Mercedes GL Class

Spare parts and drivetrain components for Mercedes GL Class.

Products for Mercedes GL Class

59 products
49 - 59 of 59
Item no.:415889
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 849 mm
  • Joint diameter: 104 mm
Item no.:149427
  • Position: Front left, Inner
  • Inner splines: 26
  • Seal diameter: 45 mm
  • Total length: 186 mm
  • Outer splines: 37
Item no.:242962
  • Position: Front right, Inner
  • Inner splines: 26
  • Splines gearbox side: 37
  • Total length: 375 mm
Item no.:620660
  • Total length: 39 mm
  • Diameter: 15 mm
Item no.:517742
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 863 mm
Item no.:623219
  • Position: Rear
Item no.:628731
  • Position: Rear
Item no.:353051
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 70 mm
  • Outer splines: 30
  • Thread size: M24X1,5
Item no.:146655
  • Position: Front left, Inner
  • Inner splines: 33
  • Seal diameter: 45 mm
  • Total length: 185 mm
  • Joint diameter: 88 mm
Item no.:0681558
  • Outer diameter: 19 mm
  • Diameter: 68 mm
Item no.:353071
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 70 mm
  • Outer splines: 30
  • Thread size: M24X1,5
Showing 49–59 of 59 products

Drivetrain for Mercedes GL Class

The Mercedes GL Class is a vehicle that defines strength and comfort in the luxury SUV segment. To preserve these qualities, the drivetrain must remain in peak condition. Power transmission in such a heavy and technically sophisticated vehicle is subjected to enormous strain, particularly when driving under demanding conditions or carrying heavy loads. As driveline specialists, we supply components that match original equipment specifications, which is vital for maintaining your vehicle's driving dynamics and safety. Our range covers everything from complete shafts to individual joints, all selected for durability and precision.

Maintaining the drivetrain on a Mercedes GL Class is not just about replacing parts when they fail; it is about proactively ensuring that power from the engine reaches the wheels without loss or vibration. Choosing the correct parts from a dedicated specialist helps extend the service life of the vehicle's entire transmission system. We focus on offering parts engineered to endure European roads and the severe demands that permanent four-wheel drive places on a large SUV.

How the Mercedes GL Class drivetrain is designed

The drivetrain of the Mercedes GL Class is a sophisticated assembly, typically built around the permanent 4MATIC all-wheel drive system. This setup distributes torque between the front and rear axles to maximise grip and stability. Central to this layout is a propeller shaft for the Mercedes GL Class, transmitting torque from the gearbox to the differentials. This shaft must be balanced to perfection to prevent vibrations from spreading through the chassis and compromising passenger comfort.

From the differentials, power is routed to the wheels via drive shafts. Each drive shaft is fitted with both inner and outer CV joints, allowing for wheel articulation during steering and suspension travel. The outer joint manages large angles during cornering, while the inner joint accommodates axial plunge as the suspension compresses and rebounds. The entire system relies on intact CV boots and optimal lubrication to prevent premature wear across all moving parts.

Common faults and symptoms

One of the clearest signs of drivetrain trouble on a Mercedes GL Class is noise while manoeuvring. If you hear a clicking or knocking sound on full lock, it often indicates that an outer CV joint for the Mercedes GL Class is failing. This is usually caused by a split CV boot letting grit in and grease out, rapidly wearing down the joint's precision surfaces.

Vibrations are another frequent symptom, particularly under acceleration or at specific cruising speeds. If vibrations occur while accelerating, a worn inner CV joint for the Mercedes GL Class is frequently the cause. If vibrations remain constant and speed-dependent, the problem may lie with the propeller shaft or its centre bearing. Acting quickly on these symptoms is essential, as an unbalanced driveline can cause consequential damage to the gearbox and differentials, resulting in far more costly repairs.

