KIA RIO

Spare parts and drivetrain components for the KIA RIO.

Products for KIA RIO

84 products
49 - 72 of 84
Item no.:0604006
Item no.:215505
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 907 mm
  • ABS teeth: 48
Item no.:3578814
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Outer diameter: 78 mm
  • ABS teeth: 48
Item no.:0588075
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Outer diameter: 77 mm
  • ABS teeth: 48
Item no.:110292
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 683 mm
  • ABS teeth: 48
Item no.:113498
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 25
  • Total length: 634 mm
Item no.:212922
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 25
  • Total length: 923 mm
Item no.:510378
  • Position: Rear right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 932 mm
Item no.:2195009
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 25
  • Total length: 923 mm
  • ABS teeth: 48
Item no.:1183929
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 25
  • Total length: 634 mm
  • ABS teeth: 48
Item no.:349760
  • Position: Front, Inner
  • Inner splines: 22
  • Seal diameter: 30 mm
  • Total length: 145 mm
  • Joint diameter: 79 mm
Item no.:356991
  • Position: Front, Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Seal diameter: 52,5 mm
  • Thread size: M22X1,5
Item no.:358865
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 52,5 mm
  • Outer splines: 25
  • Thread size: M22X1,5
Item no.:0909878
  • Diameter: 32 mm
Item no.:144728
  • Position: Front left, Inner
  • Inner splines: 22
  • Splines gearbox side: 26
  • Seal diameter: 35 mm
  • Outer diameter: 76 mm
Item no.:0683541
  • Total length: 86 mm
Item no.:347352
  • Position: Front, Inner
  • Inner splines: 30
  • Splines gearbox side: 25
  • Seal diameter: 41 mm
  • Outer diameter: 74 mm
Item no.:355984
  • Position: Front, Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Seal diameter: 55,2 mm
  • Outer diameter: 78 mm
Item no.:156598
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Total length: 149 mm
  • ABS teeth: 48
Item no.:332876
  • ABS teeth: 48
  • Inner diameter: 62 mm
  • Outer diameter: 76 mm
  • Width: 8 mm
Item no.:149191
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 41 mm
  • Total length: 155,5 mm
  • Joint diameter: 82 mm
Item no.:2188142
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 927 mm
  • ABS teeth: 48
Item no.:1158530
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 634 mm
  • ABS teeth: 48
Item no.:114643
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 675 mm
Showing 49–72 of 84 products

Drivetrain for KIA RIO

Maintaining the drivetrain on your KIA RIO is vital for both vehicle performance and road safety. As a Swedish driveline specialist in drivetrain parts, we offer components that match or exceed original equipment specifications. The KIA RIO is renowned for its reliability, but like any front-wheel-drive car, its transmission of power undergoes substantial stress during daily driving. By selecting the correct spare parts, you ensure that engine power reaches the wheels without energy loss or unwanted noises.

Our range for the KIA RIO is carefully curated to cover various generations of the model. We focus on parts that frequently require replacement due to natural wear, such as drive shafts and CV joints. Investing in quality components reduces the risk of consequential damage to the gearbox and suspension, saving both time and money in the long run. We combine technical expertise with comprehensive stock to deliver the best possible solution for your car.

How the drivetrain works on the KIA RIO

The KIA RIO uses a classic front-wheel-drive configuration with a transverse engine. Power is transmitted from the gearbox to the front wheels via two drive shafts. Each shaft features two joints: an inner CV joint located closest to the gearbox and an outer CV joint at the wheel hub. The outer joint is particularly intricate, as it must transfer power smoothly while the wheel steers and moves vertically with the suspension. This places exceptionally high demands on material quality and lubrication.

The drive shafts on the KIA RIO are designed to be lightweight yet torsionally stiff. Flexible rubber CV boots sit between the joints to retain lubricating grease and seal out dirt and moisture. If a boot splits, road grit quickly contaminates the precision-machined bearing surfaces, leading to rapid failure. In addition, many models feature an ABS ring mounted on the outer joint, serving as an integral part of the vehicle's braking and active safety systems.

Common faults and symptoms

The most frequent sign of a worn outer CV joint on a KIA RIO is a rhythmic clicking or knocking noise when cornering under load, such as during parking manoeuvres or turning at junctions. If the sound disappears when driving straight ahead, the outer constant velocity joint is almost certainly at fault. Conversely, vibrations felt through the steering wheel or bodywork under acceleration often point to a worn inner CV joint or an unbalanced, distorted driveshaft.

