Mazda Xedos 6

Spare parts and drivetrain components for Mazda Xedos 6.

Products for Mazda Xedos 6

37 products
25 - 37 of 37
Item no.:350435
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Item no.:0606955
  • Total length: 91 mm
Item no.:0535644
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 56 mm
  • Outer splines: 28
  • ABS teeth: 46
Item no.:0337567
  • ABS teeth: 44
  • Inner diameter: 72 mm
  • Outer diameter: 90 mm
  • Width: 11,6 mm
Item no.:0305657
  • Position: Front
  • ABS teeth: 44
  • Inner diameter: 70 mm
  • Outer diameter: 97 mm
  • Width: 10 mm
Item no.:339133
  • ABS teeth: 44
  • Inner diameter: 72 mm
  • Outer diameter: 90 mm
  • Width: 11,6 mm
Item no.:0693454
Item no.:7314949
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 56 mm
  • Outer splines: 28
  • ABS teeth: 44
Item no.:350437
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 56 mm
  • Outer splines: 28
  • ABS teeth: 44
Item no.:0660585
  • Total length: 96 mm
Item no.:0984546
  • Inner diameter: 42 mm
  • Outer diameter: 56 mm
Item no.:243203
  • Position: Inner
  • Splines gearbox side: 28
  • Splines wheel side: 22
Item no.:337402
  • ABS teeth: 44
  • Inner diameter: 72 mm
  • Outer diameter: 90 mm
  • Width: 11,6 mm
Showing 25–37 of 37 products

Drivetrain for Mazda Xedos 6

The Mazda Xedos 6 was introduced as a premium mid-size saloon, renowned for its refined styling and remarkably smooth running. To maintain this exceptional driving experience, a fully functioning drivetrain is vital. The drivetrain transfers power from the engine, via the gearbox, straight to the road wheels. On a Mazda Xedos 6, this system must handle both torque and steering angles with immense precision. At CVJoint24, we understand the technical demands of this specific model and offer components that meet or exceed original equipment specifications. Whether you drive the lively 1.6-litre four-cylinder or the silky-smooth V6, the power delivery demands parts that are calibrated precisely to prevent vibrations and premature wear on surrounding chassis components. Keeping your drivetrain properly maintained is an investment in your car's longevity and future value.

How the Mazda Xedos 6 drivetrain is built

The driveline layout of the Mazda Xedos 6 uses a classic front-wheel-drive design with a transversely mounted engine. Drive is sent from the gearbox via two drive shafts of unequal length out to the front wheels. Each driveshaft is fitted with two joints: an inner joint at the gearbox that permits axial plunge, and an outer CV joint for Mazda Xedos 6 that allows steering angles whilst transmitting continuous power. To ensure the car's safety systems function seamlessly, an ABS ring for Mazda Xedos 6 is frequently mounted directly on the outer joint. This reluctor ring provides vital wheel-speed pulses to the ABS sensor. The entire joint assembly is sealed within rubber CV boots packed with specialised grease to reduce friction and keep out dirt and road grime—crucial for component longevity through harsh European winters where salt and surface water constantly attack metal parts.

Common faults and symptoms

There are several distinct signs indicating that the drivetrain on your Mazda Xedos 6 is worn. One of the most typical symptoms is a rhythmic clicking or knocking sound on full steering lock during acceleration, which almost always points to a worn outer constant velocity joint. If you experience distinct vibrations through the car body under acceleration, it often suggests that the inner CV joints or the drive shaft itself is unbalanced or worn. Another widespread issue is the ABS warning light illuminating, or the ABS kicking in prematurely during gentle braking at low speeds. This is frequently caused by a cracked or corroded ABS ring feeding erratic signals to the control unit. Ignoring these warning signs can result in secondary damage to your gearbox and wheel bearings, making it essential to act as soon as unusual noises or vibrations arise to prevent costlier repairs later.

