Mazda CX 30

Welcome to CVJoint24, your Swedish driveline specialist for the Mazda CX 30. We stock a carefully chosen selection of premium components engineered to keep your car's drivetrain...

Products for Mazda CX 30

14 products
1 - 14 of 14
Item no.:0580058
  • Position: Outer
  • Inner splines: 33
  • Splines wheel side: 28
  • Seal diameter: 59 mm
  • Outer splines: 28
Item no.:1136912
  • Position: Front left
  • Splines gearbox side: 31
  • Splines wheel side: 28
  • Total length: 637 mm
Item no.:355155
  • Position: Front, Outer
  • Inner splines: 32
  • Splines wheel side: 28
  • Seal diameter: 59,8 mm
  • Thread size: M22X1,5
Item no.:514057
  • Position: Rear right
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 846 mm
  • ABS teeth: 48
Item no.:412225
  • Position: Rear left
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 806 mm
  • ABS teeth: 48
Item no.:212529
  • Position: Front right
  • Splines gearbox side: 31
  • Splines wheel side: 28
  • Total length: 1,003 mm
Item no.:111474
  • Position: Front left
  • Splines gearbox side: 31
  • Splines wheel side: 28
  • Total length: 640 mm
Item no.:216439
  • Position: Front right
  • Splines gearbox side: 31
  • Splines wheel side: 28
  • Total length: 1,015 mm
Item no.:653825
  • Position: Rear, Outer
  • Inner splines: 23
  • Splines wheel side: 26
  • Seal diameter: 51 mm
  • ABS teeth: 48
Item no.:210917
  • Position: Front right
  • Splines gearbox side: 31
  • Splines wheel side: 28
  • Total length: 1,012 mm
Item no.:116361
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 640 mm
Item no.:219978
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 1,005 mm
Item no.:141633
  • Position: Front left, Inner
  • Inner splines: 32
  • Splines gearbox side: 28
  • Seal diameter: 40 mm
  • Total length: 176 mm
Item no.:353093
  • Position: Front, Outer
  • Inner splines: 32
  • Splines wheel side: 28
  • Seal diameter: 59,8 mm
  • Thread size: M22X1,5

Drivetrain for Mazda CX 30

The Mazda CX 30 is a modern crossover combining sharp styling with advanced engineering, and its drivetrain is no exception. To preserve the driving dynamics and stability Mazda is renowned for, every transmission component must work in perfect harmony. As specialists in all car makes, we understand the specific demands placed on the Mazda CX 30, whether front-wheel drive or all-wheel drive. Our range is carefully curated to meet these requirements, focusing on durability and an exact fit. Selecting the correct spare parts is vital for your car's longevity and road safety. By prioritising quality over cheap alternatives, you ensure your vehicle retains its original handling. At CVJoint24, we are dedicated to offering the finest solutions for your Mazda, making us the natural choice for maintenance or driveline repairs.

How the drivetrain is engineered on the Mazda CX 30

The drivetrain on a Mazda CX 30 is designed to transfer engine power to the wheels with minimal loss and maximum precision. The system comprises several critical components, with the gearbox transferring torque to the drive shafts. Depending on the specification, the car uses either two front drive shafts or, on all-wheel-drive models, an additional propeller shaft and rear driveshafts. Each drive shaft on the Mazda CX 30 is equipped with inner and outer CV joints, enabling the wheels to articulate vertically and steer while transmitting continuous power. The outer CV joint is crucial for steering angle, whilst the inner joint accommodates suspension travel. Mazda relies on high-grade materials to keep unsprung weight low without compromising strength. Understanding this layout is key to diagnosing issues early. A sound drivetrain delivers not only reliable traction, but also optimal fuel efficiency and ride refinement, as imbalance in these rotating parts quickly causes intrusive vibrations throughout the bodywork.

