KIA RIO III

Welcome to your drivetrain specialist for the KIA RIO III. Here you will find a carefully curated range of premium components engineered to keep your car's power delivery working...

Products for KIA RIO III

40 products
25 - 40 of 40
Item no.:511316
  • Position: Rear right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 932 mm
Item no.:1161094
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 652 mm
  • ABS teeth: 48
Item no.:0624217
  • Total length: 98 mm
Item no.:0653232
  • Total length: 96 mm
Item no.:140807
  • Position: Front left, Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 149 mm
  • Joint diameter: 149 mm
Item no.:0683522
  • Total length: 117 mm
Item no.:341448
  • Position: Front, Inner
  • Inner splines: 22
  • Seal diameter: 30 mm
  • Total length: 145 mm
  • Joint diameter: 79 mm
Item no.:0623603
  • Outer diameter: 22 mm
  • Diameter: 78 mm
Item no.:0676351
  • Outer diameter: 22 mm
  • Diameter: 76 mm
  • Height: 120 mm
Item no.:351092
  • Position: Outer
  • Inner splines: 20
  • Seal diameter: 52,6 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:114774
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 656 mm
  • Joint diameter: 73 mm
  • ABS teeth: 48
Item no.:0661295
  • Outer diameter: 22 mm
  • Diameter: 76 mm
  • Height: 120 mm
Item no.:354808
  • Position: Outer
  • Inner splines: 20
  • Seal diameter: 52,6 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:113285
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 656 mm
  • Joint diameter: 73 mm
  • ABS teeth: 48
Item no.:0684386
  • Outer diameter: 22 mm
  • Diameter: 76 mm
  • Height: 120 mm
Item no.:114358
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 656 mm
  • Joint diameter: 73 mm
  • ABS teeth: 48
Showing 25–40 of 40 products

Drivetrain parts for KIA RIO III

The KIA RIO III is a popular small car renowned for its reliability and economical running costs, but like all vehicles, its drivetrain requires regular maintenance to preserve performance and safety. The drivetrain is the critical link transferring engine power to the road wheels, and for the KIA RIO III, this means a system optimised for front-wheel drive. At CVJoint24, you will find a broad selection of components tailored specifically to this model. With an extensive range, we cover virtually every need, from complete drive shafts to smaller yet essential CV boots. Understanding your car's drivetrain is the first step towards successful maintenance, and we are here to help guide you to the right car parts. We keep your vehicle safe on the road by supplying parts that meet or exceed original equipment specifications, which is vital for a supermini where every component plays a major part in the overall driving experience.

How the drivetrain works on the KIA RIO III

The drivetrain layout on the KIA RIO III uses a classic setup for front-wheel-drive cars with a transverse engine. Power travels from the engine through the gearbox and is distributed to the front wheels via two drive shafts. Each drive shaft features two joints: an inner CV joint that links to the gearbox and an outer CV joint located at the wheel hub. The outer constant velocity joint is particularly sophisticated, as it must accommodate suspension travel and sharp steering angles while transferring power seamlessly. The entire assembly is shielded by rubber boots that keep the vital lubricating grease inside while locking out road dirt, water and salt. This compact and efficient design is key to the car's agile handling and fuel economy, but it also demands high-grade components capable of withstanding the mechanical stress of daily city driving and motorway journeys.

Common faults and symptoms

There are several clear warning signs that the drivetrain in your KIA RIO III is beginning to wear or has suffered damage. One of the most typical symptoms is a rhythmic clicking or knocking noise clearly audible on full steering lock during acceleration; this almost always indicates a failing outer CV joint. If you experience vibrations through the steering wheel or chassis instead, especially under load or during acceleration, it often points to an unbalanced drive shaft or wear inside an inner joint. It is also crucial to inspect the car's CV boots regularly. If a boot splits, the grease quickly escapes and grit enters the sensitive bearing surfaces, destroying the joint in short order through friction and overheating. Ignoring these early signs can lead to much costlier repairs or, in the worst-case scenario, a completely snapped drive shaft.

