Mitsubishi L 300

Welcome to CVJoint24, your Swedish power transmission specialist. For your Mitsubishi L 300, we have assembled an extensive range of high-quality components engineered to keep your...

Products for Mitsubishi L 300

19 products
1 - 19 of 19
Item no.:320741
  • Total length: 64 mm
  • Diameter: 25 mm
Item no.:622374
  • Total length: 77 mm
  • Diameter: 25 mm
Item no.:0547736
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 56 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Item no.:243780
  • Position: Inner
  • Inner splines: 25
Item no.:145108
  • Position: Inner
  • Total length: 178 mm
  • ABS teeth: 25
Item no.:146395
  • Position: Inner
  • Inner splines: 25
  • Seal diameter: 32 mm
  • Total length: 170,5 mm
  • Joint diameter: 86 mm
Item no.:0621331
  • Total length: 102 mm
Item no.:325523
  • Total length: 64 mm
  • Diameter: 25 mm
Item no.:624452
  • Total length: 77 mm
  • Diameter: 25 mm
Item no.:149885
  • Position: Inner
  • Total length: 178 mm
  • ABS teeth: 25
Item no.:146954
  • Position: Inner
  • Inner splines: 25
  • Seal diameter: 32 mm
  • Total length: 170,5 mm
  • Joint diameter: 86 mm
Item no.:329345
  • Total length: 64 mm
  • Diameter: 25 mm
Item no.:627595
  • Total length: 77 mm
  • Diameter: 25 mm
Item no.:148259
  • Position: Inner
  • Total length: 178 mm
  • ABS teeth: 25
Item no.:144318
  • Position: Inner
  • Inner splines: 25
  • Seal diameter: 32 mm
  • Total length: 170,5 mm
  • Joint diameter: 86 mm
Item no.:320988
  • Total length: 64 mm
  • Diameter: 25 mm
Item no.:627089
  • Total length: 77 mm
  • Diameter: 25 mm

Drivetrain for Mitsubishi L 300

The Mitsubishi L 300 is an iconic commercial vehicle that has served both businesses and private owners for decades with its reliability and versatility. Keeping this dependable workhorse on the road requires a drivetrain in peak condition. The drivetrain is the car’s mechanical heart when it comes to converting engine energy into movement on the road. As a Swedish driveline specialist, we at CVJoint24 are dedicated to providing a comprehensive range specifically for the Mitsubishi L 300. We understand the unique challenges owners face, from sourcing parts for older model years to making sure that components can handle the strain of heavy payloads. Choosing the right spare parts from an expert ensures not only vehicle performance but also driving safety. Every item in our range is carefully selected to meet or exceed original equipment specifications, giving you a durable solution for the future. Whether you are restoring a classic L 300 or maintaining a daily workhorse, we are your partner for everything related to power transmission.

How the Mitsubishi L 300 drivetrain is engineered

The drivetrain architecture of the Mitsubishi L 300 is an excellent example of functional engineering. Depending on whether your model is rear-wheel drive or four-wheel drive, the configuration differs. Essentially, power is transferred from the longitudinally mounted engine through the gearbox to the wheels. For rear-wheel-drive models, the propeller shaft plays a central role; it runs along the underside of the vehicle and must be perfectly balanced to prevent unwanted vibrations. At the rear axle, power is distributed via the differential to the drive shafts. On 4WD versions, the layout is more complex, featuring a transfer case that directs power to the front axle via front drive shafts and CV joints. These components work under constant pressure and in exposed conditions. The constant velocity joints, both inner and outer, allow the wheels to move with the suspension and steer while transferring power smoothly. Understanding this interaction is key to appreciating why the quality of every single component, such as bearings and joints, is crucial to the driving experience and the vehicle's service life.

Common faults and symptoms

Identifying drivetrain faults on a Mitsubishi L 300 early can save you considerable time and money. One of the most typical signs of wear is a rhythmic clicking noise when cornering sharply, which almost always points to a worn outer CV joint on your Mitsubishi L 300. If vibrations instead spread through the body shell under acceleration, you should check the inner CV joint of the Mitsubishi L 300 or inspect the prop shaft for lost balance weights. Another common symptom is a whining or grinding noise from the underbody, which often indicates that a centre bearing or universal joint is beginning to fail. You should also inspect the CV boots regularly; a split boot allows road dirt and water to penetrate while vital grease is flung out. This leads to accelerated wear of the CV joint. If you notice snatching or clunking when pulling away or changing gear, play in the propeller shaft splines or universal joints may be the cause. Paying attention to these early warning signs allows you to rectify problems before they result in a complete breakdown at the roadside.

