Mercedes Sprinter 3.5

Welcome to your specialist in drivetrain parts for the Mercedes Sprinter 3.5. As a dedicated Swedish driveline specialist, we offer a comprehensive range of premium components engineered...

Products for Mercedes Sprinter 3.5

20 products
1 - 20 of 20
Item no.:3195840
  • Position: Front left, Front right
  • Flange diameter: 108 mm
  • Total length: 690 mm
  • Splines wheel side: 30
Item no.:6256515
  • Position: Rear
  • Number of centre bearings: 2
  • Number of joints: 4
  • Total length: 3,476 mm
Item no.:6249708
  • Position: Rear
  • Number of centre bearings: 2
  • Number of joints: 4
  • Total length: 3,388 mm
Item no.:6274773
  • Position: Rear
  • Number of centre bearings: 2
  • Number of joints: 4
  • Total length: 3,377 mm
Item no.:6276638
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,703 mm
Item no.:6291620
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,813 mm
Item no.:6282202
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,787 mm
Item no.:6276703
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,777 mm
Item no.:6284030
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,750 mm
Item no.:6280389
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,757 mm
Item no.:6285248
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,681 mm
Item no.:6247201
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,717 mm
Item no.:0224251
  • Number of centre bearings: 2
  • Number of joints: 4
  • Total length: 2,813 mm
Item no.:628292
  • Position: Rear
  • Total length: 2,328 mm
Item no.:624046
  • Position: Rear
Item no.:628664
  • Position: Rear
Item no.:0402120
  • Position: Inner
  • Inner splines: 28
  • Joint diameter: 108 mm
Item no.:416825
  • Position: Rear left
  • Total length: 840 mm
  • Splines gearbox side: 30
  • Splines wheel side: 29
Item no.:514389
  • Total length: 890 mm
  • Splines wheel side: 29
Item no.:3520010
  • Position: Front, Outer
  • Inner splines: 28
  • Outer diameter: 102 mm
  • Splines wheel side: 30

Mercedes Sprinter 3.5 Drivetrain

The Mercedes Sprinter 3.5 is one of the most dependable vans on the market, but its drivetrain is subjected to extreme stress on a daily basis. As Swedish specialists in the drivetrain, we understand the specific challenges faced by owners of this workhorse. The powertrain in a Mercedes Sprinter 3.5 is essential to the vehicle's capacity to haul heavy loads efficiently and safely. We have built an extensive range of 21 carefully selected items covering everything from propeller shafts to specific CV joints. Every component in our warehouse is chosen for its durability and precision, which is vital for a vehicle that often operates in demanding commercial service. Choosing the right parts from an expert ensures your van maintains its original handling and reliability, while minimising the risk of costly consequential damage to other driveline components.

How the Drivetrain is Configured on the Mercedes Sprinter 3.5

The drivetrain on a Mercedes Sprinter 3.5 is a sophisticated setup engineered to handle high torque and sustained heavy loads. The system starts at the gearbox and extends either rearward or forward depending on the drive configuration. A central component in many Mercedes Sprinter 3.5 models is the robust propeller shaft, which is often sectioned to manage vibrations and changing driveline angles while driving. This shaft is supported by centre bearings and coupled via universal joints that demand exact balancing. Further out towards the wheels, we find the drive shafts, which are equipped with inner and outer CV joints. These constant velocity joints are protected by CV boots that keep lubricating grease in and dirt out. For the Mercedes Sprinter 3.5, every link in this chain is dimensioned to endure the weight and stresses generated under full payload, making material choice and manufacturing tolerances crucial to component service life.

Common Faults and Symptoms

Identifying drivetrain issues early on a Mercedes Sprinter 3.5 can save substantial sums in repair bills. One of the most prominent signs of wear is vibration felt through the vehicle floor or steering wheel. If these vibrations intensify with road speed, they frequently point to an imbalance or worn centre bearings in the prop shaft. Another typical sign is a distinct clicking or knocking noise when turning sharply at low speeds; this is a classic symptom of a worn outer CV joint on a Mercedes Sprinter 3.5. If you instead experience shaking or shuddering specifically under hard acceleration, the fault can often be traced back to an inner CV joint. It is also essential to inspect for grease leaking from the CV boots, as a split boot quickly leads to joint failure caused by dirt and moisture contamination. Being alert to these early warnings allows you to address problems before they result in a complete roadside breakdown.

