Mercedes Sprinter 3.5 T Tourer

Spare parts and drivetrain components for Mercedes Sprinter 3.5 T Tourer.

Products for Mercedes Sprinter 3.5 T Tourer

39 products
1 - 24 of 39
Item no.:626061
  • Position: Rear
  • Total length: 2,723 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6243694
  • Position: Rear
  • Total length: 3,388 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:6216882
  • Position: Rear
  • Total length: 3,377 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:6269956
  • Position: Rear
  • Total length: 2,757 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:622275
  • Position: Rear
  • Total length: 2,328 mm
Item no.:6293815
  • Position: Rear
  • Total length: 3,476 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:6250953
  • Position: Rear
  • Total length: 2,703 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6284042
  • Position: Rear
  • Total length: 2,813 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6229238
  • Position: Rear
  • Total length: 2,787 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6252942
  • Position: Rear
  • Total length: 2,777 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6260503
  • Position: Rear
  • Total length: 2,750 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6251680
  • Position: Rear
  • Total length: 2,681 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6246623
  • Position: Rear
  • Total length: 2,717 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6281303
  • Position: Rear
  • Total length: 3,449 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:147544
  • Position: Front left, Inner
  • Inner splines: 29
  • Seal diameter: 34 mm
  • Total length: 207 mm
  • Outer splines: 41
Item no.:243112
  • Position: Front right, Inner
  • Inner splines: 29
  • Seal diameter: 34 mm
  • Total length: 550 mm
  • Outer splines: 41
Item no.:143984
  • Position: Front left, Inner
  • Inner splines: 29
  • Seal diameter: 36,5 mm
  • Total length: 193 mm
  • Outer splines: 42
Item no.:244335
  • Position: Front right, Inner
  • Inner splines: 29
  • Splines gearbox side: 42
  • Total length: 537 mm
Item no.:0542644
  • Position: Front, Outer
  • Inner splines: 31
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Thread size: M16X1,5
Item no.:319189
  • Position: Front
  • Splines wheel side: 30
  • Total length: 690 mm
  • Joint diameter: 102 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:515276
  • Splines gearbox side: 26
  • Splines wheel side: 29
  • Total length: 890 mm
Item no.:0422786
  • Position: Inner
  • Inner splines: 28
  • Total length: 32 mm
  • Joint diameter: 108 mm
Showing 1–24 of 39 products

Drivetrain for Mercedes-Benz Sprinter 3.5 T Tourer

The Mercedes-Benz Sprinter 3.5 T Tourer is a workhorse renowned for its reliability and capability as both a passenger and transport vehicle. To maintain these qualities, the drivetrain must remain in peak condition. The drivetrain is the complex system that transfers engine power to the wheels, and on a vehicle of this size, these components endure substantial stress, especially under heavy loads or during frequent stop-start city driving. At CVJoint24, you will find a dedicated range of components tailored specifically for this model, ensuring your power delivery functions flawlessly under all conditions. We focus on supplying parts that meet or exceed original equipment specifications to give your vehicle the longest possible service life.

How the drivetrain is engineered on the Mercedes-Benz Sprinter 3.5 T Tourer

The drivetrain layout on a Mercedes-Benz Sprinter 3.5 T Tourer is robustly built to handle high torque outputs and sustained operation in demanding environments. Central to the system is the propeller shaft, which runs beneath the floorpan to deliver drive to the rear axle. Because the Tourer often features an extended wheelbase, the prop shaft is typically split into multiple sections supported by centre bearings and universal joints to suppress vibrations. At the front wheels, particularly on models with specific chassis designs, the outer CV joint plays a crucial role in enabling steering articulation whilst transmitting drive to the wheels. Understanding this setup is essential when selecting the correct spare parts for maintenance.

Common faults and symptoms

Several clear symptoms indicate that the drivetrain in your Mercedes-Benz Sprinter 3.5 T Tourer requires inspection. One of the most frequent signs is vibration felt through the vehicle body during acceleration or at specific road speeds, which typically points to imbalance or wear in the propeller shaft or its centre bearing. If you notice a clicking noise on full steering lock, this is a classic warning that an outer constant velocity joint is failing, often caused by a split CV boot. Other telltale signs include general drivetrain knocks from the underbody or grease leaking around the universal joints. Ignoring these warnings can result in costly consequential damage to the gearbox and differential, making early diagnosis vital.

Common replacement parts for Mercedes-Benz Sprinter 3.5 T Tourer

Within the drivetrain category for this model, the propeller shaft is the most widely stocked item in our range, with multiple variations available. This reflects the diverse wheelbase configurations and gearbox combinations fitted to the Sprinter 3.5 T Tourer. Alongside prop shafts, the outer CV joint is a critical wear item that frequently requires replacement due to road debris and mechanical fatigue. We supply outer CV joints engineered to handle the vehicle’s kerb weight and high torque. Replacing these parts promptly preserves driving refinement and ensures uninterrupted power transfer without the risk of sudden roadside breakdowns.

How to find the right part for your Mercedes-Benz Sprinter 3.5 T Tourer

Browse directly to the relevant component section for your Mercedes-Benz Sprinter 3.5 T Tourer:

On a vehicle with multiple drivetrain configurations, starting in the precise subcategory saves valuable time. By comparing the dedicated sections for the Mercedes-Benz Sprinter 3.5 T Tourer, it is straightforward to pinpoint whether you need a drive shaft, constant velocity joint or propeller shaft, directing you to the page that matches your symptoms and exact specification.

The most reliable method to ensure a precise fit is to filter our catalogue by your vehicle’s make, model and engine variant. Selecting these details ensures that every part displayed is technically verified for your specific Mercedes-Benz Sprinter 3.5 T Tourer, eliminating guesswork and the hassle of returns.

Why shop at CVJoint24

CVJoint24 is the international store of a Swedish driveline specialist, focusing exclusively on power transmission components with central warehouse dispatch from Helsingborg, Sweden. We understand the exacting technical requirements of the Mercedes-Benz Sprinter 3.5 T Tourer and stock only parts offering guaranteed fitment and long-term durability. Our specialist focus gives you access to a depth of range that general motor factors rarely match. With prompt shipping across the EU, intuitive vehicle selection tools and customer support backed by genuine technical expertise, CVJoint24 is your dependable partner for restoring your Sprinter’s drivetrain to optimal working order.

Frequently Asked Questions about Mercedes-Benz Sprinter 3.5 T Tourer - Drivetrain & Spare Parts

How do I know which propeller shaft fits my Sprinter 3.5 T Tourer?

Since there are 16 different variants based on wheelbase and gearbox, the most reliable way is to select your vehicle's exact make, model and engine to find the right part.

What are the symptoms of a worn outer CV joint on this model?

The most common symptom is a rhythmic clicking noise when turning sharply, which is often caused by dirt entering the joint through a split CV boot.

Why does my Mercedes-Benz Sprinter vibrate under acceleration?

Vibrations through the chassis are often caused by an imbalanced propeller shaft or a worn centre bearing. It is important to inspect the prop shaft's universal joints and mountings.

Are your drivetrain parts equivalent to original equipment (OE)?

Yes, as specialists we only offer high-quality parts with an exact fit, often sourced from the very manufacturers that supply the automotive industry.

How many drivetrain products do you stock for the Sprinter 3.5 T Tourer?

We currently stock 18 matching items, including 16 propeller shafts and 2 outer CV joints, specifically selected for this model.

Can I replace just a section of the propeller shaft?

That depends on the design, but it is often most cost-effective and safest to replace the complete assembly to ensure correct balance and operation.