Land Rover LR2

Welcome to your specialist for Land Rover LR2 drivetrain components. Proper maintenance of your power transmission is vital for ride comfort, durability and safety. We offer a carefully...

Products for Land Rover LR2

6 products
1 - 6 of 6
Item no.:0653300
  • Outer diameter: 19 mm
  • Diameter: 68 mm
Item no.:318039
  • Total length: 22 mm
  • ABS teeth: 22
Item no.:649027
  • Position: Rear, Inner
  • Inner splines: 29
  • Splines gearbox side: 26
  • Seal diameter: 35 mm
  • Outer diameter: 71 mm
Item no.:620653
  • Total length: 64 mm
  • Diameter: 24 mm
Item no.:0810420
  • Inner diameter: 30 mm
  • Bearing thickness: 15 mm
  • Hole spacing c/c: 82 mm

Drivetrain for Land Rover LR2

The Land Rover LR2 is celebrated for its versatility and its ability to handle both city traffic and demanding off-road terrain. To preserve this performance, a drivetrain in absolute top condition is essential. The transmission of power is at the very core of your vehicle's motion, and every component—from the smallest boot to the robust propeller shaft—plays a crucial part in the overall driving experience. At CVJoint24, you will find a dedicated range tailored specifically for the Land Rover LR2. We understand the technical demands of four-wheel drive systems and the strain that European driving conditions place on mechanical components.

Choosing the correct spare parts protects not only your car's operational reliability, but also its resale value. Our priority is supplying parts with an accurate fit, reducing the risk of premature wear on adjoining assemblies. Whether you are carrying out preventative maintenance or tackling an urgent repair, we are your partner for all things drivetrain. We combine technical expertise with a comprehensive inventory to ensure your Land Rover receives the very best care on the road.

How the Land Rover LR2 drivetrain is configured

The Land Rover LR2 employs a sophisticated power transmission layout engineered to deliver dependable traction in all conditions. The system is based on a transverse engine that feeds torque through a gearbox into an angle drive, commonly known as the Power Transfer Unit (PTU). From here, drive is routed rearwards via a Land Rover LR2 propeller shaft to the rear differential. This prop shaft is typically divided into sections and supported by one or more centre bearings to minimise vibrations and imbalance during operation.

At the wheels, drive shafts transfer this power directly to the road surface. The Land Rover LR2 inner CV joint is particularly critical, as it accommodates suspension travel while sustaining uninterrupted torque from the gearbox. The entire assembly is a precise mechanical balancing act, where every part must work in complete harmony to prevent unwanted noises and drivetrain drag. Understanding this setup is key to pinpointing where any fault originates.

Common faults and symptoms

Drivetrain problems on a Land Rover LR2 can manifest in several ways, though certain warning signs are especially prevalent. One of the clearest indications of trouble is vibration felt through the car's body, particularly at speeds between 60 and 90 km/h. This is frequently caused by an unbalanced prop shaft or a worn Land Rover LR2 centre bearing. A clicking sound on full lock usually points to a failing outer constant velocity joint, whereas shuddering or vibrations under hard acceleration typically suggest a worn inner CV joint.

Another vital inspection point is the rubber boots. When a Land Rover LR2 CV boot splits, lubricating grease escapes and road dirt penetrates the joint, rapidly destroying the polished bearing surfaces. Overlooking these early signs can cause severe consequential damage to both the gearbox and differentials. Staying alert to changes in vehicle behaviour allows you to address faults before they result in a complete breakdown at the roadside.

Common replacement parts for the Land Rover LR2

Within our range for the Land Rover LR2, we stock the critical components most frequently replaced over the vehicle's lifespan. Our inventory features several dedicated items for this model, including a Land Rover LR2 drive shaft engineered to meet or exceed original equipment standards. As the prop shaft undergoes heavy loads, we supply two distinct variants alongside two centre bearing configurations to suit different technical specifications and model years.

Replacing a centre bearing before it fails completely is one of the most cost-effective ways to extend propeller shaft life and avoid intrusive cabin vibrations. In addition, we supply inner CV joints and protective CV boots, both vital for keeping the drivetrain fully sealed and lubricated. By focusing on these core driveline categories, we provide deep technical expertise and high availability for your car, sparing you from generic car parts that may not meet Land Rover requirements.

How to find the right part for your Land Rover LR2

Select the relevant category for your Land Rover LR2:

On vehicles with intricate all-wheel-drive systems, starting in the correct category saves valuable time. By comparing the exact component areas for the Land Rover LR2, it is easy to distinguish between drive shaft, CV joint or propeller shaft issues and navigate straight to the right parts matching your symptoms and specifications.

By following these links or selecting your car's make, model and engine, you can ensure your repair is carried out correctly first time. We supply detailed technical specifications for each item, giving you full confidence before placing your order.

Why shop with CVJoint24

CVJoint24 is the dedicated international shop of a Swedish driveline specialist, with central warehousing in Helsingborg, Sweden, focusing squarely on drivetrain and power transmission assemblies. When you order parts for your Land Rover LR2 from us, you benefit directly from our specialised mechanical knowledge and rigorous quality standards. We back our products with a dependable fitment guarantee, ensuring that the parts recommended for your selected vehicle specification fit properly every time.

With efficient dispatch across the EU, we help minimise your vehicle's downtime in the workshop or garage. We combine the reliability of a modern distribution hub with the attention to detail of a true driveline specialist. Choose CVJoint24 for your Land Rover LR2 and ensure your power is delivered smoothly to the road with the right components and technical support.

Frequently Asked Questions about Drivetrain Parts for Land Rover LR2

How do I know if my Land Rover LR2 propeller shaft needs replacing?

The most common signs are vibrations throughout the vehicle during acceleration or at specific speed ranges, alongside unusual noises from underneath the car that can indicate imbalance or worn universal joints.

Can I replace just the centre bearing on my Land Rover LR2?

Yes, we supply individual centre bearings, which is often a far more economical solution than replacing the complete propeller shaft if the shaft itself remains undamaged and balanced.

Why is it important to replace a damaged CV boot immediately?

A split CV boot allows the lubricating grease to escape while letting in dirt and moisture. This rapidly causes the CV joint to wear out from friction, resulting in a costly full replacement.

How does your fitment guarantee work for the Land Rover LR2?

When you select your car's make, model and engine variant, we guarantee that the part will fit your specific vehicle. If it unexpectedly does not, our team will help you find the correct part at no extra charge.

Which parts make up the drivetrain on a Land Rover LR2?

The drivetrain includes drive shafts, inner and outer CV joints, propeller shaft, centre bearing and CV boots that protect moving components and ensure efficient power transfer to the wheels.

How quickly do you deliver parts for the Land Rover LR2?

We dispatch in-stock items quickly from our central warehouse across Europe, ensuring you receive your parts promptly to get your car back on the road without unnecessary delay.