Mercedes Citan Tourer

Spare parts and drivetrain components for the Mercedes Citan Tourer.

Products for Mercedes Citan Tourer

22 products
1 - 22 of 22
Item no.:1198288
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • Total length: 695 mm
  • Joint diameter: 90 mm
Item no.:2107610
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • Total length: 921 mm
  • Joint diameter: 79 mm
Item no.:0550652
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 56,5 mm
  • Outer splines: 27
  • Thread size: M22X1,5
Item no.:0637365
  • Outer diameter: 21 mm
  • Diameter: 76 mm
Item no.:2163789
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 27
  • Total length: 978 mm
  • Joint diameter: 82 mm
Item no.:1123779
  • Position: Front left
  • Splines gearbox side: 34
  • Splines wheel side: 27
  • Total length: 626 mm
  • Diameter 1: 82 mm
Item no.:110288
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 29
  • Total length: 705 mm
Item no.:2155930
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 29
  • Total length: 955 mm
Item no.:3535376
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 56,5 mm
  • Outer splines: 27
  • Thread size: M22X1,5
Item no.:0502407
  • Position: Front right, Outer
  • Inner splines: 23
  • Splines wheel side: 27
  • Outer diameter: 82 mm
Item no.:1120600
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 25
  • Total length: 687 mm
Item no.:0655888
  • Total length: 115 mm
Item no.:141294
  • Position: Front left, Inner
  • Inner splines: 22
  • Splines gearbox side: 26
  • Seal diameter: 40 mm
  • Outer diameter: 75 mm
Item no.:243714
  • Position: Front right, Inner
  • Inner splines: 22
  • Splines gearbox side: 26
  • Seal diameter: 33 mm
  • Outer diameter: 75 mm
Item no.:3561750
  • Position: Front, Outer
  • Inner splines: 22
  • Splines wheel side: 27
  • Seal diameter: 56 mm
  • Outer diameter: 79 mm
Item no.:217115
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
Item no.:1148524
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 700 mm
Item no.:218013
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 23
  • Total length: 914 mm
  • Joint diameter: 84 mm
Item no.:1149692
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 29
  • Total length: 695 mm
Item no.:2106516
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 29
  • Total length: 960 mm
Item no.:343265
  • Position: Front, Inner
  • Inner splines: 22
  • Seal diameter: 40 mm
  • Total length: 168 mm
  • Outer splines: 26

Drivetrain for Mercedes Citan Tourer

The drivetrain in a Mercedes Benz Citan Tourer is a critical assembly responsible for transmitting the engine's power to the wheels smoothly and efficiently. As a versatile vehicle often used for both family trips and commercial transport, the drivetrain is subjected to demanding and varied loads. Maintaining components such as drive shafts and CV joints is vital to preserving the comfort and safety expected of the brand. At CVJoint24, we understand the specific requirements of this model and supply a range tailored to meet the exact technical specifications of your vehicle. By choosing the right parts, you ensure that power transfer takes place without losses or strange noises, significantly extending the service life of your car.

How the drivetrain is engineered on the Mercedes Benz Citan Tourer

The Mercedes Benz Citan Tourer relies on a front-wheel-drive architecture where power from the engine travels through the gearbox out to the front wheels. This layout demands robust drive shafts capable of managing steering angles and suspension movement while simultaneously transferring torque. The system consists of an inner constant velocity joint at the gearbox, a solid shaft bar, and an outer CV joint at the wheel hub. The outer CV joint is particularly sophisticated, as it must allow the wheel to steer whilst rotating under full load. For the Mercedes Benz Citan Tourer, precision engineering in these components is essential to prevent steering wheel vibrations and ensure stable handling, whether the vehicle is empty or fully loaded.

Common faults and symptoms

There are several clear warning signs that the drivetrain in your Mercedes Benz Citan Tourer is wearing out. One of the most frequent symptoms is a clicking or knocking noise when taking sharp corners, which typically indicates that an outer CV joint is failing. Chassis vibrations during acceleration can point towards worn inner joints or an unbalanced driveshaft. It is also essential to inspect the CV boots regularly; if a boot splits, grease leaks out and abrasive dirt enters, rapidly destroying the polished bearing surfaces inside the joint. Ignoring these warning signs can result in complete mechanical failure where the car loses drive entirely, which is both dangerous and expensive to repair.

