Mazda 323 S

Spare parts and drivetrain components for Mazda 323 S.

Products for Mazda 323 S

59 products
25 - 48 of 59
Item no.:335631
  • ABS teeth: 44
  • Inner diameter: 72 mm
  • Outer diameter: 90 mm
  • Width: 11,6 mm
Item no.:0545880
  • Position: Outer
  • Inner splines: 23
  • Splines wheel side: 26
  • Seal diameter: 56 mm
  • ABS teeth: 44
Item no.:0338001
  • Position: Front
  • ABS teeth: 44
  • Inner diameter: 75 mm
  • Outer diameter: 90 mm
  • Width: 13 mm
Item no.:0537282
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:0662702
  • Total length: 84 mm
Item no.:353625
  • Position: Front, Outer
  • Inner splines: 28
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:356248
  • Position: Front, Outer
  • Inner splines: 28
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Joint diameter: 78 mm
Item no.:356564
  • Position: Front, Outer
  • Inner splines: 29
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 44
Item no.:115234
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 26
  • Total length: 622 mm
  • ABS teeth: 44
Item no.:217356
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 26
  • Total length: 913 mm
  • ABS teeth: 44
Item no.:212733
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 26
  • Total length: 913 mm
Item no.:111083
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 26
  • Total length: 622 mm
  • Joint diameter: 73 mm
Item no.:1177878
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 26
  • Total length: 628 mm
  • Joint diameter: 79 mm
Item no.:2159512
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 26
  • Total length: 903 mm
  • Joint diameter: 79 mm
Item no.:1101996
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 26
  • Total length: 628 mm
  • ABS teeth: 44
Item no.:2185364
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 26
  • Total length: 903 mm
  • ABS teeth: 44
Item no.:335000
  • Position: Front
  • ABS teeth: 44
  • Inner diameter: 78 mm
  • Outer diameter: 96 mm
  • Width: 10 mm
Item no.:2159952
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 579 mm
  • ABS teeth: 44
Item no.:1148387
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 24
  • Total length: 607 mm
  • Diameter 1: 76 mm
Item no.:2147201
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 24
  • Total length: 887 mm
  • Diameter 1: 76 mm
Item no.:217574
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 26
  • Total length: 580 mm
  • Joint diameter: 76 mm
Item no.:214752
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 26
  • Total length: 580 mm
  • ABS teeth: 44
Item no.:1120833
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 26
  • Total length: 637 mm
  • Joint diameter: 79 mm
Item no.:2140611
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 26
  • Total length: 579 mm
  • Joint diameter: 79 mm
Showing 25–48 of 59 products

Drivetrain for Mazda 323 S

The Mazda 323 S has long been an appreciated saloon on European roads, renowned for its mechanical simplicity and dependability. To maintain this high level of operational reliability, it is vital to give the car’s drivetrain the attention it deserves. The drivetrain is a complex assembly of components working in unison to turn the engine’s power into smooth motion. Here at CVJoint24, you will find a dedicated range of 22 premium parts developed specifically for the Mazda 323 S. By investing in the correct spare parts, you extend the lifespan of your vehicle and ensure power transmission takes place without undue friction or noises. We understand the importance of precision engineering on Japanese models, supplying exclusively parts that meet strict quality standards.

How the drivetrain works on the Mazda 323 S

The driveline on the Mazda 323 S is engineered to be both compact and efficient. As a front-wheel-drive car, it relies on a transverse engine and a gearbox that delivers power to the front wheels via two drive shafts. Each drive shaft for the Mazda 323 S comprises an inner joint accommodating axial movement and an outer joint enabling steering angles. These joints are protected by rubber CV boots packed with dedicated grease. If a boot splits, dirt ingresses and grease leaks out, rapidly wearing down the joint. Furthermore, the system is closely integrated with braking safety via an ABS ring for the Mazda 323 S, seated on the outer constant velocity joint to relay precise wheel-speed signals to the control unit.

