Mercedes S Class
Car parts and drivetrain components for Mercedes S Class.
Products for Mercedes S Class
- Diameter: 30 mm
- Height: 65 mm
- Hole spacing c/c: 208 mm
- Bearing thickness: 13 mm
- Position: Front left
- Total length: 519 mm
- Splines gearbox side: 34
- Splines wheel side: 30
- Position: Front right
- Total length: 530 mm
- Splines gearbox side: 27
- Splines wheel side: 30
- Position: Front right
- Total length: 566 mm
- Splines gearbox side: 27
- Splines wheel side: 30
- Total length: 504 mm
- Splines gearbox side: 34
- Splines wheel side: 27
- Position: Outer
- Seal diameter: 71 mm
- Inner splines: 25
- Outer splines: 30
- Joint diameter: 109 mm
- Total length: 800 mm
- Splines gearbox side: 27
- Splines wheel side: 27
- Position: Front
- Height: 10 mm
- Inner diameter: 53 mm
- Outer diameter: 73 mm
- Position: Rear
- Total length: 807 mm
- Splines gearbox side: 27
- Splines wheel side: 27
- Position: Front right, Inner
- Total length: 173 mm
- Splines gearbox side: 27
- Splines wheel side: 27
- ABS teeth: 27
- Position: Front left, Inner
- Total length: 141 mm
- Splines gearbox side: 34
- Splines wheel side: 27
- ABS teeth: 27
- Position: Front right, Inner
- Inner splines: 24
- Total length: 168 mm
- Splines gearbox side: 27
- Position: Front left, Inner
- Inner splines: 24
- Total length: 137 mm
- Position: Rear
- Total length: 805 mm
- Splines gearbox side: 30
- Splines wheel side: 27
- Position: Front left
- Total length: 504 mm
- Splines gearbox side: 27
- Splines wheel side: 34
- Position: Outer
- Seal diameter: 71 mm
- Inner splines: 25
- Outer splines: 30
- Joint diameter: 85 mm
- Position: Front right, Inner
- Total length: 173 mm
- Splines gearbox side: 27
- Splines wheel side: 27
- ABS teeth: 27
- Position: Front left, Inner
- Total length: 141 mm
- Splines gearbox side: 34
- Splines wheel side: 27
- ABS teeth: 27
Frequently Asked Questions about Drivetrain for Mercedes S Class
How do I know if my Mercedes S Class needs a new drive shaft?
Common symptoms include heavy vibrations under acceleration or abnormal noises from the wheel arches. If the vibrations increase with speed and can be felt throughout the car, it is often an indication that a drive shaft is unbalanced or worn.
What is the difference between an inner and an outer CV joint on an S-Class?
The outer CV joint sits closest to the wheel and typically causes clicking noises when cornering when worn. The inner CV joint sits closer to the gearbox and usually causes longitudinal vibrations through the car under acceleration.
Why does my Mercedes S Class vibrate at motorway speeds?
Vibrations at higher speeds can often be traced back to the propeller shaft or its centre bearing. If the rubber mounting in the centre bearing has perished or cracked, the prop shaft can begin to resonate, creating uncomfortable vibrations in the cabin.
Can I replace just the CV boot if it is split?
Yes, if you catch a split boot early before dirt and moisture have damaged the CV joint itself, replacing the CV boot and applying fresh grease is often sufficient. This is a very cost-effective preventative measure.
How does a broken ABS ring affect my Mercedes?
A cracked or corroded ABS ring sends faulty signals to the wheel speed sensors. This can cause the ABS system to trigger unnecessarily under braking, or illuminate warning lights for the ABS and electronic stability programme (ESP) on the dashboard.
Does the fitment guarantee apply when I search by make, model and engine?
Yes, when you use our vehicle selector to choose your make, model and engine, our fitment guarantee applies. This means we guarantee that the parts displayed as compatible will fit your specific Mercedes S Class.