Mercedes Sprinter 2 T

Spare parts and drivetrain components for the Mercedes Sprinter 2 T.

Products for Mercedes Sprinter 2 T

22 products
1 - 22 of 22
Item no.:0266413
  • Inner diameter: 47 mm
  • Bearing thickness: 43 mm
  • Hole spacing c/c: 195 mm
Item no.:0204531
  • Total length: 25 mm
  • Diameter: 75 mm
Item no.:6238921
  • Position: Rear
  • Total length: 2,260 mm
  • Number of joints: 3
  • Outer diameter 1: 120 mm
  • Number of centre bearings: 1
Item no.:6292408
  • Position: Rear
  • Total length: 2,176 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:0241142
  • Position: Rear
  • Total length: 2,739 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:0231050
  • Total length: 2,720 mm
  • Number of joints: 3
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,8 mm
  • Outer diameter 2: 57 mm
Item no.:622900
  • Position: Rear
Item no.:0647544
  • Total length: 147 mm
  • Thread size: M22x1,5
  • Inner diameter: 29 mm
Item no.:0994255
  • Total length: 88 mm
  • Diameter: 24 mm
Item no.:627700
  • Position: Rear
  • Total length: 2,686 mm
  • Number of joints: 3
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,83 mm
Item no.:324560
  • Position: Front
  • Total length: 850 mm
Item no.:311491
  • Position: Front
  • Splines wheel side: 26
  • Total length: 630 mm
  • Joint diameter: 98 mm
  • ABS teeth: 54
Item no.:620303
  • Position: Rear
  • Total length: 2,745 mm
Item no.:0917122
  • Total length: 31 mm
  • Diameter: 31 mm
Item no.:0218411
  • Total length: 2,627 mm
Item no.:216462
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 935 mm
  • ABS teeth: 29
Item no.:7247878
  • Position: Rear
  • Total length: 2,396 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:113813
  • Position: Front left
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 595 mm
  • ABS teeth: 29
Item no.:0675018
  • Total length: 147 mm
  • Thread size: M22x1,5
  • Inner diameter: 29 mm
Item no.:0628972
  • Total length: 147 mm
  • Thread size: M22x1,5
  • Inner diameter: 29 mm

Drivetrain for Mercedes Benz Sprinter 2 T

The Mercedes Benz Sprinter 2 T is known as a dependable workhorse, but maintaining its performance requires a flawless drivetrain. The drivetrain is the system that transfers engine power to the wheels, and on this specific model, demands are particularly high due to heavy payloads and frequent driving in both urban traffic and on motorways. As specialists in this field, we understand the unique challenges faced by owners of the Mercedes Benz Sprinter 2 T when components begin to wear out. Investing in the right spare parts is not merely about repairs; it is an investment in your vehicle's service life and your safety on the road.

Our product range is carefully selected to meet the technical specifications of the Mercedes Benz Sprinter 2 T. We focus on supplying parts that match or exceed original equipment quality, which is critical for a van expected to perform day in, day out. Choosing the correct components reduces the risk of consequential damage to the gearbox and differential, saving both time and money for your business or private motoring in the long run.

How the drivetrain is engineered on the Mercedes Benz Sprinter 2 T

The drivetrain on a Mercedes Benz Sprinter 2 T is generally built around a rear-wheel-drive configuration. This means power is transmitted from the longitudinal engine through the gearbox and onward via a robust propeller shaft to the rear axle. Because the Sprinter 2 T often features a longer wheelbase, the propeller shaft typically consists of multiple sections joined by universal joints and centre bearings. This design is necessary to accommodate the angles and movement between the chassis and the live rear axle during driving.

Every component in this assembly must be in perfect balance. Even the slightest imbalance in a propeller shaft for the Mercedes Benz Sprinter 2 T can create transmitted vibrations that wear out both bearings and seals. The centre bearings play a crucial role by supporting the shaft and damping vibrations, whilst the U-joints allow the required articulation. For the Mercedes Benz Sprinter 2 T, these components are engineered to withstand high torque, but they are also exposed to weather, road grit and mechanical wear that eventually demand attention.

Common faults and symptoms

There are several clear warning signs that the drivetrain in your Mercedes Benz Sprinter 2 T requires attention. One of the most common symptoms is vibration felt throughout the vehicle body, often within specific speed ranges or under acceleration. These vibrations frequently originate from a worn centre bearing or an unbalanced prop shaft. If you hear a clunking noise when engaging gear or lifting off the accelerator, this can indicate play in the universal joints or the shaft splines.