Common parts to replace on the Mitsubishi L 300

When maintaining the Mitsubishi L 300, certain components experience more wear than others due to the vehicle's construction and demanding workloads. Here is a detailed overview of the parts our customers replace most frequently to preserve reliability:

  • Outer CV joint for Mitsubishi L 300: This part copes with the greatest articulation angles and is most exposed to road grime at the wheel hub.
  • Inner CV joint for Mitsubishi L 300: Sits closer to the gearbox or differential and accommodates the axial movement of the drive shaft during travel.
  • Propeller shaft for Mitsubishi L 300: A vital component for rear power transmission, where U-joints and the centre bearing are the primary wear points.
  • CV boots for Mitsubishi L 300: The most cost-effective yet crucial protection for your expensive CV joints against moisture and contamination.

In addition, it is frequently necessary to check the ABS rings if the model is equipped with them, as corrosion can cause them to crack and send incorrect wheel-speed signals to the brake system. Having access to a comprehensive catalogue of these components is vital for getting the vehicle back into service quickly. We stock these car parts to ensure you always find what you need for your particular L 300 model, whether it is a standard bus or a panel van.

Find the right part for your Mitsubishi L 300

Navigate directly to the relevant component section for your Mitsubishi L 300:

On a vehicle with several potential drivetrain issues, starting in the right category saves time. By comparing the exact component sections for the Mitsubishi L 300, it is easier to tell whether a problem lies with a drive shaft, CV joint or propeller shaft, allowing you to proceed to the page that best matches your symptoms and fitment.

Navigating the variety of spare parts can be demanding, particularly for a model like the Mitsubishi L 300, which has been produced across many global configurations over the years. To help you select correctly right away, you can easily filter our range by your vehicle’s exact make, model and engine variant. When you select your vehicle details in our search tool, we match them against our extensive database to present the components engineered specifically for your technical setup. However, it is worth bearing in mind that certain vehicles may have undergone modifications over time, or multiple technical options might exist for the same model year. We therefore always recommend checking dimensions, spline counts and visual characteristics against your old component before fitting. Our customer support team consists of driveline specialists ready to assist if you have any questions regarding your choice of prop shaft or specific CV joint. With our support, you minimise the risk of ordering incorrect parts and can feel confident that your new items will fit accurately. We strive to provide all the practical guidance you need to make an informed choice.

Why shop at CVJoint24

Choosing CVJoint24 as your supplier of drivetrain components for the Mitsubishi L 300 means choosing confidence, technical expertise and dependable quality. We are not just another general retailer; we are a dedicated specialist passionate about power transmission and vehicle drivetrains. Our focus on a deep catalogue in driveline parts allows us to stock components that generic car-parts sellers often do not carry. We back our products with a fitment guarantee, ensuring full confidence that the parts recommended for your vehicle configuration fit properly. Furthermore, we understand the importance of prompt delivery, particularly for commercial vehicles like the L 300 where downtime translates directly into lost hours or income. We dispatch efficiently across the European Union from our central warehouse in Helsingborg, Sweden, keeping transit times short. Shopping with us gives you access to specialised knowledge and products engineered to endure demanding European road conditions. We are proud to be the trusted specialist for vehicle owners who demand durable parts for their drivetrain. Always the correct part, always the highest quality – that is our commitment to you at CVJoint24.

Frequently asked questions about drivetrain parts for Mitsubishi L 300

How do I know if my Mitsubishi L 300 needs a new outer CV joint?

The most common sign is a rhythmic clicking noise heard when turning sharply at low speed. If the noise disappears when driving straight ahead, it is a clear indication that the outer CV joint is worn.

Can I replace just the boot on my Mitsubishi L 300?

Yes, if you detect damage to the CV boot early before dirt has penetrated into the CV joint, you can replace just the boot. If the joint has already started making noises, however, the entire joint must be replaced.

What vibrations indicate a fault with the propeller shaft?

Vibrations that increase in intensity with road speed, rather than engine revs, often point to an imbalance in the propeller shaft or worn universal joints and centre bearings.

Do all CV joints fit every model year of the Mitsubishi L 300?

No, there are variations in the number of splines (teeth) and physical dimensions between different model years and engine variants. Always select your make, model and engine to find the correct part.

What is included in a CV joint kit for the Mitsubishi L 300 from CVJoint24?

Our kits are complete and usually include the CV joint itself, a vehicle-specific CV boot, specialised grease, circlips and the necessary clamps for proper installation.

How quickly do you deliver parts for the Mitsubishi L 300?

We offer fast delivery on most of our in-stock items, minimising the downtime for your Mitsubishi L 300 in the garage.