Mercedes GLS

Spare parts and drivetrain components for the Mercedes GLS.

Products for Mercedes GLS

37 products
1 - 24 of 37
Item no.:1160032
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 34
  • Total length: 637 mm
Item no.:511150
  • Position: Rear right
  • Splines gearbox side: 30
  • Splines wheel side: 34
  • Total length: 827 mm
Item no.:2106404
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 34
  • Total length: 1,007 mm
Item no.:4178964
  • Position: Rear left
  • Splines gearbox side: 30
  • Splines wheel side: 34
  • Total length: 826 mm
Item no.:4143089
  • Position: Rear left
  • Splines gearbox side: 34
  • Splines wheel side: 34
  • Total length: 829 mm
Item no.:5159876
  • Position: Rear right
  • Splines gearbox side: 34
  • Splines wheel side: 34
  • Total length: 811 mm
Item no.:3248570
  • Position: Front
  • Total length: 450 mm
  • Number of joints: 2
  • Number of centre bearings: 0
Item no.:351934
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 70 mm
  • Outer splines: 30
  • Thread size: M24X1,5
Item no.:1115612
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 30
  • Total length: 685 mm
  • Joint diameter: 99 mm
Item no.:2170648
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 30
  • Total length: 1,015 mm
  • Joint diameter: 99 mm
Item no.:0571601
  • Position: Outer
  • Inner splines: 37
  • Seal diameter: 70 mm
  • Outer splines: 30
  • Thread size: M24X1,5
Item no.:0608036
  • Outer diameter: 19 mm
  • Diameter: 68 mm
Item no.:148279
  • Position: Front left, Inner
  • Inner splines: 33
  • Seal diameter: 45 mm
  • Total length: 185 mm
  • Joint diameter: 88 mm
Item no.:416844
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 849 mm
  • Joint diameter: 104 mm
Item no.:0241591
  • Position: Front
  • Total length: 640 mm
  • Number of joints: 2
  • Outer diameter 1: 95 mm
  • Bolt circle diameter 1: 81 mm
Item no.:355187
  • Position: Front, Outer
  • Inner splines: 27
  • Splines wheel side: 34
  • Seal diameter: 68 mm
  • Thread size: M16X1,5
Item no.:0600283
  • Total length: 122 mm
Item no.:0622781
  • Total length: 124 mm
Item no.:148098
  • Position: Front, Inner
  • Inner splines: 26
  • Seal diameter: 45 mm
  • Joint diameter: 92 mm
  • Outer splines: 37
Item no.:693955
  • Position: Rear
Showing 1–24 of 37 products

Drivetrain for Mercedes Benz GLS

The Mercedes Benz GLS is one of the market's most capable and luxurious SUVs, which places exceptionally high demands on its drivetrain. Power transmission in a GLS must cope with both substantial weight and massive torque, particularly when towing heavy loads or driving off-road. At CVJoint24, we understand these technical challenges and offer a specialised range tailored specifically for this model. Our focus is on supplying components that not only fit physically, but also preserve the ride comfort and safety expected by any Mercedes owner. By choosing the right parts for your drivetrain, you ensure that the vehicle's advanced systems operate harmoniously without unnecessary wear on surrounding components.

How the drivetrain is engineered on the Mercedes Benz GLS

The drivetrain on a Mercedes Benz GLS is a complex assembly centred around the intelligent 4MATIC all-wheel-drive system. Engine power is distributed via a gearbox to a transfer box, which in turn directs torque to both the front and rear axles. To facilitate this power transfer, a central propeller shaft runs along the underside of the vehicle. At the wheels, drive shafts fitted with constant velocity joints accommodate both suspension movement and steering articulation while transferring power to the road surface. This design requires every component, from the smallest outer CV joint for Mercedes Benz GLS to the heavy-duty driveshafts, to be manufactured with the utmost precision to endure the stresses generated by such a heavy and powerful vehicle.

Common faults and symptoms

Despite the high build quality of the Mercedes Benz GLS, drivetrain components can wear out over time. One of the most typical signs of a worn outer CV joint is a clicking or knocking sound clearly audible when making sharp turns at low speeds. If you instead experience chassis vibrations under acceleration, this may indicate an imbalance or wear in a drive shaft or in the vehicle's prop shaft. It is also essential to inspect for grease leakage around the wheel arches, which often stems from a split CV boot. If a boot tears, dirt enters the joint, quickly resulting in complete failure. Ignoring these symptoms can lead to costly secondary damage to the gearbox and differentials, making early diagnosis and replacement of worn parts critical to the car's longevity.

Common parts to replace on the Mercedes Benz GLS

In our range for the Mercedes Benz GLS, we have identified the most critical components that regularly require attention. We stock drive shafts covering various positions and engine options for this model. In addition, we supply variants of outer CV joints and specific propeller shafts. Replacing a propeller shaft on a Mercedes Benz GLS is often essential if you experience persistent vibrations that wheel balancing does not resolve. The drive shafts also endure tremendous stress, especially on vehicles frequently used for towing or in demanding conditions. By proactively replacing worn parts, you maintain the car's original handling characteristics and prevent unexpected breakdowns on the road.

How to find the right part for your Mercedes Benz GLS

Navigate directly to the appropriate section for your Mercedes Benz GLS:

On a vehicle with several potential drivetrain issues, it pays to start in the correct category straight away. By comparing the exact sections for the Mercedes Benz GLS, it becomes easier to distinguish between drive shaft, CV joint or propeller shaft issues, allowing you to proceed to the page that best matches your symptoms and fitment.

Why choose CVJoint24

CVJoint24 is not merely another car parts supplier; we are the international shop of a Swedish driveline specialist, with our central warehouse in Helsingborg, Sweden, dedicated entirely to drivelines and power transmission. Our category depth for the Mercedes Benz GLS ensures we deliver expertise and parts that general retailers often lack. We understand the importance of precise fitment and premium material quality, which is why we only supply proven components. When shopping with us, you enjoy a dependable buying experience where selecting your car's make, model and engine guarantees you receive the correct part straight away. With our dedication to drivelines and customer satisfaction, we are the partner you need to keep your Mercedes Benz GLS in pristine mechanical order year after year.

Frequently Asked Questions about Mercedes-Benz GLS Drivetrain & Spare Parts

How do I know if my Mercedes-Benz GLS needs a new drive shaft?

The most common symptoms are vibrations through the car during acceleration or unusual noises from underneath. If the vibrations increase with speed, it is often a sign of imbalance or internal wear in the drive shaft.

Do all CV joints fit every GLS model?

No, specifications can vary depending on the engine and chassis number. Always select your car's make, model and engine to ensure you get a part with the correct number of splines and proper dimensions.

What causes a clicking noise when turning in a GLS?

A clicking noise on full steering lock is almost always caused by a worn outer CV joint. This typically happens when a CV boot has split, allowing dirt to enter the joint's bearings.

Is it difficult to replace the propeller shaft on a Mercedes-Benz GLS?

It is a technical job that requires the right tools and a solid understanding of the vehicle's all-wheel-drive system. We recommend that the work is carried out by an experienced mechanic to ensure correct balance and alignment.

Why should I choose CVJoint24 for my spare parts?

We are driveline specialists with a dedicated range and extensive technical expertise. We offer precise part identification by vehicle make, model and engine, providing parts with guaranteed fitment for your Mercedes.

How often should I inspect the drivetrain on my GLS?

We recommend a visual inspection of the CV boots and joints at every regular service or tyre change. Catching a split boot early can save you substantial repair costs.