Mercedes Sprinter 3 T

Spare parts and drivetrain components for the Mercedes Sprinter 3 T.

Products for Mercedes Sprinter 3 T

139 products
97 - 120 of 139
Item no.:6255392
  • Position: Rear
  • Total length: 2,703 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6275719
  • Position: Rear
  • Total length: 2,813 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6282049
  • Position: Rear
  • Total length: 2,787 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6277931
  • Position: Rear
  • Total length: 2,777 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6279007
  • Position: Rear
  • Total length: 2,750 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6201173
  • Position: Rear
  • Total length: 2,681 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:6247253
  • Position: Rear
  • Total length: 2,717 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:0866677
  • Inner diameter: 47 mm
  • Bearing thickness: 21 mm
  • Hole spacing c/c: 194 mm
  • Height: 73 mm
Item no.:0174203
  • Splines gearbox side: 26
  • Splines wheel side: 29
  • Total length: 940 mm
Item no.:626940
  • Total length: 2,787 mm
  • Outer diameter 1: 67 mm
  • Bolt circle diameter 1: 120 mm
  • Outer diameter 2: 67 mm
  • Bolt circle diameter 2: 112 mm
Item no.:625510
  • Position: Rear
  • Total length: 2,702 mm
Item no.:0262061
  • Total length: 88 mm
  • Diameter: 27 mm
Item no.:353769
  • Position: Front, Outer
  • Inner splines: 31
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Thread size: M16X1,5
Item no.:697129
  • Position: Rear
Item no.:0589008
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 26
  • Outer diameter: 98 mm
  • ABS teeth: 54
Item no.:0513357
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 26
  • Outer diameter: 98 mm
Item no.:620725
  • Position: Rear
  • Total length: 2,745 mm
Item no.:0455772
  • Position: Inner
  • Inner splines: 28
  • Splines gearbox side: 28
  • Total length: 32 mm
Item no.:0497263
  • Position: Inner
  • Inner splines: 28
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:7317781
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 62 mm
  • Outer splines: 26
  • ABS teeth: 54
Item no.:318876
  • Position: Front
  • Splines wheel side: 26
  • Total length: 628 mm
  • Joint diameter: 98 mm
  • ABS teeth: 54
Item no.:146175
  • Position: Front left, Inner
  • Inner splines: 29
  • Seal diameter: 64,5 mm
  • Total length: 193 mm
  • Outer splines: 42
Item no.:249637
  • Position: Front right, Inner
  • Inner splines: 29
  • Seal diameter: 38 mm
  • Total length: 550,5 mm
  • Outer splines: 41
Item no.:148391
  • Position: Front left, Inner
  • Inner splines: 29
  • Seal diameter: 44 mm
  • Total length: 208 mm
  • Outer splines: 41
Showing 97–120 of 139 products

Drivetrain for Mercedes Benz Sprinter 3 T

The Mercedes Benz Sprinter 3 T is an iconic commercial van renowned for its durability and immense capability in professional transport. Maintaining these qualities requires a drivetrain in peak condition. The power transmission is the heart of the vehicle, and at CVJoint24 we have assembled 114 specific components to ensure your van keeps running without costly downtime. As specialists in the drivetrain, we understand the unique demands placed on the Mercedes Benz Sprinter 3 T, where heavy payloads and high mileages place extreme demands on materials and manufacturing precision. Our range covers everything from complete propeller shafts to small yet crucial ABS rings, all selected to meet or exceed original specifications for this specific chassis. By choosing the right parts, you extend the working life of your Sprinter and ensure it remains the dependable workhorse it was engineered to be.

How the drivetrain is engineered on the Mercedes Benz Sprinter 3 T

The drivetrain layout on the Mercedes Benz Sprinter 3 T is technically optimised to cope with high torque and fluctuating payload weights. As a rear-wheel-drive or in some cases four-wheel-drive commercial vehicle, it relies on a robust prop shaft running along the underside of the vehicle. This shaft is frequently split into multiple sections with integrated centre bearings to minimise vibrations and bridge the long wheelbase. At the wheels, we find drive shafts and CV joints that transfer power from the gearbox or differential directly to the road surface. Because the Sprinter 3 T comes in a wide variety of body styles, from panel vans to dropside pickups, the variation in components is vast. We therefore maintain an exceptionally broad stock of Mercedes Benz Sprinter 3 T propeller shafts to cover every conceivable setup, regardless of engine variant or specific wheelbase.

Common faults and symptoms

Identifying drivetrain issues early can save substantial repair costs and prevent unscheduled breakdowns. On the Mercedes Benz Sprinter 3 T, vibrations resonating through the chassis during driving are one of the most frequent indicators of wear, commonly linked to the propeller shaft, its universal joints, or the centre bearing. If you notice a distinct clicking noise on sharp turns, it is usually an outer CV joint on your Mercedes Benz Sprinter 3 T failing due to road grime ingress or grease loss. Another frequent symptom is an illuminated ABS warning light or an unexpected pulsing through the brake pedal during low-speed stops. This is often caused by a cracked or heavily corroded ABS ring on the Mercedes Benz Sprinter 3 T, which disrupts the wheel speed sensor signal. By staying alert to these early warnings, you can resolve faults before they cause more extensive mechanical failure.

