Mercedes 124 T Model

Welcome to CVJoint24, the international store of a Swedish driveline specialist offering quality drivetrain parts for the Mercedes 124 T Model. We stock a comprehensive selection of...

Products for Mercedes 124 T Model

17 products
1 - 17 of 17
Item no.:7316503
  • Position: Rear
  • Splines wheel side: 25
  • Total length: 663 mm
  • Joint diameter: 102 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:7316504
  • Position: Rear
  • Splines wheel side: 25
  • Total length: 665 mm
  • Joint diameter: 96 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:0223516
  • Diameter: 30 mm
  • Bearing thickness: 22 mm
  • Hole spacing c/c: 120 mm
Item no.:6182932
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 635 mm
  • Joint diameter: 100 mm
Item no.:0256622
  • Diameter: 30 mm
  • Bearing thickness: 22,4 mm
  • Hole spacing c/c: 130 mm
Item no.:697921
  • Position: Rear
Item no.:6446317
  • Position: Inner
  • Inner splines: 27
  • Outer diameter: 108 mm
Item no.:644122
  • Position: Rear, Inner
  • Inner splines: 27
  • Seal diameter: 94 mm
  • Joint diameter: 108 mm
Item no.:649589
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 94 mm
  • Total length: 108 mm
  • Joint diameter: 108 mm
Item no.:619785
  • Position: Rear
  • Splines wheel side: 25
  • Total length: 663 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:0480424
  • Position: Rear, Inner
  • Inner splines: 25
  • Outer diameter: 100 mm
Item no.:6161084
  • Position: Rear
  • Splines wheel side: 25
  • Total length: 640 mm
  • Diameter 1: 102 mm
  • Diameter 2: 108 mm
Item no.:643552
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm
Item no.:619856
  • Position: Rear
  • Splines wheel side: 25
  • Total length: 634 mm
  • Flange diameter: 108 mm
Item no.:612656
  • Position: Rear
  • Total length: 641 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:1176697
  • Position: Front left
  • Splines wheel side: 25
  • Total length: 529 mm
  • Joint diameter: 98 mm
  • ABS teeth: 96
Item no.:2182170
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 564 mm
  • Joint diameter: 98 mm
  • ABS teeth: 96

Drivetrain for Mercedes 124 T Model

The Mercedes 124 T Model, often referred to as the S124, is renowned for its exceptional build quality and durable engineering. To preserve the ride comfort and dependability this estate is celebrated for, the drivetrain must be maintained with precision. At CVJoint24, you will find a dedicated selection of parts tailored specifically to this platform. We focus on offering components that meet or exceed original equipment specifications, which is essential for a car frequently driven over many thousands of kilometres in demanding conditions.

Our product range covers the most vital power-transmission components. By selecting the correct parts from a dedicated specialist, you ensure that your Mercedes continues to deliver the refined, quiet ride characteristic of the 124 series. We have extensive technical knowledge of this chassis, enabling us to provide reliable solutions in practice, whether for a standard variant or a higher-output T-Model estate.

How the drivetrain is engineered on the Mercedes 124 T Model

The drivetrain on the Mercedes 124 T Model uses a classic rear-wheel-drive layout, although certain versions were fitted with the early 4MATIC all-wheel-drive system. Torque is transferred from the gearbox via a long, two-piece propeller shaft to the rear differential. A key component in this layout is the propeller shaft centre bearing for Mercedes 124 T Model, which stabilises the prop shaft and suppresses vibrations that would otherwise travel into the passenger cabin.

From the rear differential, drive shafts extend out to the rear hubs. These shafts are fitted with CV joints that accommodate suspension articulation while maintaining continuous power delivery. The T-Model estate, with its higher payload rating and frequent self-levelling rear suspension, places distinct demands on these components. It is therefore vital to fit driveshafts built to handle the extra load a heavy estate can experience. The entire system is engineered to run quietly and smoothly, which demands that every rotating part is accurately balanced.

Common faults and symptoms

Despite its legendary build quality, the Mercedes 124 T Model is not immune to drivetrain wear. One of the most typical indications of a problem is vibration occurring at specific road speeds or under hard acceleration. This is often caused by a worn centre bearing or an unbalanced propeller shaft. If you notice a clicking noise on tight turns or experience chassis shudder under load, an inner CV joint for Mercedes 124 T Model may be beginning to fail.

