Mazda CX 3

Spare parts and drivetrain components for the Mazda CX 3.

Products for Mazda CX 3

28 products
1 - 24 of 28
Item no.:0500588
  • Position: Outer
  • Inner splines: 23
  • Splines wheel side: 28
  • Seal diameter: 59 mm
  • Outer splines: 28
Item no.:0616033
  • Outer diameter: 22 mm
  • Diameter: 78 mm
Item no.:143698
  • Position: Inner
  • Inner splines: 23
  • Splines gearbox side: 28
  • Total length: 114 mm
Item no.:353137
  • Position: Outer
  • Inner splines: 23
  • Splines wheel side: 28
Item no.:352475
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 28
  • Total length: 147 mm
Item no.:0563411
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 59 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Item no.:1147129
  • Position: Front left
  • Splines gearbox side: 31
  • Splines wheel side: 28
  • Total length: 621 mm
Item no.:2113013
  • Position: Front right
  • Splines gearbox side: 31
  • Splines wheel side: 28
  • Total length: 996 mm
Item no.:112486
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 624 mm
  • Diameter 1: 82 mm
  • Diameter 2: 79 mm
Item no.:211284
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 995 mm
  • Diameter 1: 82 mm
  • Diameter 2: 79 mm
Item no.:0918258
  • Inner diameter: 45 mm
  • Outer diameter: 70 mm
  • Height: 25 mm
Item no.:0935457
Item no.:392798
  • Position: Front
Item no.:699704
  • Position: Rear
Item no.:0550055
  • Position: Outer
  • Inner splines: 23
  • Splines wheel side: 28
  • Outer diameter: 82 mm
Item no.:353119
  • Position: Front, Outer
  • Inner splines: 23
  • Splines wheel side: 28
  • Seal diameter: 59 mm
  • Thread size: M22X1,5
Item no.:0675771
  • Total length: 95 mm
Item no.:0962685
  • Inner diameter: 38,8 mm
  • Outer diameter: 65,2 mm
Item no.:0990473
Item no.:119606
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 635 mm
Item no.:214215
  • Position: Front right
  • Splines gearbox side: 31
  • Splines wheel side: 28
  • Total length: 980 mm
Item no.:0635675
  • Outer diameter: 22 mm
  • Diameter: 78 mm
Showing 1–24 of 28 products

Drivetrain for Mazda CX 3

The drivetrain in a Mazda CX 3 is a sophisticated setup engineered to transfer power from the engine to the wheels with maximum efficiency and minimal loss. As a compact SUV, the Mazda CX 3 places demanding loads on its components, particularly when balancing city driving with rougher surfaces. Maintaining the drivetrain is crucial to preserving the car's distinctive handling and fuel economy. At cvjoint24.com, we understand the technical nuances of this model and supply only components that meet or exceed original specifications.

Selecting the correct components for your car's power delivery ensures quiet operation as well as extended service life for the entire vehicle. A properly functioning drivetrain reduces unnecessary wear on the gearbox and suspension, ultimately saving money on costly repairs. As a Swedish driveline specialist shipping from our central warehouse in Helsingborg, Sweden, we provide the technical expertise needed to keep your Mazda CX 3 running safely on the road for years to come.

How the Mazda CX 3 drivetrain works

The Mazda CX 3 relies on a modern architecture where the drivetrain plays a central role in driving dynamics. Depending on whether your car is front-wheel drive or all-wheel drive, the system features critical parts such as drive shafts, CV joints and, in AWD configurations, a propeller shaft. Power originates at the engine, routes through the gearbox, and is delivered out to the wheels via the drive shafts. Every component is precision-engineered to manage the high torque developed during acceleration and engine braking.

The drive shafts on a Mazda CX 3 are fitted with both inner and outer CV joints. The outer constant velocity joints are vital as they transfer power while the wheels turn through sharp steering angles. The inner joints accommodate the longitudinal travel generated by suspension movement. This complete assembly is protected by flexible CV boots that retain lubricating grease while sealing out road dirt and moisture. If a CV boot splits, the delicate bearings inside the joint are exposed, quickly causing severe failure if left unaddressed.

Common problems and symptoms

Several distinct symptoms indicate that the drivetrain in your Mazda CX 3 is wearing out. One of the most typical signs of a failing outer CV joint is a rhythmic clicking or knocking noise audible during sharp turns at low speeds, such as during parking manoeuvres. If the noise disappears when driving straight ahead, the outer joint is almost certainly the culprit. In contrast, vibrations felt through the steering wheel or car chassis under acceleration point towards worn inner constant velocity joints or an unbalanced drive shaft.