Common faults and symptoms

Several clear signs indicate that drivetrain components on your Mazda CX 30 are wearing out. One classic symptom is a distinct clicking or knocking noise when taking tight turns at low speed. This typically points to a worn outer CV joint on your Mazda CX 30, or that grease has leaked out through a split boot. If you notice vibrations through the steering wheel or seat under acceleration, an imbalanced inner CV joint or bent drive shaft is often the cause. It is also essential to inspect the CV boots regularly; once torn, road grime and moisture penetrate, rapidly wearing down the precision-machined internal surfaces. Ignoring these symptoms can result in complete failure, leaving you stranded. Staying alert to changes in vehicle handling and unusual noises allows you to rectify problems early, preventing costly secondary damage across the transmission system.

Common parts to replace on the Mazda CX 30

For the Mazda CX 30, drive shafts and outer constant velocity joints are the most common wear items within the drivetrain. Our catalogue offers several variants of complete drive shafts and dedicated outer CV joints tailored directly to this model. Replacing a complete drive shaft is frequently the most cost-effective approach, providing fresh inner and outer joints alongside brand new CV boots in one unit, minimising future maintenance. The main categories for the Mazda CX 30 include:

  • Drive shaft – Complete assemblies for both offside and nearside to restore full functionality.
  • Outer CV joint – For targeted repairs when only the wheel-side joint is worn and the shaft remains intact.
  • CV boots – Essential protection to keep abrasive dirt out of your new joints.

These components endure heavy loads, especially on European roads in wet and freezing winter conditions. Choosing parts with the correct specifications is crucial to support vehicle safety systems such as ABS and stability control, which rely on readings from reluctor rings fitted directly to the CV joints.

How to find the right part for your Mazda CX 30

Navigate directly to the relevant subcategory for your Mazda CX 30:

When diagnosing driveline faults, selecting the right category straight away saves time. Comparing the specific component sections for the Mazda CX 30 makes it easy to distinguish between drive shaft, CV joint, or prop shaft issues, guiding you to the page matching your symptoms and technical requirements.

With our fitment guarantee, you can order with absolute confidence from our dedicated Mazda section.

Why shop with CVJoint24

CVJoint24 is far more than a standard online retailer; we are your dedicated specialist in automotive driveline components. As a Swedish driveline specialist shipping from our central warehouse in Helsingborg, we provide an unmatched blend of technical knowledge and an extensive inventory. When ordering from us, you can trust our strict quality checks and accurate vehicle selection tools. We understand that driveline failures require prompt attention, which is why we dispatch quickly across the EU to minimise your car's downtime. Our fitment guarantee means we take full responsibility for ensuring the parts recommended fit your Mazda CX 30. Rely on a genuine specialist for a straightforward, dependable experience whenever your car requires maintenance.

Frequently Asked Questions about Drivetrain for Mazda CX 30

How do I know if my Mazda CX 30 needs a new drive shaft?

The most common signs are vibrations during acceleration or unusual noises from the underside of the vehicle. If the vibrations stop when you release the throttle, the culprit is often an inner CV joint or the drive shaft itself.

Can I replace only the outer CV joint on my Mazda CX 30?

Yes, if the shaft itself and the inner joint are in good condition, you can save money by replacing just the outer CV joint. We offer standalone outer CV joints for the Mazda CX 30.

Do all drive shafts fit every Mazda CX 30 model?

No, there are differences depending on whether the car is front-wheel drive or all-wheel drive, as well as its engine and gearbox configuration. Always select your specific make, model and engine to get the correct part.

What is included when I buy a CV joint from you?

Our CV joints are supplied as complete kits, which typically include the joint itself, a tailored CV boot, grease, clamps, and any required circlip or bolt.

How quickly are parts delivered for my Mazda?

We dispatch fast across the EU directly from our central warehouse in Helsingborg, Sweden, so you can get your Mazda CX 30 back on the road as quickly as possible.

Does the fitment guarantee apply when I select my vehicle details?

Yes, when you use our vehicle selector to choose your make, model and engine variant, your recommended purchase is covered by our fitment guarantee.