Another common issue on the KIA RIO is a cracked ABS ring caused by rust building up underneath it. This typically triggers the ABS warning light or causes unwanted ABS intervention at low speeds. By staying alert to these symptoms, you can rectify faults before they result in a breakdown. Regularly inspecting the CV boots remains the single best way to prevent costly repairs.

Common parts to replace on the KIA RIO

Depending on mileage and driving conditions, certain components are ordered particularly often for the KIA RIO. We keep our stock aligned with demand for these critical items. Here are the most relevant categories for your car:

  • Drive shafts for KIA RIO: We supply multiple complete drive shaft assemblies for quick, hassle-free replacement.
  • Outer CV joints for KIA RIO: Dedicated parts covering most engine variants and model years.
  • ABS rings for KIA RIO: We stock 4 different types of ABS rings to resolve sensor signal faults.

Fitting a complete drive shaft is frequently more time-efficient than overhauling an old shaft with new joints, especially on higher-mileage vehicles. It also guarantees that all elements, including factory balancing and boots, are brand new from the start.

Finding the right part for your KIA RIO

Navigate directly to the relevant category for your KIA RIO:

With several possible driveline issues, selecting the correct category from the start is essential. Comparing specific sections for the KIA RIO helps you distinguish between drive shaft, CV joint or prop shaft problems, leading you directly to the parts that match your vehicle's symptoms and fitment.

Pinpointing the exact component for a KIA RIO can sometimes be challenging, as specifications vary across engine sizes, gearbox types and production years. The most reliable approach is to select your car's make, model and engine variant in our store. This filters the selection down to parts technically compatible with your vehicle. Even so, we always recommend verifying key technical details, such as the spline count on both the inner and outer ends of the joint.

In some production runs, KIA used different component suppliers within the same model year, making precise measurements vital. When replacing only an ABS ring, be sure to confirm its diameter and tooth count. Our customer support team and product pages provide the measurements you need to compare against your original part before fitting. Careful checking ensures a correct fit first time and gets your car back on the road without delay.

Why buy from CVJoint24?

CVJoint24 is not just an ordinary car parts retailer; we are a dedicated specialist focusing on depth rather than broad general ranges. By concentrating on drivetrain components, we offer a level of technical knowledge and catalogue depth that general motor factors rarely match. For your KIA RIO, this means guaranteed fitment and durable parts engineered to withstand demanding European road conditions, where road salt and moisture test component longevity.

We combine modern online ordering with the technical advice needed to guide you to the right spare parts. With prompt dispatches across the EU from our Swedish warehouse in Helsingborg, we strive to be the clear first choice for every KIA driver needing driveline components. Buying from us gives you confidence in receiving high-grade parts at competitive prices, backed by dedicated driveline specialists.

Frequently Asked Questions about Drivetrain for KIA RIO - Power Transmission Spare Parts

How do I know if it is the outer or inner CV joint that is faulty on my KIA RIO?

A damaged outer CV joint typically emits a clicking or popping noise when turning. A faulty inner CV joint tends to cause vibrations through the vehicle chassis during acceleration, whether you are steering or driving straight ahead.

Can I replace just the ABS ring on my KIA RIO, or do I have to replace the entire CV joint?

On many KIA RIO models, you can easily replace just the ABS ring if it has cracked. We supply standalone ABS rings to make repairs more cost-effective, provided the CV joint itself is otherwise in sound mechanical condition.

Does the same drive shaft fit both manual and automatic KIA RIO models?

No, drive shafts usually differ between manual and automatic gearboxes, primarily in length and the fitment into the transmission. Always select your car's make, model and engine on cvjoint24.com to find the correct version.

Why is it important to check the spline count on the CV joint?

Even if a part is listed for your vehicle, variations in the drive shaft and wheel hub splines can occur. By counting the teeth on your old part and comparing them to our specifications, you ensure a 100% accurate fit.

How often should I inspect the CV boots on my KIA RIO?

We recommend inspecting the CV boots at every oil service or seasonal tyre change. Even a small tear can quickly allow grease to escape and road dirt to enter, ruining the constant velocity joint in very little time.

Do you supply complete drive shafts for KIA RIO?

Yes, we stock a wide selection of complete drive shafts for the KIA RIO. Replacing the entire shaft is often simpler and safer than fitting individual joints, as you receive factory-fitted boots and pre-greased joints ready to install.