Another symptom is a whining or grinding noise from underneath the vehicle, which typically suggests that a drivetrain bearing is nearing the end of its lifespan. For a Mercedes Benz Sprinter 2 T, it is vital not to ignore these early warnings. A failing prop shaft that shears whilst driving can cause extensive damage to the vehicle underbody and, in the worst cases, lead to an accident. Regularly inspecting boots and mountings is therefore good practice for any Sprinter owner.

Common replacement parts for the Mercedes Benz Sprinter 2 T

When it comes to driveline repairs on the Mercedes Benz Sprinter 2 T, the propeller shaft is by far the most common component requiring maintenance or complete replacement. We stock an extensive inventory covering the various configurations available for this model. Here are the primary categories you should be aware of:

  • Propeller shaft for Mercedes Benz Sprinter 2 T – complete shafts for different wheelbases and engine options.
  • Centre bearings – secure the propeller shaft in place and minimise vibrations.
  • Universal joints – enable angular power transmission and often wear under heavy loads.

Replacing a complete propeller shaft is often more cost-effective than attempting to rebuild an old shaft with multiple worn sections, providing you with a factory-balanced unit that ensures smooth, vibration-free running. For the Mercedes Benz Sprinter 2 T, the precision of these replacement parts is crucial to prevent recurring issues.

How to find the right part for the Mercedes Benz Sprinter 2 T

Navigate directly to the relevant category for the Mercedes Benz Sprinter 2 T:

On a vehicle with several possible driveline faults, it pays to start in the correct category straight away. Comparing the specific subcategories for the Mercedes Benz Sprinter 2 T makes it simpler to distinguish between drive shaft, CV joint or propeller shaft issues and proceed to the page that best matches your symptoms and fitment.

Identifying the exact part that fits your Mercedes Benz Sprinter 2 T can be challenging given the numerous technical variations based on model year, wheelbase and gearbox type. The most reliable method is to select your vehicle by make, model and engine variant in our store catalogue, which filters the results to show only parts verified for your specific specification.

When looking for a propeller shaft for the Mercedes Benz Sprinter 2 T, it is also useful to measure the overall length of your existing shaft where possible, as certain bespoke coachbuilt chassis may use unique dimensions. At CVJoint24, we organise our product details clearly so you can easily verify technical specifications. If you are unsure, our technical team is on hand to guide you, helping you avoid ordering errors and unnecessary returns. Getting the right part first time means your Mercedes Benz Sprinter 2 T is back on the road without delay.

Why buy from CVJoint24

CVJoint24 is not merely an online shop; we are the international store of a Swedish driveline specialist, sending parts across the EU from our central warehouse in Helsingborg, Sweden. When you buy components for your Mercedes Benz Sprinter 2 T from us, you benefit from specialist expertise that general car parts retailers rarely provide. We understand the technical details of a drivetrain and set rigorous standards for our suppliers to ensure every component meets the demands of professional use.

We combine a broad stock selection with fast European dispatch and knowledgeable customer support that genuinely knows the products. We want you to feel confident in your purchase, whether you are a DIY mechanic working on your own van or a garage sourcing dependable components for a customer's Mercedes Benz Sprinter 2 T. With our accurate catalogue lookup by make, model and engine, alongside our commitment to quality assurance, we are the natural choice for all your drivetrain needs.

Frequently Asked Questions about Drivetrain for Mercedes Benz Sprinter 2 T

What are the most common signs of a failing propeller shaft on a Mercedes Benz Sprinter 2 T?

The most common symptoms include severe vibrations throughout the vehicle while driving, clunking noises when shifting gears or accelerating, and grinding sounds from the centre bearing underneath the vehicle.

How many propeller shafts are available for the Mercedes Benz Sprinter 2 T in your range?

We currently offer 26 different items in the propeller shaft category to cover the various wheelbases and technical specifications for the Mercedes Benz Sprinter 2 T.

How do I find the correct part for my vehicle?

Simply select your Mercedes Benz Sprinter 2 T by make, model and engine variant in our vehicle selector to ensure you get a component with an exact fit for your van.

Why does my Mercedes Benz Sprinter 2 T vibrate at speeds over 80 km/h?

This is frequently caused by an unbalanced propeller shaft or a worn centre bearing. On a commercial van like the Sprinter 2 T, it is vital to rectify this promptly to prevent consequential damage to the gearbox.

Are your parts for the Mercedes Benz Sprinter 2 T of original equipment quality?

Yes, we only supply components that meet or exceed original equipment specifications, which is crucial for reliability in a heavily loaded commercial drivetrain.

Do I need to replace the entire propeller shaft or just the centre bearing?

If the vibrations have persisted for some time, the universal joints may also be damaged. In many cases, replacing the entire prop shaft assembly on a Mercedes Benz Sprinter 2 T is more cost-effective and dependable, ensuring you receive a fully balanced unit.