Common faults and symptoms

Spotting drivetrain issues early can save significant time and money. One of the most typical signs of a worn outer CV joint on the Mazda 323 S is a rhythmic clicking noise heard on sharp turns, such as when parking or negotiating tight junctions. If the clicking stops once the wheels straighten, the diagnosis is practically certain. Vibrations arising specifically under acceleration, which vanish when you ease off the throttle, frequently point to worn inner CV joints or an unbalanced driveshaft. Additionally, pay close attention to warning lights on the dashboard. An illuminated ABS warning light is often caused by an ABS ring that has cracked from corrosion, preventing the wheel-speed sensor from registering the teeth accurately and putting the system into a fault mode.

Common parts to replace on the Mazda 323 S

To cater to the needs of all Mazda 323 S models, we maintain a comprehensive inventory of the most sought-after car parts. The key categories for your vehicle include:

  • Drive shafts for Mazda 323 S
  • Outer CV joints for Mazda 323 S
  • ABS rings for Mazda 323 S
These 22 products form the core of what is required to keep your Mazda 323 S running with optimum comfort and safety. Replacing worn components promptly avoids consequential damage to the gearbox and suspension, saving substantial repair costs over time.

Finding the right part for your Mazda 323 S

Select the relevant subcategory for your Mazda 323 S:

On a vehicle where several driveline issues can present similar symptoms, starting in the correct category is essential. By comparing the exact sections for the Mazda 323 S, it becomes simpler to distinguish between problems with a drive shaft, CV joint or prop shaft, and to proceed to the page that best matches your symptoms and fitment requirements.

To ensure you order the right part for your Mazda 323 S first time, we advise selecting your vehicle by make, model and engine variant. This filters the range to parts that are technically compatible with your specific car. However, manufacturers occasionally introduced mid-cycle revisions during a production year that may not appear in every database. We therefore recommend verifying the tooth count on your old ABS ring or the spline count on your drive shaft before placing your order. Comparing our detailed technical specifications with your existing parts ensures complete peace of mind and prevents unnecessary returns.

Why shop at CVJoint24

As the international shop of a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, CVJoint24 occupies a unique position. Rather than offering every generic vehicle component, we concentrate our expertise on driveline technology. This allows us to deliver exceptional category depth that few general factors can match, particularly for models like the Mazda 323 S. Choosing us gives you direct access to technical knowledge to help you find the correct parts. We combine uncompromising product quality with an extensive understanding of European motoring conditions. Whether you need a complete drive shaft for your Mazda 323 S or a replacement ABS reluctor ring, you can depend on us for exact fitment and long-lasting durability backed by our specialist knowledge in All car makes.

Frequently Asked Questions about Drivetrain Parts for Mazda 323 S – Spare Parts & Drive Shafts

How do I know which drive shaft fits my Mazda 323 S?

The easiest way is to select your vehicle's make, model and engine variant in our selector. We also recommend checking the spline count (number of teeth) on your original shaft to ensure 100% compatibility.

Can I replace just the CV joint instead of the complete drive shaft on my Mazda?

Yes, as long as the shaft itself is straight and undamaged, you can replace just the inner or outer CV joint, which is often a more economical solution.

Why does the ABS ring crack on the Mazda 323 S?

This is usually caused by corrosion building up beneath the ring on the CV joint. As rust expands, it exerts pressure that eventually causes the metal ring to crack, disrupting the ABS sensor signal.

What are the most common signs of a failing outer CV joint?

A distinctive clicking or knocking noise on full steering lock while accelerating is the classic symptom of a worn outer constant velocity joint.

Do your CV joint kits for Mazda 323 S include everything needed for replacement?

Yes, our kits come complete with the CV joint, CV boot, grease, clips and, where applicable, a new centre bolt or axle nut.

How many drive shafts does a Mazda 323 S have?

Because the Mazda 323 S is front-wheel drive, it has two drive shafts – one on the left and one on the right – transferring power from the gearbox to the front wheels.