel. The outer joint, positioned at the wheel hub, is even more complex technically, as it must handle both suspension movements and wide steering angles while continuously transferring power.

For these precision components to work smoothly, they are packed with specialist grease and protected by CV boots. These boots are vital to the life of the system, keeping the grease in place while sealing out dirt, water and road salt. In addition to the mechanical drive components, the Hyundai Tiburon II features ABS rings on the driveshafts. These rings have a toothed surface that is read by a sensor, allowing the car's control unit to monitor wheel speed and modulate braking pressure whenever necessary. A healthy drivetrain is therefore a seamless interplay between mechanical and electronic parts.

Common faults and symptoms

Several clear symptoms point to a failing drivetrain on your Hyundai Tiburon II that needs attention. One of the most typical signs is a rhythmic clicking or knocking noise when making sharp turns, particularly under acceleration. This sound almost always points to a worn outer constant velocity joint that has developed play. If you instead experience vibrations through the steering wheel or bodywork when accelerating in a straight line, it can indicate an unbalanced drive shaft or an inner CV joint that is beginning to fail.

Another common warning sign relates to the braking system. If the ABS light illuminates on the instrument panel, or if you feel the ABS pulsing through the brake pedal during gentle stops at low speed, a cracked or heavily corroded ABS ring is frequently the culprit. Finally, inspect the CV joint boots on a regular basis. Noticing grease splattered on the inside of the wheel rim or wheel arch is a telltale sign of a split boot. If this is not sorted quickly, grit will contaminate and ruin the CV joint, resulting in a considerably more expensive repair.

Common parts to replace on the Hyundai Tiburon II

For the Hyundai Tiburon II, three component groups see frequent demand in our catalogue. Selecting the right part at the right time will save both time and money. Here are the most common categories for this model:

  • Drive shaft for Hyundai Tiburon II – We provide complete drive shafts that arrive ready to install, which is the most reliable remedy when wear is extensive.
  • CV boot for Hyundai Tiburon II – Renewing a perished or damaged boot early is the most cost-effective insurance against having to replace the entire CV joint later.
  • ABS ring for Hyundai Tiburon II – A compact yet crucial component that frequently corrodes on harsh European roads and triggers braking system error codes.

These parts are chosen specifically to match the original factory specifications of the Tiburon II. We make sure our products match or exceed OEM quality so you can depend on your car in every driving situation. Whether you are doing the job yourself at home or using a professional garage, quality components are the foundation of a successful repair.

Find the right part for your Hyundai Tiburon II

Navigate directly to the relevant category for your Hyundai Tiburon II:

When dealing with a vehicle that has multiple potential drivetrain issues, it pays to start in the correct category straight away. Reviewing the dedicated component sections for the Hyundai Tiburon II makes it easier to diagnose drive shaft, CV joint or prop shaft problems and proceed to the exact parts that match your symptoms and fitment requirements.

Sourcing replacement parts can sometimes seem confusing, but at CVJoint24 we have made finding the correct fit straightforward. Simply choose your car's make, model and engine from our vehicle selector to filter our catalogue down to the exact parts engineered for your Hyundai Tiburon II. We maintain a targeted range in stock to address the most critical driveline issues for this model, ensuring you find what you need without delay.

When selecting your parts, a few technical details are worth double-checking. Note whether your car has a manual or automatic gearbox, as this can affect driveshaft design and dimensions. It is equally important to confirm whether you require a left-hand or right-hand side component, as drive shafts often vary in length depending on the position of the gearbox. For ABS reluctor rings, the tooth count is the key determining factor. Thanks to our expertise and detailed technical data, you can order with full confidence that your components will fit first time.

Why shop with CVJoint24

As a Swedish driveline specialist shipping throughout Europe, we offer a combination of technical knowledge and dedicated product depth that general car parts suppliers rarely match. When you order from us, you receive high-grade components backed by our exact fit guarantee. We know your time is valuable, which is why we ensure you get the right component first time without the hassle of unnecessary returns or misordered parts. Our dedication to quality means dependable performance for your Hyundai Tiburon II.

We appreciate that a drivetrain defect often takes a car off the road, disrupting daily life. We dispatch all our in-stock components promptly from our central warehouse in Helsingborg, Sweden, ensuring your order reaches you across the EU as quickly as possible. By shopping at CVJoint24, you choose a specialist that focuses entirely on power transmission and has the expertise to support you from problem diagnosis to final fitting. Your Hyundai deserves genuine engineering quality, and that is precisely what we provide.

Frequently Asked Questions about Drivetrain Parts for Hyundai Tiburon II

How do I know if a CV joint is failing on my Hyundai Tiburon II?

The most common symptom is a clicking noise when turning on full lock while driving. Vibrations during acceleration can also indicate wear in the inner constant velocity joints.

Does the same drive shaft fit both the right and left side?

No, the right and left drive shafts are usually of different lengths on the Hyundai Tiburon II due to the position of the gearbox. Always check the specifications for the relevant side.

Why is the ABS warning light on even though the brakes feel fine?

On the Hyundai Tiburon II, a cracked or contaminated ABS ring is a very common cause of the sensor transmitting incorrect readings, triggering the warning light.

Can I replace just the CV boot if it has split?

Yes, if you catch the split early before dirt has entered to damage the CV joint itself, it is usually sufficient to replace the CV boot and repack it with fresh grease.

How do I find the exact right ABS ring for my car?

Select your vehicle by make, model and engine variant in our store. It is also good practice to count the number of teeth on the old ring to ensure a 100% accurate match.

Are grease and clips included when I buy a CV boot from you?

Yes, our CV boot kits for the Hyundai Tiburon II come complete with the necessary specialist grease and securing clips for a straightforward installation.