Common parts to replace on the Mercedes GL Class

In our range for the Mercedes GL Class, we have categorised our parts to help you find what you need quickly. We see high demand for complete drive shafts, as replacing the entire assembly is often a more cost-effective repair than rebuilding individual joints when wear is extensive. Here are the categories available for this model:

  • Drive shafts for Mercedes GL Class
  • Outer CV joints for Mercedes GL Class
  • Inner CV joints for Mercedes GL Class (1 article available)
  • Propeller shafts for Mercedes GL Class

Replacing worn components with precision-fit parts ensures your vehicle's advanced four-wheel drive system operates exactly as intended from the factory. We always recommend inspecting the CV boots at every service to prevent the need for premature joint or shaft replacements.

How to find the right part for your Mercedes GL Class

Navigate to the relevant section for your Mercedes GL Class:

On a vehicle with several potential driveline issues, starting in the correct category saves time. By comparing the exact component sections for the Mercedes GL Class, it is easy to distinguish between drive shaft, CV joint, or prop shaft faults and proceed to the page that matches your symptoms and fitment needs.

Identifying the precise part for your Mercedes GL Class can be challenging, as specifications vary according to engine type, chassis code, and model year. To make this process straightforward and reliable, you can select your vehicle by make, model, and engine variant. Filtering by your exact vehicle configuration shows only the compatible car parts, ensuring a hassle-free purchase without incorrect orders.

If you are unsure whether you require a complete drive shaft or just a constant velocity joint, check the technical specifications provided for each product. We list detailed measurements so you can verify them against the component installed on your car. Be sure to check whether the part is designed for the front or rear axle, as well as any differences between the left and right sides, which are common across the GL Class driveline.

Why shop with CVJoint24

CVJoint24 is not a generic car-parts store; we are the international shop of a Swedish driveline specialist, operating with a deep focus on driveshafts and power transmission. Our expertise allows us to provide product depth and technical knowledge that general automotive retailers often cannot match. When you order from us, you receive carefully sourced components built to stringent quality standards, ensuring your Mercedes GL Class continues to deliver the refined performance you expect.

We combine high product accuracy with a straightforward ordering experience. By focusing exclusively on driveline components, we maintain robust stock levels in our central Swedish warehouse, ensuring prompt delivery across the EU when your vehicle is on the ramp. Our goal is to be the premier supplier for car owners and professional workshops looking for dependable driveline solutions. With our support, maintaining your vehicle with the correct spare parts is always simple.

Frequently Asked Questions about Drivetrain Parts for Mercedes-Benz GL-Class

How do I know if my Mercedes-Benz GL-Class needs a new drive shaft?

The most common signs are vibrations under acceleration or a clicking noise when cornering. Strong vibrations often indicate internal wear in the drive shaft, while clicking noises typically originate from the outer CV joint.

Do all drive shafts fit every GL-Class model?

No, drive shafts vary depending on the engine, gearbox, and model year. It is therefore essential to select your car's exact make, model, and engine variant to ensure you receive a part with an accurate fit for your vehicle.

What is the difference between an inner and an outer CV joint?

The outer CV joint sits closest to the wheel and accommodates steering angles, whilst the inner CV joint is located next to the gearbox or differential and accommodates changes in length as the suspension moves up and down.

Can I replace just the CV boot if it is split?

Yes, if you catch a split CV boot early before road dirt has damaged the joint itself, replacing the boot and repacking it with fresh grease is often sufficient. However, if the joint has already started to make noise, the entire CV joint or drive shaft must be replaced.

Why does my car still vibrate after replacing the CV joint?

If vibrations persist, the issue may lie with the propeller shaft or its centre bearing. On a four-wheel-drive vehicle like the GL-Class, the prop shaft is a critical component that can cause severe imbalance if worn or damaged.

Are your parts for the Mercedes-Benz GL-Class of original equipment quality?

Yes, we only supply components that meet or exceed original equipment standards, specifically chosen to handle the high demands placed on the drivetrain of a Mercedes-Benz GL-Class.