Mitsubishi Eclipse Cross

Spare parts and drivetrain components for Mitsubishi Eclipse Cross.

Products for Mitsubishi Eclipse Cross

25 products
25 - 25 of 25
Item no.:447338
  • Position: Rear, Inner
  • Inner splines: 26
  • Seal diameter: 35 mm
  • Total length: 160 mm
  • Joint diameter: 64 mm
Showing 25–25 of 25 products

Drivetrain for Mitsubishi Eclipse Cross

The Mitsubishi Eclipse Cross is a modern SUV combining sharp styling with technical sophistication, which places demanding requirements on every single component in the vehicle's power transmission. The drivetrain is central to the car's ability to deliver power from the engine to the wheels, and for a model such as the Eclipse Cross, reliability and precision are absolutely vital. As Swedish driveline specialists in All car makes, we understand the distinct engineering challenges these vehicles encounter, whether navigating dense urban traffic or coping with tough European winter roads. Maintaining your drivetrain with the correct spare parts is not just about performance; it is also essential for long-term economy and the safety of you and your passengers.

Our range for the Mitsubishi Eclipse Cross is carefully curated to meet or exceed original equipment specifications. We know that every detail matters, from the metallurgy in a CV joint to the precise machining of a drive shaft's splines. By choosing components engineered specifically for this model, you ensure that the car's original handling characteristics are preserved and unnecessary wear on surrounding components is kept to a minimum. We strive to offer the most complete selection of power transmission solutions for your car.

How the drivetrain is engineered on the Mitsubishi Eclipse Cross

The drivetrain layout in a Mitsubishi Eclipse Cross is a sophisticated design that varies depending on whether the car is front-wheel drive or fitted with Mitsubishi's advanced Super All-Wheel Control (S-AWC) four-wheel-drive system. This system is engineered to distribute torque dynamically between the wheels to maximise grip and road holding. Central to this setup are the drive shafts, which serve as the final mechanical link delivering power to the tarmac. These shafts must handle substantial articulation angles and constant suspension travel while transferring torque smoothly and without loss.

On all-wheel-drive variants, further complexity is introduced with a propeller shaft transferring torque to the rear differential, which then distributes drive to the rear drive shafts. Every component, from the gearbox output shaft to the wheel hub mounting, forms part of an integrated driveline. The lubrication inside the constant velocity joints is sealed and protected by flexible CV boots, which are essential to the assembly's service life. A healthy drivetrain in an Eclipse Cross delivers quiet running and vibration-free acceleration, achieved when all rotating parts work in seamless mechanical harmony.

Common faults and symptoms

There are several clear warning signs indicating that drivetrain components on your Mitsubishi Eclipse Cross are worn or damaged. One of the most typical symptoms is a rhythmic clicking or knocking noise when taking sharp corners at low speeds. This almost invariably points to a worn outer CV joint that requires replacement. If you instead notice vibrations through the steering wheel or vehicle chassis during acceleration, the issue is often traceable to worn inner CV joints or an out-of-balance drive shaft. These vibrations can be subtle at first but tend to deteriorate steadily over time.

Another vital symptom to watch for is grease splattered around the inner rim or wheel arch. This is typically caused by a split or torn CV boot. Once the boot fails, the lubricating grease escapes while grit, moisture and road salt penetrate the joint. This accelerates mechanical wear drastically and can lead to sudden joint failure if neglected. By tackling these early warning signs promptly, you can prevent far more extensive and costly repairs later, including collateral damage to the gearbox or wheel bearing assemblies.

Common replacement parts for Mitsubishi Eclipse Cross

When maintaining the power transmission, certain parts naturally suffer greater wear and tear than others. On the Mitsubishi Eclipse Cross, the drive shaft is a vital assembly that regularly requires inspection, particularly on cars driven frequently across varied surfaces or in demanding driving conditions. We supply both complete driveshafts and specific repair kits to suit your requirements. Installing a complete drive shaft on your Mitsubishi Eclipse Cross is often the most time-efficient option for major repairs, as it provides fresh inner and outer CV joints alongside brand-new boots in one balanced unit.