Common parts to replace on Mazda Xedos 6

Based on our order history and technical experience, three main product groups are most frequently needed for the Mazda Xedos 6. We maintain a targeted range to meet these requirements with high precision. Here are the most relevant categories for your vehicle:

  • Drive shafts for Mazda Xedos 6: Complete units to replace when both inner and outer joints are worn or when a shaft has bent. We keep several variations in stock.
  • Outer CV joints for Mazda Xedos 6: The most exposed component, which wears quickly if a CV boot splits. We offer several versions for an exact fit.
  • ABS rings for Mazda Xedos 6: A compact yet essential part for braking safety. We offer 4 types with accurate tooth counts for dependable signal generation.

By concentrating on these core categories, we provide deeper stock availability and higher technical expertise than general car parts retailers. Each component is thoroughly checked to match the original specifications of the Xedos 6 platform, ensuring your car preserves its factory handling and smooth ride.

How to find the right part for Mazda Xedos 6

Continue to the relevant sub-category for your Mazda Xedos 6:

When dealing with potential driveline issues on this model, it is wise to start in the correct section immediately. By comparing the specific product categories for Mazda Xedos 6, it is simpler to distinguish between problems in the drive shaft, CV joint or propeller shaft, directing you straight to the page that best matches your symptoms and fitment.

Selecting the right spare part for a Mazda Xedos 6 can sometimes present a challenge, as specifications vary depending on engine size, model year and whether the vehicle has a manual or automatic gearbox. The most dependable way to identify the correct component is to filter by your car's exact make, model and engine variant in our store. It is always wise to double-check physical dimensions as well, such as the tooth count on the ABS ring or the spline count on the drive shaft, as alterations or aftermarket replacements may have occurred during the vehicle's lifespan. Our customer support team and technical documentation are readily on hand to help verify that the part you order matches what is on your vehicle, preventing misorders and returns.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, and we have built our reputation on deep technical competence and an uncompromising focus on quality. Unlike broad aftermarket sellers, we specialise exclusively in power transmission, allowing us to supply components for the Mazda Xedos 6 that general retailers often do not carry. We understand the critical need for precise fitment and durability, especially on older executive saloons where precision is key to preserving original driving dynamics. When purchasing from us, you get far more than just a spare part—you receive the confidence of parts curated by experts who know the drivetrain inside and out. With prompt delivery across the EU from our warehouse in Helsingborg, Sweden, and knowledgeable support ready to tackle any technical queries, we are your trusted partner for keeping your Mazda running smoothly for miles to come.

Frequently Asked Questions about Drivetrain Parts for Mazda Xedos 6

How do I know if my Mazda Xedos 6 needs a new drive shaft?

The most common signs are heavy vibrations under acceleration or grease leaking from the CV boots. If the vibrations stop when you lift off the accelerator, it is often the inner joint of the drive shaft that is worn.

Does the same CV joint fit all Mazda Xedos 6 models?

No, there are differences depending on whether the car has the 1.6L or the 2.0L V6 engine, as well as whether it is equipped with ABS. Always select your vehicle make, model and engine to find the right part.

Why do ABS rings often crack on the Mazda Xedos 6?

This is usually caused by corrosion building up beneath the ring on the CV joint. The pressure from the rust eventually becomes high enough to crack the hardened steel ring, causing the ABS sensor to lose count of the teeth.

Can I replace just the outer CV joint instead of the entire drive shaft?

Yes, provided the shaft itself is straight and the inner joint is in good condition, you can easily replace just the outer CV joint, which is often a more economical solution.

What causes the clicking noise when turning?

This is a classic symptom of a worn outer CV joint. As the balls inside the joint wear down, play develops, producing a rhythmic clicking sound whenever the joint is loaded at an angle.

How many splines does the drive shaft have on a Mazda Xedos 6?

The number of splines (teeth) varies between different model years and engine options. It is therefore essential to check the specifications on the product page against your old part if you are unsure.