Mazda 121

Welcome to CVJoint24, your Swedish drivetrain specialist for the Mazda 121. Maintaining your vehicle's driveline is essential for both driving safety and ride comfort. We supply a...

Products for Mazda 121

14 products
1 - 14 of 14
Item no.:0527418
  • Position: Outer
  • Inner splines: 19
  • Seal diameter: 52 mm
  • Outer splines: 24
  • ABS teeth: 44
Item no.:7315722
  • Position: Front, Outer
  • Inner splines: 19
  • Seal diameter: 52 mm
  • Outer splines: 24
  • Thread size: M20X1,5
Item no.:0514114
  • Position: Outer
  • Inner splines: 21
  • Seal diameter: 52 mm
  • Outer splines: 24
  • ABS teeth: 44
Item no.:0520509
  • Position: Outer
  • Inner splines: 21
  • Seal diameter: 52 mm
  • Outer splines: 24
  • Thread size: M20X1,5
Item no.:0365126
  • Position: Front
  • ABS teeth: 44
  • Inner diameter: 65 mm
  • Outer diameter: 78 mm
  • Width: 10 mm
Item no.:0322702
  • ABS teeth: 44
  • Inner diameter: 68 mm
  • Outer diameter: 78 mm
  • Width: 9,5 mm
Item no.:0589393
  • Position: Outer
  • Inner splines: 19
  • Seal diameter: 52 mm
  • Outer splines: 24
  • ABS teeth: 44
Item no.:1117965
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 604 mm
  • Joint diameter: 87 mm
Item no.:2127514
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 812 mm
  • Joint diameter: 81 mm
Item no.:0507297
  • Position: Outer
  • Inner splines: 20
  • Splines wheel side: 25
  • Seal diameter: 56 mm
  • Outer splines: 25
Item no.:0538476
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 52 mm
  • Outer splines: 24
  • Thread size: M22X1,5
Item no.:3590654
  • Position: Outer
  • Inner splines: 20
  • Seal diameter: 52 mm
  • Outer splines: 24
  • Thread size: M20X1,5
Item no.:3565503
  • Position: Outer
  • Inner splines: 19
  • Seal diameter: 52 mm
  • Outer splines: 24
  • ABS teeth: 44
Item no.:330523
  • ABS teeth: 44
  • Inner diameter: 78 mm
  • Outer diameter: 96 mm
  • Width: 10 mm

Drivetrain for Mazda 121

The Mazda 121 is a car model that, despite its compact dimensions, places high demands on its power transmission to deliver the agility and reliability that owners expect. The drivetrain is an intricate system of rotating components that must work in complete harmony for the vehicle to run smoothly and efficiently. As a Swedish specialist in drivetrain systems, we at CVJoint24 are dedicated to providing the very best components for your Mazda 121. Whether you drive mainly in town or cover longer distances, it is vital that every link in the chain—from the gearbox to the wheel hub—is in top condition. We understand that each model year can bring specific technical nuances, which is why we have assembled a range that reflects these variations with high precision. Choosing the right parts not only extends your car's service life, but also ensures an optimal driving experience with minimal vibration and noise.

How the drivetrain is configured on the Mazda 121

The layout of the drivetrain on a Mazda 121 follows a proven and efficient setup for front-wheel-drive cars. The system starts at the engine and gearbox, where torque is distributed between the two drive shafts. Each drive shaft for the Mazda 121 features two joints: an inner joint that connects to the gearbox and allows axial movement as the suspension articulates, and an outer joint at the wheel. The outer joint is a constant velocity joint (CV joint) that allows the wheel to steer while receiving power. For these components to function smoothly, high-quality grease and intact CV boots are required to guard against road dirt, water and salt. On many versions of the Mazda 121, an ABS ring is also mounted directly on the outer joint, making it critical not just for propulsion but also for the car's active safety systems. Understanding how these parts interact is fundamental to maintaining them correctly.

