Mazda 5

Spare parts and drivetrain components for Mazda 5.

Products for Mazda 5

34 products
25 - 34 of 34
Item no.:240507
  • Position: Front right, Inner
  • Inner splines: 32
  • Splines gearbox side: 28
  • Seal diameter: 43 mm
  • Outer diameter: 81 mm
Item no.:0612112
  • Total length: 90 mm
Item no.:0951738
Item no.:295782
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 28
Item no.:0578262
  • Position: Front, Outer
  • Inner splines: 24
  • Splines wheel side: 28
  • Outer diameter: 84 mm
Item no.:0407528
  • Position: Inner
  • Outer diameter: 90 mm
Item no.:0533283
  • Position: Outer
  • Inner splines: 32
  • Splines wheel side: 28
  • Seal diameter: 62 mm
  • Outer splines: 28
Item no.:0699997
Item no.:1118671
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 623 mm
Item no.:0522807
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 58,5 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Showing 25–34 of 34 products

Drivetrain for Mazda 5

The drivetrain on a Mazda 5 is an engineered assembly responsible for transferring power from the engine and gearbox straight to the driven wheels. As a popular and versatile family car, the Mazda 5 is often subjected to demanding and varied loads, from everyday urban driving to fully packed holiday trips, placing high demands on components such as drive shafts and CV joints to function faultlessly. Here at CVJoint24, you will find a dedicated range tailored specifically for this model. We understand the importance of every part in the power transmission working together in harmony to minimise wear and maximise fuel economy. By choosing the correct spare parts, you extend the lifespan of your vehicle and ensure a safe, comfortable driving experience for the whole family. Our range covers the most frequent requirements for the Mazda 5, with particular focus on the components most prone to wear over time on European roads.

How the drivetrain is engineered on the Mazda 5

The Mazda 5 uses a front-wheel-drive configuration where power is distributed via a transversely mounted engine and gearbox. This layout requires two drive shafts of differing lengths to reach the front wheels efficiently. Each Mazda 5 drive shaft is fitted with two joints: an inner joint closest to the gearbox and an outer CV joint at the wheel hub. The outer joint is a Rzeppa-type constant velocity joint designed to handle substantial steering angles while transmitting torque, whereas the inner joint accommodates the changes in length that occur as the suspension moves up and down during driving. The complete assembly is protected by rubber CV boots that retain essential lubricating grease and keep out road dirt and moisture. A fully operational setup is vital to prevent unnecessary friction and power loss, which directly affects vehicle dynamics.

Common faults and symptoms

There are several distinct signs that the drivetrain components on your Mazda 5 are wearing out and require inspection. One of the most typical symptoms is a clicking or knocking sound clearly audible when cornering on full lock at low speeds, which almost always indicates a worn outer CV joint. If you experience vibrations through the steering wheel or the entire cabin during acceleration, this can point to excessive play in an inner CV joint or an out-of-balance driveshaft. It is also vital to inspect the CV boots regularly; a split boot quickly allows grease to escape and abrasive road grit to enter the joint. Left unattended, the joint will fail in a short space of time, potentially leading to total breakdown. Ignoring these warning signs can result in far more costly secondary damage to the gearbox and front suspension.

Common parts to replace on the Mazda 5

For the Mazda 5, drive shafts and outer CV joints represent the most frequently replaced transmission components. Our product range includes several complete drive shaft variants and specific outer CV joints tailored to the model's various engine options and gearboxes. Replacing a complete drive shaft is often a highly cost-effective solution, providing both inner and outer joints alongside brand new CV boots in one ready-to-fit unit, eliminating the risk of premature failure from aged parts. Here are the primary categories to consider for your vehicle:

  • Drive shafts for Mazda 5 – Complete assemblies for both right- and left-hand sides, ready to install.
  • Outer CV joints for Mazda 5 – Ideal when only the wheel-end joint has suffered wear or contamination.

By focusing on these specific components, you can quickly restore original driving performance and eliminate annoying noises. We ensure our car parts meet or exceed original equipment standards to give you long-lasting durability.

How to find the right part for your Mazda 5

Explore the relevant subcategory for your Mazda 5:

When dealing with a vehicle that has several potential driveline issues, it pays to navigate straight to the right category. By checking the exact product areas for the Mazda 5, it is easier to distinguish between faults in a drive shaft, CV joint or propeller shaft and proceed to the section that best matches your symptoms and fitment.

Identifying the exact component for your Mazda 5 can sometimes be tricky due to technical variations across engine sizes, manual or automatic transmissions, and production years. The most reliable method to find the correct spare part on cvjoint24.com is to select your vehicle's make, model and engine. By choosing your car's exact specifications, our system filters out unsuitable components and presents the verified parts for your vehicle. We also recommend checking the technical specifications in the product details, such as the tooth count on the ABS ring or overall shaft length, if multiple options exist for your year of manufacture. Our catalogue is structured to ensure high accuracy in your search results, preventing incorrect orders and returns. If you are uncertain about fitment, our technical team specialised in the drivetrain is always on hand to assist you with your selection.

Why shop at CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, with deep technical expertise in power transmission for Japanese marques such as Mazda. When you purchase from us, you access a specialist range with immense depth, meaning we regularly stock components that general motor factors struggle to supply. We focus uncompromisingly on quality and accurate fitment, which is crucial for safety-critical components such as drive shafts and constant velocity joints. Our dedication to drivelines means you receive expert technical advice and products built to withstand severe climates, salted roads and extreme seasonal variations across Europe. With reliable dispatch from our central Swedish warehouse in Helsingborg and a convenient search by vehicle make, model and engine, we are the natural choice for Mazda 5 owners seeking high-grade car parts and specialised know-how. We combine technical competence with genuine care to keep your car driving smoothly and vibration-free.

Frequently Asked Questions about Mazda 5 Drivetrain – Find the Right Drive Shaft and CV Joint

How do I know if my Mazda 5 needs a new drive shaft?

The most common signs are vibrations under acceleration or heavy noises from the front suspension. If you notice a damaged CV boot with grease splattered on the inside of the wheel, it is very likely that the drive shaft or CV joint needs replacing.

Can I replace only the outer CV joint on my Mazda 5?

Yes, if the issue is solely with the outer joint (often heard as a clicking noise when turning), you can save money by replacing just the outer CV joint rather than the complete drive shaft.

Do all drive shafts fit every Mazda 5 model?

No, specifications vary depending on the engine (e.g. petrol vs diesel) and gearbox. Always select your Mazda 5 model and engine variant on cvjoint24.com to ensure you find the exact fit.

What causes vibrations under acceleration in my Mazda 5?

This is often caused by wear in the inner CV joint. When play develops there, the driveshaft can no longer rotate properly centred under load, causing noticeable vibrations throughout the car.

Is it difficult to replace a CV joint on a Mazda 5 yourself?

It requires proper tools and some mechanical experience, as parts of the suspension need to be dismantled. However, for a confident DIY mechanic with the right instructions, it is an entirely achievable project.

Why is it important to check the CV boots on a Mazda 5?

The boot is the sole protection for the CV joint. If it splits, the grease escapes and dirt enters, which will ruin the hardened bearing surfaces in the joint in just a few dozen kilometres.