Common parts to replace on the Mercedes Benz Sprinter 3 T

Based on our extensive order data and customer demand, certain components require replacement more frequently on this model. Here are the key categories for your vehicle, kept in stock for fast dispatch:

  • Propeller shaft: With numerous configurations in our warehouse, this is the central component for power transmission on the Sprinter 3 T.
  • Drive shaft: We stock 10 distinct types of driveshaft for the Mercedes Benz Sprinter 3 T to guarantee the correct fitment for your specific model year and drive configuration.
  • CV joints: The outer CV joint works through severe steering angles and endures continuous road spray, making it a regular wear item that calls for periodic CV boot inspections.
  • ABS rings: A vital safety component that frequently requires replacement following corrosion from harsh European road conditions.

These components are essential to maintaining your vehicle's road manners and overall safety, particularly when your van carries heavy loads or operates in daily commercial use where downtime is simply not an option.

How to find the right part for your Mercedes Benz Sprinter 3 T

Navigate directly to the appropriate category for your Mercedes Benz Sprinter 3 T:

On a vehicle with several possible drivetrain faults, targeting the right section immediately is essential. Comparing specific component groups for the Mercedes Benz Sprinter 3 T makes it straightforward to distinguish between faults in a drive shaft, a constant velocity joint, or a prop shaft, leading you directly to the parts matching your symptoms and specifications.

Given the wide array of body styles and configurations for the Mercedes Benz Sprinter 3 T, pinpointing the exact spare part is essential. Differences in chassis number, wheelbase length, and gearbox variant directly determine which component fits your van. At cvjoint24.com, you can narrow down our catalogue effortlessly by selecting your car's make, model, and engine variant to display only technically suitable components. We also advise checking physical dimensions or original equipment (OEM) reference numbers if you are uncertain, especially when replacing propeller shafts where overall length is a decisive factor. Our technical expertise and extensive database ensure you get the right part on your first order, saving both time and money in the workshop.

Why shop with cvjoint24.com

CVJoint24 is far more than an ordinary online parts retailer; we are the international shop of a Swedish driveline specialist with our central warehouse in Helsingborg, Sweden, dedicated entirely to driveline and power transmission components. When you purchase parts for your Mercedes Benz Sprinter 3 T from us, you benefit from specialist expertise that general car parts stores cannot match. We combine high component quality with an in-depth understanding of your vehicle's mechanical design and the working demands transport operators face every day. Our goal is to provide superior fitment accuracy and lasting durability, which is paramount for vehicles expected to perform reliably day after day. With fast shipping across the EU, dependable e-commerce, and a range tailored to commercial fleets, we are the trusted choice for DIY mechanics and professional garages looking for reliable specialist knowledge at the right price.

Frequently Asked Questions about Mercedes Benz Sprinter 3 T – Drivetrain & Spare Parts

How do I know which propeller shaft fits my Mercedes Benz Sprinter 3 T?

The easiest way is to select your vehicle make, model and engine variant in our search filter. As the Sprinter 3 T is available with various wheelbases and gearboxes, it is also advisable to check the overall length of your current shaft.

What are the most common signs of a failing CV joint on a Sprinter?

A clear sign is a clicking or knocking noise heard when turning sharply at low speeds. Vibrations during acceleration can also indicate an issue with the inner CV joint.

Why does my Mercedes Sprinter 3 T vibrate at certain speeds?

Vibrations through the chassis are often caused by an unbalanced propeller shaft, worn universal joints, or a prop shaft centre bearing that has started to fail. It is important to inspect these parts promptly.

Can I replace just the ABS ring, or do I need to buy a complete drive shaft?

On the Mercedes Benz Sprinter 3 T, you can usually replace just the ABS ring if the drive shaft itself is otherwise in good condition, which is a significantly more cost-effective solution.

How many drive shafts does my Mercedes Benz Sprinter 3 T have?

This depends on whether your vehicle is rear-wheel drive or four-wheel drive (4MATIC). A rear-wheel-drive model has two rear drive shafts, whereas an all-wheel-drive version also has front driveshafts.

Are your drivetrain parts equivalent to original Mercedes parts?

Yes, we only supply premium-quality components manufactured to meet or exceed the original technical specifications for the Mercedes Benz Sprinter 3 T.

What happens if I drive with a split CV boot?

If the CV boot is split, lubricating grease escapes whilst road dirt and moisture penetrate the joint. This quickly leads to accelerated wear and, in the worst case, complete failure of the CV joint.