Another frequent issue involves split drive shaft boots. If you spot grease splattered on the inside of the wheel rim or suspension components, a CV boot has cracked or torn. This requires prompt attention, as dirt and grit will contaminate the joint and ruin its precision-machined surfaces in short order. Ignoring these warning signs can result in a snapped driveshaft, leading to a complete loss of drive. Early detection and replacing worn car parts is the best defence against breakdown.

Common parts to replace on the Mazda CX 3

For the Mazda CX 3, drive shafts and outer CV joints are the parts most frequently replaced over time. Our range is tailored to cover the most common needs for this specific model, with an emphasis on durability and exact fitment. Outer joints typically wear faster due to high articulation angles, whereas complete drive shafts are usually fitted once both inner and outer components have reached the end of their service life.

Here you will find the most relevant product categories for your car:

  • Drive shaft Mazda CX 3 – Complete shafts for a quick, straightforward replacement.
  • Outer CV joint Mazda CX 3 – High-grade joints when only the outer section requires renewal.

By choosing model-specific spare parts from our range, you can be confident that splines, overall length, and ABS rings match your vehicle's factory specifications. This makes workshop or home installation hassle-free and avoids the premature failures associated with ill-fitting universal components.

How to find the right part for your Mazda CX 3

Navigate directly to the right category for your Mazda CX 3:

On a vehicle where several drivetrain faults can share similar symptoms, starting in the right section saves time. By comparing the dedicated categories for the Mazda CX 3, identifying whether the issue lies in the drive shaft, CV joint or propeller shaft becomes much clearer, allowing you to select the correct replacement parts with confidence.

Finding the exact spare part for your Mazda CX 3 is simple. The easiest method is to select your car's make, model, and engine variant in our vehicle selector. The system instantly filters our catalogue to show components compatible with your car's production year, engine, and drive system. This is especially important for driveshafts, where specifications differ between manual and automatic gearboxes or front-wheel drive and four-wheel drive configurations.

Alongside vehicle filtering, we recommend checking key technical measurements, such as the tooth count on the ABS reluctor ring or the spline counts on the shaft ends. We provide detailed specifications on every product page so you can easily cross-reference with the unit removed from your vehicle. If you need assistance, our customer service team is on hand to guide you. As dedicated driveline specialists, we have the technical knowledge to help you order the correct part first time, saving you time and hassle in the garage.

Why shop with cvjoint24.com

cvjoint24.com is not simply another general car parts retailer; we are a dedicated Swedish specialist focused on driveline and power transmission components. We provide deep technical expertise and comprehensive stock depth that general suppliers often lack. When you buy from us, you receive components chosen for their exceptional build quality and reliability, engineered to handle the demands of modern vehicles like the Mazda CX 3.

We combine specialist advice and in-depth product knowledge with efficient online ordering, dispatching orders across the EU directly from our Swedish warehouse. Thanks to our intuitive make, model and engine filtering, swift delivery and dedicated customer care, you can order with absolute confidence. We know that exact fitment is vital in driveline repairs, and we leave nothing to chance. Choose cvjoint24.com for reliable spare parts built to perform on European roads.

Frequently Asked Questions about Drivetrain Parts for Mazda CX 3 – Find the Right Spares

How do I know if my Mazda CX 3 needs a new CV joint?

The most common signs are a clicking noise when turning at low speeds or vibrations during acceleration. You should also check whether the CV boot is split and has leaked grease.

How do I find parts that fit my Mazda CX 3?

Simply select your Mazda CX 3 model, year and engine variant on our website; it is the most reliable way to find the exact drive shaft or CV joint tailored to your car.

Do you sell complete drive shafts for Mazda CX 3?

Yes, we offer complete drive shafts that include both inner and outer joints as well as CV boots, which is often the most straightforward replacement option.

What is the difference between an outer and an inner CV joint on this model?

The outer CV joint sits closest to the wheel and accommodates steering angles, whilst the inner joint sits closest to the gearbox and accommodates suspension movement.

Are your parts for Mazda CX 3 original equipment quality?

Our components are carefully selected to match or exceed OE standards, focusing on a precise fit and long-term durability.

Why is it important to replace a damaged CV boot on my Mazda CX 3 immediately?

A split CV boot lets in road dirt and moisture while allowing lubricating grease to escape. This ruins the CV joint bearings very quickly, leading to a more costly replacement of the entire joint.