KIA Cerato

Spare parts and drivetrain components for the KIA Cerato.

Products for KIA Cerato

47 products
25 - 47 of 47
Item no.:2117987
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 932 mm
  • ABS teeth: 44
Item no.:354666
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 60 mm
  • Outer splines: 27
  • ABS teeth: 46
Item no.:699249
  • Position: Rear
Item no.:0695141
  • Outer diameter: 22 mm
  • Diameter: 78 mm
Item no.:0986512
  • Diameter: 32 mm
Item no.:0623439
  • Total length: 96 mm
Item no.:141164
  • Position: Front left, Inner
  • Inner splines: 22
  • Seal diameter: 35 mm
  • Joint diameter: 76 mm
  • Outer splines: 26
Item no.:0617304
  • Total length: 95 mm
Item no.:148268
  • Position: Front left, Inner
  • Inner splines: 22
  • Seal diameter: 35 mm
  • Joint diameter: 76 mm
  • Outer splines: 24
Item no.:240805
  • Position: Front right, Inner
  • Inner splines: 22
  • Seal diameter: 43 mm
  • Joint diameter: 76 mm
  • Outer splines: 28
Item no.:0616821
  • Total length: 95 mm
Item no.:210700
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 371 mm
Item no.:149190
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 155,5 mm
  • Joint diameter: 82 mm
Item no.:342955
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:446304
  • Position: Inner
  • Inner splines: 24
  • Seal diameter: 41 mm
  • Total length: 165 mm
  • Joint diameter: 85 mm
Item no.:359544
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 60 mm
  • Outer splines: 27
  • ABS teeth: 44
Item no.:0646004
  • Outer diameter: 22 mm
  • Diameter: 78 mm
Item no.:148043
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 155,5 mm
  • Joint diameter: 82 mm
Item no.:341887
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:445275
  • Position: Inner
  • Inner splines: 24
  • Seal diameter: 41 mm
  • Total length: 165 mm
  • Joint diameter: 85 mm
Item no.:355562
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 60 mm
  • Outer splines: 27
  • ABS teeth: 44
Item no.:442460
  • Position: Inner
  • Inner splines: 24
  • Seal diameter: 41 mm
  • Total length: 165 mm
  • Joint diameter: 85 mm
Item no.:350023
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 60 mm
  • Outer splines: 27
  • ABS teeth: 44
Showing 25–47 of 47 products

Drivetrain for KIA Cerato

The KIA Cerato is a reliable car that requires properly functioning transmission components to maintain its dependability and performance. The drivetrain is the complex system that transfers engine power to the wheels, and on a model such as the Cerato, this system is exposed to constant stress during daily driving. Here at CVJoint24, you will find a dedicated range of parts tailored specifically for this exact model. With our catalogue, we cover the most vital requirements for your car's drivetrain, from shafts to sensor rings.

Choosing the correct spare parts not only safeguards your vehicle's service life, but also guarantees a quiet, vibration-free ride. We focus on supplying components that meet or exceed original equipment specifications, giving you complete peace of mind over every kilometre. As specialists, we understand the specific demands of the KIA Cerato and have carefully curated a range that delivers optimum compatibility and long-term durability.

How the drivetrain is engineered on the KIA Cerato

The KIA Cerato uses primarily a front-wheel-drive configuration, in which power is delivered from the gearbox via the drive shafts to the front wheels. The system relies on several interacting components, with the CV joints playing a pivotal role by allowing the wheels to move up and down with the suspension and steer while transferring power seamlessly. The inner joint sits closest to the gearbox and primarily manages vertical suspension travel, whilst the outer joint at the wheel hub accommodates steering angles and articulation.

Between these joints runs the drive shaft bar itself, which acts as the solid mechanical link. Furthermore, the wheel hubs on the KIA Cerato are often fitted with ABS rings that send essential speed signals to the car's braking and stability control systems. Understanding this layout is fundamental when diagnosing problems, as different components produce distinct symptoms when worn or damaged. A well-greased, undamaged CV boot is equally vital to seal and protect these precision components from moisture and road grit.

Common faults and symptoms

Several clear warning signs indicate that the drivetrain on your KIA Cerato is becoming worn and requires attention. One of the most typical symptoms is a clicking or knocking sound that becomes noticeable on full steering lock under acceleration; this almost always points to a worn outer CV joint. If you experience shuddering or vibrations throughout the car under acceleration instead, the inner constant velocity joint or the drive shaft itself may have become unbalanced or damaged.

