Nissan Almera II Hatchback

Spare parts and drivetrain components for the Nissan Almera II Hatchback.

Products for Nissan Almera II Hatchback

73 products
1 - 24 of 73
Item no.:0354114
  • ABS teeth: 44
  • Inner diameter: 68 mm
  • Outer diameter: 78 mm
  • Width: 9,5 mm
Item no.:0571307
  • Position: Outer
  • Inner splines: 35
  • Seal diameter: 55 mm
  • Outer splines: 27
  • ABS teeth: 42
Item no.:0549443
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 55 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:342778
  • Position: Inner
  • Inner splines: 23
  • Seal diameter: 40 mm
  • Total length: 152,1 mm
  • Joint diameter: 82 mm
Item no.:242653
  • Position: Inner
  • Inner splines: 23
  • Seal diameter: 40 mm
  • Total length: 170 mm
  • Joint diameter: 86 mm
Item no.:1134673
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 623 mm
  • ABS teeth: 42
Item no.:2168493
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 927 mm
  • ABS teeth: 42
Item no.:335363
  • ABS teeth: 44
  • Inner diameter: 68 mm
  • Outer diameter: 78 mm
  • Width: 9,5 mm
Item no.:132976
  • ABS teeth: 42
  • Inner diameter: 68 mm
  • Outer diameter: 78 mm
  • Width: 10 mm
Item no.:0697966
  • Outer diameter: 23 mm
  • Diameter: 86 mm
Item no.:0331874
  • Position: Front
  • ABS teeth: 42
  • Inner diameter: 68 mm
  • Outer diameter: 78 mm
  • Width: 10 mm
Item no.:0536404
  • Position: Outer
  • Inner splines: 21
  • Seal diameter: 55 mm
  • Outer splines: 25
  • ABS teeth: 44
Item no.:0509361
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Seal diameter: 55 mm
  • ABS teeth: 42
Item no.:145358
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 40 mm
  • Total length: 160,5 mm
  • Joint diameter: 76 mm
Item no.:0544543
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 55 mm
  • Outer splines: 25
  • ABS teeth: 44
Item no.:345654
  • Position: Inner
  • Inner splines: 21
  • Seal diameter: 40 mm
  • Total length: 508 mm
  • Joint diameter: 72 mm
Item no.:0526080
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 27
  • ABS teeth: 42
Item no.:254634
  • Position: Outer
  • Splines wheel side: 27
  • Outer diameter: 90 mm
  • Outer splines: 27
  • ABS teeth: 42
Item no.:0932780
  • Inner diameter: 40 mm
  • Outer diameter: 56 mm
Item no.:351393
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 55 mm
  • Outer splines: 25
  • ABS teeth: 44
Item no.:0959005
  • Inner diameter: 24 mm
  • Outer diameter: 40 mm
Item no.:0681772
  • Total length: 119 mm
Showing 1–24 of 73 products

Drivetrain for Nissan Almera II Hatchback

The Nissan Almera II Hatchback is a car renowned for its reliability, but like any vehicle, it requires a fully functioning power transmission system to maintain its performance over time. The drivetrain is at the very core of your car's mobility, consisting of several interconnected components that must work in complete harmony. For owners of a Nissan Almera II Hatchback, wear on these components often develops gradually, meaning you can easily become accustomed to minor vibrations or noises before they escalate into serious issues. By maintaining your vehicle proactively and replacing worn drivetrain parts when necessary, you can significantly extend your car's lifespan and avoid costly consequential damage to the gearbox and suspension. At CVJoint24, we specialise in these critical components to provide you with the quality and confidence required for safe driving on European roads.

How the drivetrain is engineered on the Nissan Almera II Hatchback

Taking a closer look at the drivetrain setup on a Nissan Almera II Hatchback reveals a well-conceived front-wheel-drive design. The system starts at the gearbox, where torque is distributed to the two drive shafts. Each drive shaft for the Nissan Almera II Hatchback functions as the crucial link between the engine and the wheels. To accommodate both steering angles and suspension movement, CV joints are fitted: an inner joint at the gearbox that permits axial travel, and an outer joint at the wheel hub that allows wide articulation angles during steering. An often overlooked yet vital part is the ABS ring for the Nissan Almera II Hatchback mounted on the outer CV joint. This ring delivers precise signals to the car's ABS wheel-speed sensors, which is essential for preventing wheel lock-up under heavy braking. Because this entire chain of components is constantly exposed to road dirt, moisture and mechanical stress, manufacturing precision and durable materials are paramount.