Another frequent issue is a split or leaking CV boot. When a boot tears, lubricating grease escapes and road dirt penetrates the joint, leading to rapid wear and joint failure. Drivers may also notice a pronounced clonk when engaging gear or lifting off the accelerator, typically pointing to play in the drive shafts or worn differential mountings. Ignoring these warnings can lead to more extensive and costly damage; early diagnosis and prompt renewal of worn parts are always recommended to safeguard the vehicle's driving dynamics.

Typical replacement parts for the Mercedes 124 T Model

To help you maintain your car efficiently, we have organised the most sought-after components into clear categories. Focusing on these assemblies allows you to restore factory performance effectively. Key categories available for the Mercedes 124 T Model include:

  • Drive shafts for Mercedes 124 T Model – Complete shaft assemblies for straightforward fitting and dependable service life.
  • Inner CV joints for Mercedes 124 T Model – Ideal for curing driveline shudder under acceleration.
  • Propeller shaft centre bearings for Mercedes 124 T Model – Vital for eliminating prop shaft vibration and droning.

Fitting a complete replacement drive shaft is often far more time-efficient than attempting to overhaul an old unit, particularly on classic Mercedes models where precise tolerances are critical. Our centre bearings are selected to endure the stresses typical of the T-Model chassis, delivering an enduring solution to driveline vibrations.

How to find the right part for your Mercedes 124 T Model

Navigate directly to the relevant subcategory for your Mercedes 124 T Model:

On a vehicle where several drivetrain components can cause similar symptoms, starting in the correct category saves time. By comparing the exact sections for the Mercedes 124 T Model, it becomes easier to distinguish between drive shaft, constant velocity joint or prop shaft faults, allowing you to proceed to the page that matches your car's symptoms and specification.

Identifying the exact replacement part for a classic Mercedes can occasionally prove tricky, as specifications varied across different engine options and production years. The most reliable way to browse our catalogue is by filtering by your car's make, model and engine variant. This ensures you only see components that are directly compatible with your particular Mercedes 124 T Model, helping you get the right component first time.

If you are ever unsure about a specific part, we also recommend checking your vehicle's chassis number (VIN), as Mercedes frequently introduced running revisions during production. Our database is configured to account for these technical variations, giving you total peace of mind when ordering. Should you have any questions regarding fitment or technical dimensions, our knowledgeable team is on hand to guide you through our comprehensive Mercedes range. Our goal is to ensure you receive the correct part on your very first order.

Why choose CVJoint24?

CVJoint24 is your dedicated EU supplier for all things relating to the drivetrain and power transmission. As the international shop of a Swedish driveline specialist, we combine an extensive stockholding with in-depth technical expertise. We recognise that your Mercedes 124 T Model deserves the best, which is why we never compromise on the quality of our components. Our accurate fitment standards ensure you can order with complete confidence.

Alongside our product knowledge, we provide dependable logistics tailored to modern repair needs, shipping swiftly from our central warehouse across Europe to minimise your vehicle's downtime in the workshop or garage. We take pride in our specialist focus, delivering a smooth, professional buying experience from start to finish. Order your drivetrain components from CVJoint24 and enjoy the reassurance of dealing with true driveline professionals.

Frequently Asked Questions about Drivetrain for Mercedes 124 T Model

What are the most common signs of a worn centre bearing on a Mercedes 124 T Model?

The most common symptoms are vibrations felt through the floor or seats, often between 40 and 80 km/h. You might also notice a whining or grinding noise coming from beneath the centre of the car while driving.

Does the same drive shaft fit all engine variants of the 124 T Model?

No, drive shafts can vary depending on engine output, gearbox type and whether the car is equipped with ABS or ASD. Always select your vehicle's make, model and engine to ensure the correct fitment.

How often should I inspect the CV boots on my Mercedes 124?

We recommend inspecting the CV boots at every service or wheel change. A split CV boot quickly leads to constant velocity joint failure due to dirt ingress and grease loss.

What causes vibrations during acceleration on my S124?

Vibrations under acceleration are often caused by wear in the inner CV joints. Once play develops, it causes an imbalance that transfers through the drive shaft into the chassis.

Do you offer a fitment guarantee on parts for the Mercedes 124 T Model?

Yes, we offer a fitment guarantee when you choose your vehicle by make, model and engine. This ensures the part is guaranteed to fit your specific car model.

How quickly can I get my parts delivered?

We offer dispatch on in-stock items so that you can get your Mercedes 124 T Model back on the road without delay.