Another common issue is the ABS warning light illuminating on the dashboard, which is often caused by a cracked or heavily corroded ABS ring failing to supply a clean signal to the sensor. It is crucial to respond quickly to these signs. A split CV boot that leaks grease can rapidly cause total joint failure as road dirt and moisture penetrate the mechanism. By diagnosing faults early, you can often carry out smaller, preventative repairs before they develop into costly mechanical breakdowns.

Common replacement parts for the KIA Cerato

For the KIA Cerato, we have identified several key components that regularly require inspection or renewal during the vehicle's lifespan. Our range is structured to meet these requirements with precision. Here are the most frequently requested categories for your car:

  • Drive shafts for KIA Cerato – We offer several complete shaft options for a straightforward and safe replacement.
  • Outer CV joints for KIA Cerato – Multiple variants are available to resolve knocking noises when cornering.
  • ABS rings for KIA Cerato – We stock 4 different types of reluctor rings to restore your braking system's operation.

These components are critical to your car's overall roadworthiness and driving safety. A complete driveshaft is often the most cost-effective solution for major repairs, as you replace both the inner and outer joints alongside the shaft bar in a single step. The ABS ring is a smaller yet vital part that is frequently overlooked until the warning light comes on. By keeping on top of these specific components, you can proactively maintain your KIA Cerato and prevent unexpected roadside breakdowns.

How to find the right part for your KIA Cerato

Proceed to the appropriate product section for the KIA Cerato:

On a vehicle with several possible drivetrain issues, it is wise to start in the correct category straight away. By reviewing the exact product areas for the KIA Cerato, it is easier to distinguish between drive shaft, CV joint or propeller shaft issues, allowing you to navigate directly to the section that best matches your symptoms and fitment.

Selecting the right spare part for your KIA Cerato can occasionally be challenging, as technical variations exist depending on engine type, gearbox option and the exact model year. The most reliable method to source the correct component is to filter by your car's make, model and engine variant. By selecting your exact vehicle details, our shop displays only the parts that are fully compatible with your specific car.

Nevertheless, it is always recommended to verify certain technical measurements, such as the tooth count on the ABS ring or the spline count on the CV joint shaft, since subtle revisions can occur across production runs. At CVJoint24, we aim to provide comprehensive technical data to prevent ordering errors. Should you require any assistance, our specialist team is always on hand to guide you through our complete All car makes selection, ensuring you receive the correct part first time.

Why shop with CVJoint24

As a Swedish driveline specialist shipping across the EU, CVJoint24 combines deep technical expertise with a comprehensive catalogue. We focus exclusively on vehicle power transmission, allowing us to provide specialist knowledge that general motor factors often lack. When you buy from us, you receive high-quality parts with guaranteed fitment, designed to endure demanding European road conditions where road salt, grit and moisture test components to their limits.

We recognise the importance of getting your car back on the road promptly, which is why we maintain efficient logistics solutions and provide clear product data. By choosing a specialist, you give your KIA Cerato the finest components for many thousands of trouble-free kilometres ahead. Our goal is to be the obvious choice for motorists who demand quality, precision fit and absolute confidence in their drivetrain. With our support, maintaining your KIA Cerato is simpler, faster and safer.

Frequently Asked Questions about KIA Cerato Drivetrain & Spare Parts

How do I know if my KIA Cerato needs a new drive shaft?

Common signs include severe vibrations under acceleration or a thumping noise from underneath the car. If the vibrations stop when you lift off the accelerator, it often points to internal wear inside the drive shaft.

Do all outer CV joints fit all KIA Cerato models?

No, they can differ depending on engine size and whether the car has a manual or automatic gearbox. Always select your car's make, model and engine to find the correct part for your specific vehicle.

Why is the ABS warning light on in my KIA Cerato?

This is often caused by a cracked or corroded ABS ring. On the KIA Cerato, these are exposed to the elements, which can cause them to crack and send incorrect signals to the sensor.

Can I replace just the CV boot if it is split on my Cerato?

Yes, provided you catch the damage early before dirt and water have managed to ruin the joint itself. If you can already hear knocking noises, replacing the complete CV joint is usually necessary.

How many splines does a CV joint for the KIA Cerato have?

The spline count varies between model years and engines. It is therefore essential to count the teeth on the old part or check the technical specifications in our product description.

Is it difficult to replace a drive shaft on a KIA Cerato yourself?

It requires a range of tools and some mechanical experience, as you need to dismantle suspension and brake components. However, for a confident DIY mechanic, it is a fully achievable project.