Common Replacement Parts for the Mercedes Sprinter 3.5

When it comes to servicing and repairing the Mercedes Sprinter 3.5, certain components statistically require more attention than others. Our range caters directly to these demands, featuring a particular focus on propeller shafts where we supply 15 different versions to cover varying wheelbases and chassis configurations. We also supply complete driveshafts and individual joints for situations where replacing the entire assembly is unnecessary. Here is an overview of the most common components we offer for your Mercedes Sprinter 3.5:

  • Drive shaft for Mercedes Sprinter 3.5
  • Outer CV joint for Mercedes Sprinter 3.5
  • Inner CV joint for Mercedes Sprinter 3.5
  • Propeller shaft for Mercedes Sprinter 3.5

By keeping these components in stock for prompt dispatch across the EU, we ensure you can restore your van's roadworthiness with minimal downtime. Every part is strictly checked to meet the stringent demands expected of a Mercedes commercial vehicle.

Finding the Right Part for Your Mercedes Sprinter 3.5

Navigate directly to the relevant sub-category for your Mercedes Sprinter 3.5:

When troubleshooting a vehicle with several possible driveline faults, starting in the right category makes all the difference. Comparing the dedicated sections for the Mercedes Sprinter 3.5 makes it easier to pinpoint whether an issue lies with the drive shaft, CV joint or propeller shaft, taking you straight to the products that match your symptoms and exact fitment.

Finding the correct component for a Mercedes Sprinter 3.5 demands accuracy, as subtle variations in production month or chassis type can affect compatibility. To assist you, our store lets you filter directly by your vehicle's make, model and engine variant. Filtering by these specifications matches your van against our catalogue of 21 targeted products for your exact Sprinter 3.5 version. This is the most reliable way to ensure you receive a part with the correct overall length, spline count and mounting configuration. We always recommend using vehicle filtering to select the right part first time. If you require further assistance, our technical experts are available to guide you through the specifications. We know an incorrect part leads to unnecessary labour and downtime, which is why our fitment guarantee gives you complete peace of mind.

Why Choose CVJoint24?

Choosing CVJoint24 as your supplier for Mercedes Sprinter 3.5 driveline parts means choosing specialist expertise and dependability. As a dedicated Swedish specialist with our warehouse in Helsingborg, Sweden, we focus exclusively on drivelines and powertrains, giving us in-depth knowledge that general car parts stores often lack. We know your Mercedes Sprinter 3.5 is a crucial tool for your business or daily transport, and our aim is to deliver the market's best combination of premium quality and value. With our fitment guarantee, you can be confident that the components you order will fit your vehicle accurately. We also dispatch orders across the EU swiftly from our extensive inventory, helping you get your van back on the road without delay. We are proud to be the trusted partner for Mercedes owners who demand the correct part and knowledgeable service throughout every purchase.

Frequently asked questions about drivetrain parts for Mercedes Sprinter 3.5

How do I know if the propeller shaft on my Mercedes Sprinter 3.5 is worn?

The most common signs are chassis vibrations that increase with vehicle speed, or noises from the centre bearing. A visual inspection can also reveal play in the universal joints.

Can I replace just the CV joint, or do I need to replace the entire drive shaft on my Sprinter?

It depends on the extent of the damage. We supply both individual inner and outer CV joints as well as complete drive shafts for Mercedes Sprinter 3.5, giving you full flexibility when carrying out repairs.

What is included in a CV joint kit for Mercedes Sprinter 3.5?

Our kits typically include the CV joint itself, a model-specific CV boot, high-performance grease, circlips and the necessary clamps for a complete installation.

How does the fitment guarantee work at cvjoint24.com?

When you select your car's exact make, model and engine, we ensure that the parts displayed will fit your Mercedes Sprinter 3.5. If a part unexpectedly does not fit, we will help you exchange it for the correct one.

Why does my Mercedes Sprinter 3.5 vibrate under hard acceleration?

This is a classic symptom of a worn inner constant velocity joint. When the joint is placed under heavy load during acceleration, it produces vibrations that often disappear as soon as you ease off the throttle.

How quickly can I get my spare parts delivered?

We offer fast delivery across Europe for most of our 21 parts for Mercedes Sprinter 3.5, provided the item is in stock and the order is placed on time.