Mercedes SL

Spare parts and drivetrain components for Mercedes SL.

Products for Mercedes SL

22 products
1 - 22 of 22
Item no.:331499
  • Position: Front
  • Inner diameter: 53 mm
  • Outer diameter: 73 mm
  • Height: 10 mm
Item no.:6157153
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 635 mm
  • Joint diameter: 100 mm
Item no.:0284252
  • Diameter: 30 mm
  • Bearing thickness: 22,4 mm
  • Hole spacing c/c: 130 mm
Item no.:0271020
  • Diameter: 30 mm
  • Hole spacing c/c: 130 mm
Item no.:0224555
  • Diameter: 30 mm
  • Bearing thickness: 22 mm
  • Hole spacing c/c: 120 mm
Item no.:634051
  • Position: Rear
Item no.:515664
  • Position: Rear right
  • Splines wheel side: 36
  • Total length: 523 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:696796
  • Position: Rear
Item no.:698652
  • Position: Rear
Item no.:0630380
  • Position: Rear
  • Total length: 75 mm
Item no.:644418
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 94 mm
  • Total length: 108 mm
  • Joint diameter: 108 mm
Item no.:648867
  • Position: Rear, Inner
  • Inner splines: 27
  • Seal diameter: 94 mm
  • Joint diameter: 108 mm
Item no.:611815
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 803 mm
  • ABS teeth: 48
Item no.:649493
  • Position: Rear, Inner
  • Inner splines: 27
  • Outer diameter: 120 mm
Item no.:6152230
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 530 mm
  • Diameter 1: 102 mm
  • Diameter 2: 120 mm
Item no.:617786
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 530 mm
  • Joint diameter: 102 mm
  • Joint diameter, gearbox side: 120 mm
Item no.:653092
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 68 mm
  • Outer splines: 27
  • ABS teeth: 96
Item no.:647663
  • Position: Rear, Inner
  • Inner splines: 30
  • Splines gearbox side: 27
  • Seal diameter: 45 mm
  • Outer diameter: 102 mm
Item no.:614400
  • Position: Rear
  • Splines wheel side: 25
  • Total length: 648 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:0569853
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 53 mm
  • Outer splines: 36
  • Thread size: M20X1,5

Drivetrain for Mercedes Benz SL

The Mercedes Benz SL is a symbol of luxury and performance, where every single drivetrain component plays a vital role in the overall driving experience. The drivetrain is responsible for transferring engine power to the wheels with minimal loss and pinpoint precision. For a car such as the SL, which often combines high power outputs with sophisticated chassis engineering, parts like drive shafts and propeller shafts must function flawlessly under all conditions. Maintaining the drivetrain is not only a matter of reliability, but also of preserving the distinctive road feel and refined comfort that define a Mercedes Benz.

At CVJoint24, you will find a curated selection of components specifically suited to meet these high standards. We focus on offering car parts that match original equipment specifications to ensure your car's dynamics remain fully intact. By choosing the right parts for your drivetrain, you can prevent costly repairs and ensure power delivery remains smooth and efficient, whether you drive a classic model or a modern iteration of this legendary series.

How the drivetrain is engineered on the Mercedes Benz SL

The layout of the drivetrain on a Mercedes Benz SL traditionally follows a classic rear-wheel-drive concept, which is fundamental to the car's balanced handling characteristics. Power is generated by the engine and routed through the gearbox, where it is then transmitted via a central propeller shaft to the rear differential. From the differential, power is distributed to the rear wheels via two drive shafts. This layout demands components capable of managing both substantial torque and the complex angles caused by suspension movement and rapid acceleration.

The prop shaft on an SL is frequently an advanced assembly, often split into multiple sections with integrated centre bearings and flexible couplings to eliminate vibration and harshness. The drive shafts are in turn fitted with high-grade CV joints protected by durable CV boots. Because the Mercedes Benz SL often relies on an advanced multi-link rear suspension, the driveshafts must extend and plunge linearly while rotating, placing heavy demands on the precision and lubrication of the inner joints.

Common faults and symptoms

There are several clear signs that the drivetrain in your Mercedes Benz SL requires attention. One of the most typical symptoms is vibration felt through the bodywork or seat during acceleration or at specific speed ranges. This often points to an imbalance or wear in a Mercedes Benz SL propeller shaft, or that its centre bearing has begun to fail. If vibrations arise primarily under hard acceleration, worn inner constant velocity joints on the drive shafts may well be the cause.