Common faults and symptoms

Identifying common drivetrain faults and symptoms on your Nissan Almera II Hatchback is the vital first step towards an effective repair. One of the classic signs of a failing outer CV joint on the Nissan Almera II Hatchback is a rhythmic clicking sound, most audible when turning tightly while applying throttle. This is often triggered by a split CV boot, allowing the lubricating grease to escape and road dirt to ingress into the joint's bearing tracks. If you instead notice chassis vibrations during acceleration that fade away as soon as you lift off the throttle, this may indicate wear in the inner constant velocity joints or an imbalance in the driveshaft itself. Another typical issue on this model is a cracked ABS ring caused by rust forming beneath it; this alters the gap to the sensor and causes erratic ABS intervention or triggers the dashboard warning light. Ignoring these symptoms can lead to total component failure, leaving the vehicle completely immobilised.

Common parts to replace on the Nissan Almera II Hatchback

When maintaining a Nissan Almera II Hatchback, certain parts are replaced more frequently than others. In our range, we have selected and stocked the most critical items so you can get your car back on the road without delay. We currently offer several specific parts for this model across these categories:

  • Drive shafts: Complete shafts ready for straightforward fitting, offering a time-efficient solution when dealing with extensive wear.
  • Outer CV joints: Our most extensive range for the Almera II, covering the varied spline configurations found across different engine options.
  • ABS rings: Precision-engineered rings that are straightforward to install and restore full anti-lock braking functionality.

By focusing on these core areas, we ensure we have the exact parts and technical expertise Nissan owners need. Every component is carefully selected to match or exceed original specifications, ensuring dependable durability in demanding driving conditions.

Finding the right part for your Nissan Almera II Hatchback

Proceed to the relevant section for your Nissan Almera II Hatchback:

With multiple potential drivetrain faults on any vehicle, starting in the correct category is essential. By comparing the dedicated component areas for the Nissan Almera II Hatchback, it becomes simple to distinguish between issues with a drive shaft, CV joint or propeller shaft, and navigate directly to the parts that match your symptoms and specifications.

Why buy from CVJoint24?

Choosing CVJoint24 as your supplier of drivetrain components for your Nissan Almera II Hatchback means partnering with genuine technical specialists. We are a Swedish driveline specialist offering a dedicated range for the All car makes selection, meaning we do not just sell parts—we understand the engineering behind them. Our approach centres on deep category expertise, focusing on dependable quality and accurate fitment rather than trying to carry everything for everyone. Sourcing from our central warehouse in Helsingborg, Sweden, you benefit from our specialist knowledge and parts tailored for European roads. We understand that having a car stuck in the garage is both frustrating and inconvenient, which is why we continually optimise our inventory and make it effortless to select by make, model and engine variant. With CVJoint24, you can be sure of finding durable spare parts built to perform reliably over many kilometres.

Frequently asked questions about drivetrain parts for Nissan Almera II Hatchback

How do I know if my Nissan Almera II Hatchback needs a new outer CV joint?

The most common symptom is a clicking noise when turning on full lock under acceleration. If you hear this, you should inspect the CV boot for damage and consider replacing the joint.

Can I replace just the ABS ring on my Nissan Almera?

Yes, if the CV joint itself is in good condition, you can replace just the ABS ring. This is a cost-effective solution if the ring has cracked due to rust.

Why does my car vibrate under acceleration?

Vibrations under load are often caused by wear in the inner CV joints or an unbalanced drive shaft. It is important to resolve this promptly to avoid damaging the gearbox.

How do I find the correct drive shaft for my car?

Select your make, model and engine in our vehicle selector to filter the 14 parts matched to the Nissan Almera II Hatchback, ensuring an exact fit.

Is it difficult to replace a drive shaft on an Almera II?

It requires some mechanical experience and the correct tools, but it is a standard procedure. We always recommend checking the splines and overall length before fitting.

What is the quality of your drivetrain parts?

As Swedish driveline specialists, we only supply parts that meet or exceed original equipment specifications, engineered to withstand harsh European conditions.