Mini Crossover

Welcome to your specialist for Mini Crossover driveline components. We provide an extensive selection of premium parts to guarantee seamless, dependable power delivery. Whether you...

Products for Mini Crossover

9 products
1 - 9 of 9
Item no.:114911
  • Position: Front left
  • Splines gearbox side: 34
  • Splines wheel side: 26
  • Total length: 622 mm
  • Diameter 1: 87 mm
Item no.:111647
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 635 mm
  • Diameter 1: 82 mm
Item no.:215732
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 904 mm
Item no.:244072
  • Position: Front right, Inner
  • Inner splines: 24
  • Splines gearbox side: 35
  • Total length: 130 mm
Item no.:149534
  • Position: Front left, Inner
  • Inner splines: 24
  • Splines gearbox side: 26
  • Total length: 158 mm
Item no.:242127
  • Position: Front right, Inner
  • Inner splines: 35
  • Total length: 121 mm
Item no.:145221
  • Position: Front left, Inner
  • Inner splines: 23
  • Splines gearbox side: 34
  • Seal diameter: 23 mm
  • Total length: 153 mm
Item no.:157087
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 26
  • Thread size: M22 x 1,5
Item no.:111309
  • Position: Front left
  • Splines gearbox side: 33
  • Splines wheel side: 26
  • Total length: 639 mm

Drivetrain for Mini Crossover

Maintaining the drivetrain on a Mini Crossover is vital to preserve the car's distinctive handling and safety. As a Swedish driveline specialist, we understand the exact demands placed on these components. The drivetrain transfers engine power to the wheels, and on a Mini Crossover these parts endure substantial loads, especially during spirited driving or on rough surfaces. Our range is meticulously assembled to supply parts that meet or exceed original equipment standards, giving you a lasting solution for your car.

We provide in-depth category expertise to guide you through technical specifications with ease. By prioritising quality and exact fitment, we ensure every component, from the smallest CV boot to a complete drive shaft, works seamlessly alongside the rest of your vehicle. When you source parts from us, you receive components engineered to endure demanding European driving conditions and the daily stresses faced by a Mini Crossover. Our mission is to make finding the right parts straightforward, getting your car back on the road performing at its best.

How the Mini Crossover drivetrain works

The drivetrain in a Mini Crossover is an intricate assembly engineered to blend agility with durable power transmission. The layout uses a transverse engine delivering output through a gearbox directly to the drive shafts. Front-wheel-drive models rely on front drive shafts and their joints, whereas all-wheel-drive variants incorporate an extended setup transferring drive to the rear wheels as well. Every drive shaft for the Mini Crossover is fitted with two joints: an inner joint located at the gearbox and an outer joint at the wheel hub.

The outer CV joint accommodates sharp steering angles, allowing the front wheels to turn smoothly while continuously propelling the car. The inner CV joint primarily absorbs the horizontal plunge movements created as the suspension travels up and down. This balance of articulation and plunge travel is vital to eliminate driveline vibration and deliver steady power delivery. On a Mini Crossover, close engineering tolerances are key to safeguarding the sharp, go-kart steering feel typical of the marque. Understanding this arrangement makes diagnosing and pinpointing faulty components much simpler.

Common faults and symptoms

Several clear indicators suggest driveline wear on your Mini Crossover. One classic symptom of a worn outer CV joint is a rhythmic clicking or knocking sound on full steering lock while accelerating. This knocking is frequently caused by grease escaping through a split CV boot, which allows road grime in to cause severe mechanical wear across the internal steel balls and tracks.

Conversely, if you experience noticeable cabin vibrations under acceleration—notably at motorway speeds—a worn inner CV joint is often the culprit. These vibrations are sometimes felt through the steering wheel, though they frequently reverberate through the floorpan and chassis. Addressing these symptoms promptly is vital, as a severely failed constant velocity joint can break completely, resulting in total loss of drive. Inspecting your drive shaft boots routinely remains the best preventative measure, keeping vital lubricating grease in and moisture out.

Common parts to replace on the Mini Crossover

Our dedicated Mini Crossover range covers an extensive selection of driveline components. We supply drive shafts, outer CV joints and inner CV joints tailored specifically for this platform. Replacing the complete driveshaft is often the quickest and most reliable fix for extensive wear, as you receive factory-assembled inner and outer joints alongside brand new CV boots. This eliminates guesswork and ensures your entire assembly returns to optimal condition.

If you prefer replacing individual components, the outer constant velocity joint is the most frequent wear item. Because it manages wide steering angles, it undergoes heavier wear than the inner unit. Inner joints, which we also supply across multiple variants, need less frequent attention but are essential for eradicating driveline shudders. In addition to replacement joints, our CV joint boot kits are essential preventative maintenance parts. Replacing a split boot early saves substantial money by preserving the original joint inside. We also supply all necessary circlips, snap rings and high-pressure grease to ensure a trouble-free installation.

How to find the right part for your Mini Crossover

Navigate directly to the appropriate driveline category for your Mini Crossover:

When diagnosing drivetrain issues, pinpointing the correct subcategory straight away saves time. Comparing specific sections for the Mini Crossover helps distinguish between faults in the drive shaft, CV joints or propeller shaft, directing you to the exact match for your symptoms.

Our customer support team is always on hand to help with technical queries if you are unsure which component matches your setup. We possess extensive technical data for the Mini Crossover and are glad to verify fitment before you place your order.

Why shop with CVJoint24

Choosing CVJoint24 means partnering with a specialist passionate about All car makes and power transmission systems. We are a Swedish specialist shop dispatching across Europe from our central warehouse, prioritising uncompromising quality and customer service. Thanks to our accurate fitment guarantee, you can order with absolute confidence that every component will fit your Mini Crossover seamlessly. We understand you need parts promptly, which is why we maintain fast dispatch across our product catalogue so your vehicle returns to the road without delay.

Our commitment to supplying the correct part first time relies on continuously updated, precise vehicle application databases. Combining a wide inventory with deep technical know-how, we are the trusted partner for both home enthusiasts and professional garages. Sourcing your parts from us guarantees a durable, high-calibre component engineered to go the distance. Select the right part today and discover the advantages of buying from a true driveline specialist.

Frequently asked questions about drivetrain parts for Mini Crossover

How do I know if my Mini Crossover needs a new outer CV joint?

The most common sign is a clicking noise from the front axle when turning sharply under acceleration. If the noise disappears when driving straight ahead, it is almost certainly the outer CV joint that is worn.

Can I replace just the CV boot on my Mini Crossover?

Yes, if you detect a split in the boot early before dirt has entered the joint, you can replace just the CV boot. This is a very cost-effective preventative measure.

Why does my Mini Crossover vibrate under acceleration?

Vibrations under acceleration, especially at speeds between 50 and 90 km/h, are often caused by wear in the inner CV joint. This creates an imbalance in the drive shaft that travels through the vehicle's chassis.

Do all drive shafts fit every Mini Crossover model?

No, drive shafts differ depending on whether the car has a manual or automatic gearbox, as well as which engine it is fitted with. Always select your vehicle's make, model and engine to find the correct version.

What is included when I buy a CV joint for my Mini Crossover?

Our CV joint kits are supplied complete with the joint itself, a model-specific CV boot, high-grade grease, circlips and the necessary clamps for a complete installation.

How quickly can I receive parts for my Mini Crossover?

We offer fast delivery for most of our in-stock items, meaning you normally receive your parts shortly after placing your order.