Common faults and symptoms

Identifying drivetrain issues early can save significant repair costs down the road. One of the most typical symptoms of a worn outer CV joint on a Mazda 121 is a rhythmic clicking noise when turning, particularly under load. This is frequently caused by dirt entering the joint after a boot has split, resulting in rapid wear to the balls and ball tracks. Vibrations felt throughout the car during acceleration that disappear when you ease off the throttle often point to a worn inner CV joint or a distorted driveshaft. Another frequent problem concerns the ABS system; if an ABS ring on a Mazda 121 cracks or corrodes, the sensor can no longer read wheel speed correctly. This usually triggers the ABS warning light or leads to inappropriate ABS activation during normal braking. Staying alert to these warning signs lets you resolve issues before they result in a complete breakdown on the road.

Common parts to replace on the Mazda 121

For the Mazda 121, we offer an impressively comprehensive range covering most requirements throughout the car's lifetime. Our catalogue contains carefully selected items engineered specifically for this model, including the following categories:

  • Drive shaft Mazda 121 - Ideal when both inner and outer joints are worn or the shaft bar itself is damaged.
  • Outer CV joint Mazda 121 - A wide selection to match various spline counts and dimensions.
  • ABS ring Mazda 121 - We stock the most common variants to ensure your braking system operates faultlessly.

We provide multiple options within each category because the Mazda 121 was produced with varying technical specifications depending on engine size and whether the car was factory-fitted with ABS. Our attention to detail ensures you find the exact part your car requires, whatever the variant.

How to find the right part for the Mazda 121

Navigate to the right subcategory for your Mazda 121:

When troubleshooting a car with several potential driveline issues, it is best to begin in the right category straight away. Comparing the specific component groups for the Mazda 121 makes it easier to tell whether you need a drive shaft, a CV joint or a propeller shaft, guiding you to the page that best matches your symptoms and fitment.

Finding the correct spare part for your Mazda 121 always begins with precise identification. The simplest and most dependable method is to filter by your car's make, model and engine. This narrows our range down so that only parts suitable for your specific car are displayed. However, because vehicle manufacturers sometimes introduce modifications mid-production, or previous owners may have fitted alternative components, we always advise double-checking the technical data. Verify the tooth count on the ABS ring as well as the external and internal spline counts on the CV joint. We provide clear technical drawings and dimensions for all our products so that you can cross-reference them with your existing part before ordering. This thorough approach ensures you get the right part first time, preventing ordering errors and getting your car back on the road promptly.

Why shop at CVJoint24?

When you choose CVJoint24, you choose a partner passionate about driveline components. We are not just another generic car parts retailer; we are a Swedish driveline specialist who lives and breathes drivetrain technology. Our mission is to offer unmatched technical expertise paired with an inventory depth that few can equal. Our fitment guarantee eliminates the guesswork of shopping online—we guarantee the part will fit whenever you follow our recommendations. We understand that workshop downtime is costly, so we ship directly across the EU from our warehouse in Helsingborg, Sweden. Ordering from us gives you premium-quality parts for complete peace of mind, kilometre after kilometre. We take pride in being your trusted drivetrain specialist, ensuring every customer feels confident selecting spare parts for their Mazda 121.

Frequently Asked Questions about Drivetrain Parts for Mazda 121

How do I know if my Mazda 121 has ABS?

The simplest way is to look behind the brake disc for a toothed ring (ABS ring) and a sensor. You can also check whether the ABS warning light illuminates briefly when you switch on the ignition.

Can I replace just the CV joint, or do I need to replace the entire drive shaft?

If the shaft bar is undamaged and the inner joint is in good working order, replacing just the outer CV joint is usually sufficient. In cases of extensive wear to both joints, a complete drive shaft can be more cost-effective.

Why is there a clicking noise when I turn in my Mazda 121?

A clicking noise when turning is a classic symptom of a worn outer CV joint. This is most often caused by a split CV boot allowing dirt to enter and damage the joint's internal components.

Do all drive shafts fit every Mazda 121 model?

No, specifications vary depending on the model year, engine and gearbox. Always filter by your car's make, model and engine to find the exact parts for your vehicle.

What is included when I buy an outer CV joint from you?

Our CV joint kits are supplied complete with the joint itself, a model-specific CV boot, high-grade grease, circlips and mounting clamps.

How quickly will parts for my Mazda 121 be delivered?

We dispatch all in-stock items swiftly from our Swedish central warehouse across the EU, helping you get your car back on the road as quickly as possible.