Common parts to replace on the KIA RIO III

On the KIA RIO III, certain components are more prone to wear than others due to their location and workload. In our catalogue, we have structured the components to help you quickly identify the right solution for your repair. We currently supply several drive shaft variants covering the different engine options and gearbox types across this model generation. We also stock dedicated outer CV joints and complete CV boot kits to cover every requirement. Here are the main categories to check for your car:

  • Drive shafts for KIA RIO III – complete assemblies for a fast and reliable replacement.
  • Outer CV joints for KIA RIO III – when wear is confined to the wheel-side joint.
  • CV boots for KIA RIO III – the most cost-effective way to prevent major component failure.

By heading straight to the correct category, you can troubleshoot and carry out repairs more effectively, saving both time and money in the long run.

How to find the right part for your KIA RIO III

Browse directly to the relevant section for your KIA RIO III:

When diagnosing drivetrain faults, starting in the right category saves time. By comparing the dedicated product groups for the KIA RIO III, it is straightforward to pinpoint whether the issue lies in a drive shaft, CV joint or propeller shaft, and proceed to the page that matches your car's symptoms and specifications.

Finding the exact part for your KIA RIO III can occasionally be tricky, as technical specifications vary depending on the model year, engine size and whether the car has a manual or automatic gearbox. The most reliable way to begin is by selecting your car's exact make, model and engine variant in our vehicle selector. This instantly filters out non-compatible parts and highlights components engineered for your specific setup. However, it is always wise to double-check technical specifications such as spline counts on the shaft and joint, as well as the total component length when buying a complete driveshaft, as variations can occur within the same model year. At CVJoint24, we continuously update our catalogue data so you can order with full confidence. Should you have any doubts, our technical team is ready to help you navigate our comprehensive range for KIA.

Why shop with CVJoint24

When you choose CVJoint24 for your KIA RIO III spare parts, you are buying from a Swedish driveline specialist shipping across the EU. We understand the importance of receiving the correct component swiftly to keep your car on the road, dispatching directly from our warehouse in Helsingborg, Sweden. Our business is built on deep technical knowledge and a specialised inventory that general motor factors rarely match. Thanks to our fitment guarantee, you can be confident that the parts you order will fit accurately and install without hassle. We aim to help you get the right component first time, delivered straight to your home or your chosen garage. By dedicating our focus purely to power transmission and drivetrain systems, we offer an expert knowledge base that supports you with every purchase. Make us your trusted partner for a reliable, smooth-running KIA for many thousands of kilometres to come.

Frequently Asked Questions about KIA RIO III

How do I know if my KIA RIO III needs a new drive shaft?

The most common signs are strong vibrations under acceleration or a persistent clicking noise when turning. If the vibrations remain despite balanced tyres, the drive shaft is a likely cause.

Can I replace just the CV boot on my KIA RIO III?

Yes, if you catch the damage to the boot early before dirt has entered the joint, you can replace just the CV boot. We have 4 different boot kits to fit the KIA RIO III.

What is the difference between an inner and outer CV joint?

The outer joint sits at the wheel hub and accommodates steering angles, whilst the inner joint sits at the gearbox and primarily manages suspension movement. Worn outer CV joints click when turning, whereas worn inner joints often cause vibrations.

Do all drive shafts fit every KIA RIO III model?

No, there are 8 different variants depending on the engine (e.g. 1.25, 1.4 or diesel) and gearbox type. Always select your vehicle make, model and engine to find the correct version.

How quickly are the parts delivered for my KIA?

We offer fast delivery across the EU for most of our drivetrain parts, keeping the time your KIA RIO III spends off the road or in the garage to a minimum.

What does the fitment guarantee at CVJoint24 mean?

It means we guarantee that the part will fit your KIA RIO III if you have selected your exact vehicle make, model and engine and followed our recommendations, giving you complete peace of mind with your purchase.