Another common symptom is a clicking or knocking noise when taking sharp corners at low speeds, which is a classic indicator that an outer CV joint on a Mercedes Benz SL drive shaft is defective. You should also inspect the CV joint boots regularly; if they split, grease escapes and road dirt enters, rapidly destroying the joint. Spotting grease flung onto the inside of the wheel rim or inside the wheel arch is a clear sign to act before the entire shaft needs replacing.

Common parts to replace on the Mercedes Benz SL

Across our range for the Mercedes Benz SL, we see consistent demand for specific component groups that are vital to the vehicle's operation. We currently offer a focused selection of drive shafts and propeller shafts for this model series. It is often considerably more cost-effective to replace a complete drive shaft rather than trying to rebuild individual worn joints, especially given the garage labour time saved during installation.

Here are the primary categories for your car:

  • Drive shaft for Mercedes Benz SL – Complete shafts for dependable power transfer.
  • Propeller shaft for Mercedes Benz SL – Central shafts engineered to eliminate vibration.

In addition to these core components, related hardware such as centre bearings and vibration dampers frequently require renewal. By keeping these spare parts in top condition, you reduce strain on both the gearbox and rear differential, extending the operating life of your vehicle.

How to find the right part for your Mercedes Benz SL

Navigate to the right section for your Mercedes Benz SL:

On a model with multiple possible drivetrain issues, it is wise to start in the correct category straight away. Comparing the exact component sections for the Mercedes Benz SL makes it easier to distinguish between drive shaft, CV joint or prop shaft problems, taking you directly to the page that matches your symptoms and fitment.

Finding the correct replacement part for a Mercedes Benz SL can be tricky due to the numerous technical revisions and engine options offered over the production run. The most reliable way to ensure a correct fit is to filter by your car's make, model and engine variant. By selecting your exact specification, our catalogue updates automatically so you only see parts that are technically compatible with your vehicle and model year.

This is especially critical for parts such as driveshafts, where overall length, spline count and ABS ring design can vary significantly between different engine versions and gearbox types. We also advise checking the OE number on your original unit wherever possible. Should you need any guidance on which component fits your Mercedes Benz SL, our customer support team is always on hand with specialist drivetrain expertise.

Why choose CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist. We concentrate on a focused, technical field to deliver the deep expertise that general car parts retailers rarely provide. When ordering from us, you receive high-quality parts carefully selected to fit your Mercedes Benz SL perfectly. Our strength lies in specialised technical know-how and a dedication to correct fitment, helping you avoid incorrect purchases and unnecessary returns.

We know your Mercedes Benz SL deserves uncompromising quality, so we never cut corners on our components. With simple vehicle selection by make, model and engine, fast delivery across the EU from our Swedish warehouse, and friendly support from true drivetrain experts, CVJoint24 is the trusted choice for discerning drivers. Rely on a specialist for your car's power delivery – choose CVJoint24 for your driveline parts.

Frequently Asked Questions about Drivetrain for Mercedes Benz SL

How do I know if my Mercedes Benz SL needs a new drive shaft?

Common symptoms include clicking noises when cornering, vibrations under acceleration, or visible damage and leaks from the CV boots.

Do all propeller shafts fit all Mercedes Benz SL models?

No, propeller shafts vary in length and mounting depending on the engine, gearbox and wheelbase. Always filter by your car's make, model and engine to find the correct part.

Why is my car vibrating at high speeds?

Vibrations at higher speeds are often caused by an unbalanced prop shaft or a worn centre bearing. They can also stem from worn joints in the drive shafts.

Is it difficult to replace a drive shaft on a Mercedes Benz SL?

It requires technical knowledge and the proper tools, as SL models often feature advanced suspension setups. We recommend following the car's workshop manual closely.

How many drive shafts does a Mercedes Benz SL have?

Most SL models are rear-wheel drive and therefore have two rear drive shafts, one on each side of the differential.

Can I buy just the CV joint instead of the entire shaft?

In many cases we supply individual CV joints, but for the Mercedes Benz SL it is often more practical and reliable to replace the complete drive shaft to ensure optimal performance.