Here are the key component categories for your vehicle:

  • Drive shafts for Mitsubishi Eclipse Cross – Complete assemblies for both offside and nearside.
  • CV joint kits – For repairing individual joints when the shaft itself remains undamaged.
  • CV boot kits – Vital preventative maintenance to protect joints from contamination.

The right repair route depends on the extent of the wear. If a split boot is identified early enough, fitting a replacement boot kit with fresh grease may suffice. However, if the joint has already started clicking or developed play, replacing the individual joint or the complete drive shaft is necessary to restore safety and refined driving comfort.

Finding the correct parts for your Mitsubishi Eclipse Cross

Navigate to the right subcategory for your Mitsubishi Eclipse Cross:

On a vehicle with various drivetrain configurations, selecting the correct subcategory from the outset saves valuable time. By comparing the exact component sections for the Mitsubishi Eclipse Cross, it is straightforward to pinpoint whether your issue lies with a drive shaft, CV joint or propeller shaft, taking you directly to the parts that match your symptoms and technical specifications.

Pinpointing the exact replacement part for a modern car like the Mitsubishi Eclipse Cross can seem involved due to differing engine options, gearbox variants and drivetrain setups. Subtle yet crucial differences often exist in overall length, spline tooth counts and ABS reluctor ring designs between model years. To make your search as straightforward and accurate as possible, our web shop allows you to easily filter by your vehicle's make, model and engine variant, showing you only the parts engineered specifically for your car.

We always suggest confirming your vehicle details as the initial step. Should multiple technical variants exist for your exact model, we provide detailed technical measurements and drawings to ensure you order with complete confidence. Our database is regularly updated for maximum accuracy. If you are ever unsure which drive shaft your Mitsubishi Eclipse Cross requires, our customer service team is on hand with expert driveline guidance to help you find the perfect fit.

Why shop with CVJoint24

CVJoint24 is not just another car parts website; we are dedicated driveline and power transmission specialists operating as the international shop of a Swedish specialist, dispatching orders across the EU from our warehouse in Helsingborg, Sweden. Our focused expertise means we possess an in-depth understanding of the parts we supply, a level of technical insight general car parts retailers rarely match. We prioritise OE-standard quality and precise fitment, which is crucial when dealing with hard-working components such as drive shafts and CV joints. When you order from us, you get components engineered to endure demanding European road and weather conditions.

We understand how critical it is to receive the correct parts promptly. That is why we provide streamlined logistics and an intuitive online catalogue that makes locating your components straightforward. Our comprehensive inventory for the Mitsubishi Eclipse Cross ensures that the parts you require are almost always in stock and ready to ship. Combining dedicated technical know-how, precise vehicle matching and a genuine commitment to quality, CVJoint24 is the trusted choice for professional workshops and DIY mechanics alike.

Frequently asked questions about drivetrain parts for Mitsubishi Eclipse Cross

How do I know if my Mitsubishi Eclipse Cross needs a new drive shaft?

The most common signs are clicking noises when cornering, vibrations under acceleration, or visible damage and grease leaks from the drive shaft boots.

Do all drive shafts fit all Eclipse Cross models?

No, there are differences depending on whether the car is front-wheel drive or four-wheel drive (S-AWC), as well as its engine and gearbox. Always select your specific model and engine to find the right part.

What is the difference between an inner and an outer CV joint?

The outer CV joint sits closest to the wheel and allows for steering angles, while the inner joint sits closest to the gearbox and accommodates suspension movement. They often produce different symptoms when worn.

Can I replace just the CV boot instead of the entire drive shaft?

Yes, if you catch the damage to the boot early before dirt and moisture have damaged the joint itself, replacing just the CV boot and repacking it with fresh grease may be sufficient.

Why is it important to select the exact vehicle details when searching?

This ensures you receive parts with the correct spline count, precise length and correct fitment, which vary between different technical specifications of the Mitsubishi Eclipse Cross.

How does four-wheel drive affect drivetrain wear?

Four-wheel drive distributes power across more components, which means both the front and rear drive shafts as well as the propeller shaft should be checked regularly for wear.