KIA Ceed SW

Spare parts and drivetrain components for the KIA Ceed SW.

Products for KIA Ceed SW

50 products
25 - 48 of 50
Item no.:2108308
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 939 mm
  • ABS teeth: 46
Item no.:0502970
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 27
  • Outer diameter: 79 mm
  • ABS teeth: 46
Item no.:1143497
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 660 mm
  • ABS teeth: 46
Item no.:2167085
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 940 mm
  • ABS teeth: 46
Item no.:0601263
Item no.:2187102
  • Splines gearbox side: 28
  • Splines wheel side: 27
  • ABS teeth: 46
Item no.:2120261
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 937 mm
  • ABS teeth: 46
Item no.:0940879
  • Diameter: 32 mm
Item no.:0635247
  • Total length: 107 mm
Item no.:141686
  • Position: Front left, Inner
  • Inner splines: 22
  • Splines gearbox side: 27
  • Seal diameter: 41 mm
  • Outer diameter: 81 mm
Item no.:0650500
Item no.:1163556
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 657 mm
Item no.:2193979
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 939 mm
  • ABS teeth: 46
Item no.:1139210
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 655 mm
  • ABS teeth: 46
Item no.:2178517
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 940 mm
  • ABS teeth: 46
Item no.:112843
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 668 mm
  • ABS teeth: 46
Item no.:117669
  • Splines gearbox side: 28
  • Splines wheel side: 27
  • ABS teeth: 46
Item no.:0563644
  • Position: Outer
  • Inner splines: 23
  • Splines wheel side: 27
  • Outer diameter: 82 mm
  • ABS teeth: 46
Item no.:214928
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 940 mm
  • ABS teeth: 46
Item no.:215394
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 27
  • Total length: 950 mm
  • ABS teeth: 46
Item no.:118012
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 27
  • Total length: 655 mm
  • ABS teeth: 46
Item no.:1165494
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 27
  • Total length: 655 mm
  • ABS teeth: 46
Item no.:2166067
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 27
  • Total length: 950 mm
  • ABS teeth: 46
Item no.:0914421
Showing 25–48 of 50 products

Drivetrain for KIA Ceed SW

The KIA Ceed SW is a popular family estate that relies on a smoothly operating drivetrain to deliver the refined driving dynamics and fuel efficiency the car is known for. The drivetrain forms the core of your vehicle's power transmission, transferring power reliably from the engine and gearbox to the driven wheels. For the KIA Ceed SW, this usually means a front-wheel-drive layout where the components endure substantial loads under acceleration and hard cornering. Keeping these parts in good order is essential to prevent costly consequential damage to the gearbox or suspension. At CVJoint24, we understand the need for exact precision and offer components that meet or exceed original equipment standards, giving you complete confidence on the road for many kilometres to come. Fitting the right car parts substantially prolongs the working life of your vehicle.

How the drivetrain is engineered on the KIA Ceed SW

The drivetrain on the KIA Ceed SW is engineered to be compact and efficient. The layout primarily relies on drive shafts connecting the gearbox differential to the front wheels. Each drive shaft features two joints: an inner CV joint that allows axial plunge as the suspension articulates, and an outer CV joint that permits steering angles while constantly transferring power. To shield these precision-engineered components, durable rubber CV boots packed with specialised grease are fitted. The KIA Ceed SW also uses an ABS system where an ABS ring is frequently seated on the outer constant velocity joint or directly on the shaft to transmit wheel-speed signals to the safety modules. This degree of integration demands exact dimensions so that replacement car parts work seamlessly with the vehicle's electronic and mechanical setups. Without accurate manufacturing tolerances, you risk abnormal noises, vibrations and fault codes.

Common faults and symptoms

Several distinct warning signs indicate that the drivetrain on your KIA Ceed SW is worn. One of the most typical symptoms is a sharp clicking or knocking noise on full steering lock during acceleration, which usually points to a failing outer CV joint. If you feel noticeable vibrations through the body shell under load instead, this often suggests an inner CV joint has developed excess play. Another frequent issue is an illuminated ABS warning light or erratic ABS intervention at low speeds, commonly caused by a cracked or corroded ABS ring. Regular inspection of the drive shaft boots is also crucial; a split CV boot lets road grit and moisture inside, quickly ruining the joint bearings and triggering expensive repairs if left unaddressed. Ignoring these early warning signs can eventually lead to complete mechanical breakdown on the road.

Common parts to replace on the KIA Ceed SW

Based on our experience and parts data, certain components require replacement more regularly on the KIA Ceed SW. The outer CV joint takes heavy punishment because of the extreme operating angles encountered during steering manoeuvres. We also see frequent demand for complete drive shafts when both inner and outer joints show wear or when the shaft itself has developed run-out. The ABS ring is another critical part that suffers from corrosion under harsh European winter conditions, leading to cracks and faulty wheel-speed data. Choosing model-specific car parts from our range ensures your KIA Ceed SW retains its factory performance. We stock products across this model family, covering complete driveshafts, outer CV joints and ABS reluctor rings tailored to the various engine options and model years on the road today.

How to find the correct part for your KIA Ceed SW

Navigate directly to the appropriate section for your KIA Ceed SW:

When diagnosing drivetrain problems, starting in the right product category saves time. By evaluating the specific parts for the KIA Ceed SW, it becomes straightforward to distinguish between faults in the drive shafts, constant velocity joints or propeller shafts and continue to the page that matches your car's symptoms and fitment.

Select your vehicle's make, model and engine via these links to access the exact replacement parts for your drivetrain and order with absolute peace of mind.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, sending parts across the EU from our central warehouse in Helsingborg, Sweden. Unlike general motor factors, we concentrate exclusively on drivetrain components, ensuring exceptional fit and durability. When purchasing parts for your KIA Ceed SW from us, you benefit from a wide, technically focused catalogue tailored to challenging driving environments. Our customer service team possesses deep drivetrain expertise, offering clear guidance that genuinely helps with your workshop repair or DIY project. With swift dispatch from our Swedish warehouse and dependable support, we are the dedicated choice for KIA owners seeking uncompromising quality and safety. We are committed to being your most reliable partner for automotive driveline spare parts.

Frequently Asked Questions about Drivetrain for KIA Ceed SW – Spare Parts with a Perfect Fit

How do I know if my KIA Ceed SW needs a new drive shaft?

Common signs include vibrations under acceleration or clicking noises when cornering. If the CV boot is split and grease has leaked out, there is a high risk that the drive shaft will need to be replaced.

Can I replace just the ABS ring on my KIA Ceed SW?

Yes, on many KIA Ceed SW models the ABS ring can be replaced separately if it has cracked or corroded, provided the CV joint itself is still in good condition.

Why is there a clicking noise when I turn in my KIA Ceed SW?

A clicking noise on full lock is a classic symptom of a worn outer CV joint. It is often caused by dirt entering the constant velocity joint through a torn CV boot.

Do all drive shafts fit every KIA Ceed SW model?

No, drive shafts vary depending on the engine variant and gearbox. Always select your car's make, model and engine in our vehicle selector to find the exact replacement part for your car.

What is included when I purchase an outer CV joint from you?

Our CV joint kits are supplied complete with the joint itself, a model-specific CV boot, high-quality grease, circlips and the necessary mounting clamps.

How does a broken ABS ring affect driving?

A damaged ABS ring sends incorrect signals to the car's control unit, which can trigger the ABS warning light and cause safety systems such as traction control and anti-lock brakes to stop functioning correctly.