KIA Magentis

Spare parts and drivetrain components for KIA Magentis.

Products for KIA Magentis

46 products
25 - 46 of 46
Item no.:0583292
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 62 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:337914
Item no.:114456
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 661 mm
  • ABS teeth: 47
Item no.:215032
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 979 mm
Item no.:2196722
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 979 mm
  • ABS teeth: 47
Item no.:117250
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 663 mm
Item no.:1120328
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 663 mm
  • ABS teeth: 47
Item no.:0488868
  • Position: Inner
  • Inner splines: 25
  • Seal diameter: 41 mm
  • Total length: 155,3 mm
  • Joint diameter: 87 mm
Item no.:141535
  • Position: Front left, Inner
  • Inner splines: 26
  • Splines gearbox side: 27
  • Seal diameter: 41 mm
  • Outer diameter: 89 mm
Item no.:242942
  • Position: Front right, Inner
  • Inner splines: 25
  • Splines gearbox side: 28
  • Seal diameter: 42 mm
  • Outer diameter: 89 mm
Item no.:7315874
  • Position: Front, Outer
  • Inner splines: 25
  • Seal diameter: 60 mm
  • Outer splines: 27
  • Thread size: M22X1,5
Item no.:0620283
  • Total length: 102 mm
Item no.:241519
  • Position: Front right, Inner
  • Inner splines: 26
  • Splines gearbox side: 26
  • Seal diameter: 42 mm
  • Outer diameter: 91 mm
Item no.:352753
  • Position: Front, Outer
  • Inner splines: 26
  • Splines wheel side: 27
  • Seal diameter: 60 mm
  • ABS teeth: 47
Item no.:349344
  • Position: Front, Inner
  • Inner splines: 23
  • Seal diameter: 41 mm
  • Total length: 156 mm
  • Joint diameter: 81 mm
Item no.:0610042
  • Total length: 101 mm
Item no.:0621449
  • Total length: 104 mm
Item no.:3597014
  • Position: Front, Outer
  • Inner splines: 25
  • Seal diameter: 62 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:143951
  • Position: Front left, Inner
  • Inner splines: 25
  • Splines gearbox side: 27
  • Seal diameter: 41 mm
  • Outer diameter: 88 mm
Item no.:293479
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 386 mm
Item no.:143205
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 27
  • Seal diameter: 41 mm
  • Outer diameter: 91 mm
Showing 25–46 of 46 products

Drivetrain for KIA Magentis

The KIA Magentis demands precision when choosing replacement parts for its driveline. As a Swedish driveline specialist, we understand the specific requirements of this saloon, whether you drive a first- or second-generation car. The drivetrain is vital to how your vehicle handles, and selecting the correct components is essential to maintain the smooth ride and stability expected of a properly functioning KIA. We stock a comprehensive selection of critical car parts designed to keep your vehicle running safely and efficiently over many thousands of kilometres. By insisting on high quality and an exact fit, we help you avoid unnecessary trips to the garage and ensure engine power reaches the road without losses or unwanted noises.

How the drivetrain works on the KIA Magentis

The drivetrain layout on the KIA Magentis features a standard front-wheel-drive configuration, transferring engine torque to the front wheels via the gearbox. Power is delivered through two drive shafts, one on each side, equipped with inner and outer CV joints. The inner constant velocity joints connect to the gearbox to absorb angular changes over bumps, whilst the outer joints sit at the wheel hub, allowing the front wheels to steer while still receiving power. Each joint is sealed inside a durable CV boot packed with specialist grease to prevent wear and contamination. In addition, ABS reluctor rings are fitted to supply wheel-speed data to the vehicle's electronic safety systems, playing an integral role in both braking and stability control.

Common faults and symptoms

Several clear warning signs indicate that parts in your KIA Magentis drivetrain are worn and due for replacement. The most typical symptom is a rhythmic clicking or knocking noise when turning sharply at low speeds, which almost always points to a worn outer CV joint. If you notice severe vibrations through the steering wheel or bodywork during acceleration, this often indicates an unbalanced or worn driveshaft. Furthermore, a cracked or corroded ABS ring can trigger abnormal brake pedal pulsation during ordinary stops or illuminate the ABS warning light on the dashboard, directly compromising your safety.

Common parts to replace on the KIA Magentis

We have pinpointed the most frequently required driveline spare parts to keep your KIA Magentis in prime mechanical condition. Our range covers the vital components for this model. Key parts you should regularly inspect and replace as needed include:

  • Drive shafts for KIA Magentis – complete shaft assemblies for straightforward replacement.
  • Outer CV joints for KIA Magentis – often supplied with a boot kit and fittings.
  • ABS rings for KIA Magentis – ensuring accurate data for the anti-lock braking system.

Every component is manufactured to strict tolerances for a precision fit, reducing the risk of fitting issues and simplifying installation for both garages and DIY mechanics.

Finding the right part for your KIA Magentis

Navigate directly to the appropriate category for your KIA Magentis:

When diagnosing driveline issues, choosing the right category straight away saves time. Reviewing the available sections for the KIA Magentis makes it easy to distinguish between drive shaft, CV joint, or prop shaft faults, leading you directly to the parts that match your symptoms and vehicle.

Selecting the exact part for your KIA Magentis is straightforward when you filter by vehicle details. Use our selector to specify your make, model and engine variant, and we will present parts confirmed to fit your car. We also recommend checking key physical dimensions, such as total shaft length or the tooth count on an ABS ring or CV joint, as specifications can vary across model years and equipment levels. Our knowledgeable support team is always on hand if you require technical guidance before ordering.

Why choose CVJoint24

Choosing CVJoint24 means relying on a specialist with comprehensive technical expertise in driveline systems for Korean cars. Rather than offering generic accessories, we focus strictly on high-grade driveline solutions for your vehicle. Thanks to our commitment to OE-level quality and accurate fitment, you can be confident that the parts you order for your KIA Magentis meet or exceed original equipment standards. With our warehouse in Helsingborg, Sweden, and fast delivery across the EU, we give you the technical confidence you need for every repair.

Frequently Asked Questions about KIA Magentis Drivetrain & Spare Parts

How do I know if my KIA Magentis needs a new drive shaft?

Common symptoms include vibrations under acceleration or a clicking noise when cornering. If the boot is split and grease has leaked out, there is a high risk that the shaft or CV joint has been damaged.

Can I easily find parts that fit my car?

Yes, selecting your car's make, model and engine variant in our search is the most reliable way to find parts with a guaranteed fit for your KIA Magentis.

What is the difference between an inner and outer CV joint?

The outer CV joint sits at the wheel and accommodates steering angles, whilst the inner joint sits at the gearbox and accommodates suspension movement.

Why is the ABS ring important for my KIA Magentis?

The ABS ring provides wheel speed signals to the car's braking system. If it is cracked, the ABS system may trigger a warning light or malfunction, which affects driving safety.

Do you sell complete drive shafts for KIA Magentis?

Yes, we currently stock 4 different complete drive shaft options ready for direct installation.

How often should I inspect the CV boots?

It is advisable to inspect the boots at every service or tyre change. An intact CV boot significantly extends the service life of your constant velocity joint.