Common replacement parts for the Mercedes Benz Citan Tourer

Within the drivetrain category for the Mercedes Benz Citan Tourer, components subjected to continuous mechanical wear are the most common replacements. Our range includes dedicated drive shafts and outer CV joint variants, covering the most frequent needs for this model series. Replacing a complete drive shaft is often a time-efficient solution, as you receive the inner and outer joints alongside fresh boots assembled in one package. If the fault is isolated to the wheel side, replacing only the outer CV joint may suffice. Here are the key categories for your vehicle:

  • Drive shafts for Mercedes Benz Citan Tourer – Complete assemblies for straightforward installation.
  • Outer CV joints for Mercedes Benz Citan Tourer – For repairs when experiencing knocking noises during turns.

How to find the right part for your Mercedes Benz Citan Tourer

Navigate directly to the right category for your Mercedes Benz Citan Tourer:

On a vehicle with several possible drivetrain issues, starting directly in the relevant subcategory is always best. By comparing the exact sections for the Mercedes Benz Citan Tourer, distinguishing between faults in a drive shaft, CV joint, or propeller shaft becomes much easier, allowing you to proceed to the page that matches your symptoms and fitment.

Finding the correct replacement car parts can seem daunting, but CVJoint24 makes it simple. The most dependable method to source the exact part for your Mercedes Benz Citan Tourer is to select your vehicle's make, model, and engine variant. Filtering our catalogue this way ensures you only view parts engineered specifically for your engine and production year. Because spline counts and overall shaft lengths can vary depending on the gearbox type, this selection is your best guarantee of an exact fit. We also recommend inspecting your car's complete drivetrain during routine servicing to detect split boots before costly internal damage occurs.

Why shop with CVJoint24

As a Swedish driveline specialist shipping across the EU, we provide dedicated technical expertise that generic parts retailers rarely offer. We concentrate exclusively on vehicle drivelines, giving us immense depth in our range for the Mercedes Benz Citan Tourer. When you order from us, you receive high-quality spare parts selected for their precision fit and proven durability. Our deep category knowledge means we can offer qualified support throughout your purchase. With rapid dispatch from our Swedish warehouse and simple vehicle filtering, we are the trusted choice for drivers who demand the very best for their Mercedes.

Frequently Asked Questions about Mercedes Benz Citan Tourer - Drivetrain & Spare Parts

How do I know if my Mercedes Benz Citan Tourer needs a new drive shaft?

The most common signs are vibrations through the vehicle under acceleration or a persistent clicking noise when turning. If you spot grease on the inside of the wheel rim, it is often a sign of a split CV boot, which quickly leads to the drive shaft needing replacement.

Do all outer CV joints fit every version of the Citan Tourer?

No, there can be differences depending on the engine variant and gearbox. We therefore recommend always selecting your specific make, model and engine to ensure you get the correct part.

Is it better to replace the entire drive shaft rather than just the CV joint?

It depends on the wear. Replacing the complete drive shaft is often more straightforward and offers a better long-term solution, as both the inner and outer joints as well as the boots are renewed at the same time, saving valuable workshop time.

What causes a CV joint to fail on a Citan Tourer?

The most frequent cause is a split CV boot. When the boot tears, grease escapes and road dirt, water and grit penetrate the joint, causing rapid wear and eventual failure.

Can I replace the drive shaft myself on my Mercedes Benz Citan Tourer?

Yes, if you have the right tools and mechanical experience, it is entirely feasible. However, it requires dismantling parts of the suspension and having a torque wrench to tighten the central hub bolt correctly.

How many drive shafts are available in the range for my car?

We currently stock 5 different drive shafts tailored for the Mercedes Benz Citan Tourer, ensuring excellent coverage across most model variants.