Nissan Altima

Welcome to your specialist for Nissan Altima drivetrain components. Proper driveline maintenance is essential for your car's smooth performance and durability. At cvjoint24.com you will...

Products for Nissan Altima

37 products
1 - 24 of 37
Item no.:0971578
  • Inner diameter: 33 mm
  • Outer diameter: 59 mm
Item no.:0979282
  • Inner diameter: 39 mm
  • Outer diameter: 59 mm
Item no.:354444
  • Position: Outer
  • Inner splines: 35
  • Seal diameter: 56 mm
  • Outer splines: 29
  • Thread size: M24X1,5
Item no.:0624968
  • Total length: 105 mm
Item no.:115869
  • Splines gearbox side: 29
  • Splines wheel side: 29
  • Total length: 655 mm
  • Joint diameter: 101 mm
  • Joint diameter, gearbox side: 95 mm
Item no.:215836
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 32
  • Total length: 1,012 mm
Item no.:115298
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 32
  • Total length: 656 mm
Item no.:0688567
  • Total length: 94 mm
Item no.:141446
  • Position: Front left, Inner
  • Inner splines: 24
  • Splines gearbox side: 27
  • Seal diameter: 40 mm
  • Outer diameter: 81 mm
Item no.:0696947
  • Total length: 124 mm
Item no.:0973557
  • Inner diameter: 40 mm
  • Outer diameter: 56 mm
Item no.:0925402
  • Inner diameter: 33 mm
  • Outer diameter: 56 mm
Item no.:216308
  • Splines gearbox side: 29
  • Splines wheel side: 29
  • Total length: 987 mm
Item no.:118297
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 32
  • Total length: 638 mm
  • Diameter 1: 100 mm
Item no.:0615094
  • Total length: 92 mm
Item no.:0660503
  • Total length: 110 mm
Item no.:358414
  • Position: Front, Outer
  • Inner splines: 33
  • Splines wheel side: 27
  • Seal diameter: 56 mm
  • ABS teeth: 44
Showing 1–24 of 37 products

Drivetrain for Nissan Altima

The Nissan Altima is renowned for its comfort and dependability, but like any vehicle, its drivetrain requires regular inspection to preserve that smooth driving feel. The drivetrain is the system responsible for transferring engine power to the driven wheels, and on a Nissan Altima it is finely tuned to provide smooth, responsive acceleration. We supply a dedicated range of components tailored specifically to this model, ensuring every part meets the required technical specifications. Choosing the correct replacement parts not only extends your car's lifespan, but also ensures safety systems and fuel economy remain at their best.

We stock products engineered specifically for the Altima, providing comprehensive coverage for the most common driveline requirements of this Nissan model. Investing in quality rather than the cheapest alternative always pays off over time, particularly for moving components subjected to constant stress and varying weather conditions. Our range is carefully selected to withstand the demanding conditions European roads place on your vehicle's drivetrain.

How the Nissan Altima drivetrain is constructed

The Nissan Altima drivetrain layout typically uses a front-wheel-drive configuration, standard for most modern saloons in this segment. Power is produced by the engine, routed through the gearbox, and distributed to the front wheels via two drive shafts. Each drive shaft is a precision assembly fitted with an inner and an outer CV joint. The inner joint mounts directly to the gearbox or differential, allowing the shaft to plunge and articulate smoothly as the suspension responds to road imperfections.

The outer CV joint for the Nissan Altima sits at the wheel hub and performs a more demanding task: it accommodates suspension travel while allowing the front wheels to steer at wide angles. The entire assembly is shielded by CV boots—flexible rubber gaiters packed with specialised grease. These drive shaft boots are vital, preventing road grit, water and salt from entering the finely machined joint components while retaining the essential lubricating grease. Without intact boots, constant velocity joint wear accelerates rapidly.

Common faults and symptoms

Several distinct warning signs indicate that components in your Nissan Altima drivetrain are worn or damaged. The most typical symptom is a rhythmic clicking or knocking noise when taking tight turns, such as when parking or turning at junctions. This almost always points to a worn outer CV joint requiring replacement. If you instead feel vibrations through the steering wheel or the car's body, particularly under hard acceleration, this often indicates an unbalanced drive shaft or excess play in an inner joint.

Another common sign is grease splattered inside the wheel rim or across the wheel arch lining, pointing directly to a split CV boot. Catching a split boot early sometimes allows you to simply fit a new boot and repack the joint with fresh grease; waiting too long allows abrasive grit to ruin the internal bearing surfaces, necessitating a complete joint replacement. Ignoring these symptoms can ultimately cause driveshaft failure, leaving the vehicle stranded and potentially damaging surrounding suspension parts.

Common parts to replace on the Nissan Altima

For the Nissan Altima, our technical data and fault statistics highlight specific driveline components that see the highest demand. Our catalogue is structured to address these common issues effectively. We currently offer the following categories for your vehicle:

  • Drive shafts for Nissan Altima – We stock multiple variants. A complete drive shaft is frequently the most practical repair for heavy wear, as it arrives fully assembled with inner and outer joints alongside factory-fitted CV boots, ready to install.
  • Outer CV joints for Nissan Altima – Dedicated options allow cost-effective repairs when only the wheel-end joint is worn.
  • CV boots for Nissan Altima – We currently stock 1 dedicated CV boot kit, essential for preventative servicing.

By focusing on these core driveline components, we ensure that you can readily source the critical power transmission parts your Nissan Altima requires. Replacing worn components promptly safeguards your car's roadworthiness and resale value. All our parts are manufactured to strict standards to restore original factory performance.

Finding the right part for your Nissan Altima

Navigate directly to the appropriate category for your Nissan Altima:

When diagnosing driveline faults, starting in the precise subcategory makes identification straightforward. Comparing the relevant sections for the Nissan Altima helps you distinguish between drive shaft, CV joint, or propeller shaft issues, leading you straight to the correct fitment.

Checking fitment is particularly crucial on the Nissan Altima, as specifications vary by engine displacement, gearbox type and production year. Once you have filtered your results, always review the technical details in the product listing. Verify parameters such as the tooth count on the ABS ring and whether the part is intended for the left or right side. If you need guidance, our customer support team is on hand to help. Our goal is to ensure you receive the right component first time, preventing unwanted delays in the workshop.

Why buy from CVJoint24?

When you purchase from cvjoint24.com, you are choosing an international shop backed by a Swedish driveline specialist. We do not try to be a general car parts factor selling everything; we specialise strictly in the components that deliver power to your driven wheels. This sharp focus gives us a depth of range that general retailers rarely match, especially for distinct models like the Nissan Altima. We back our products with a dependable fitment guarantee, taking responsibility for ensuring the parts recommended for your vehicle model and engine configuration fit correctly.

To keep workshop and garage downtime to a minimum, our warehouse operates streamlined international logistics for fast dispatch across Europe. Combining quality replacement parts with practical driveline expertise and dedicated support, we aim to be your dependable first choice for Nissan drivetrain spares. With CVJoint24, you receive precision parts at fair prices from specialists who understand vehicle drivelines inside out.

Frequently Asked Questions about Drivetrain for Nissan Altima

How do I know if my Nissan Altima needs a new drive shaft?

The most common signs are vibrations under acceleration or clicking noises when cornering. If the vibrations persist despite balanced tyres, the drive shaft is often the culprit.

Can I replace just the CV boot on my Nissan Altima?

Yes, if you catch the damage early and the joint is still clean and well-lubricated, you can replace just the CV boot. If dirt has already entered, the CV joint should also be replaced.

Do all drive shafts fit all Nissan Altima models?

No, specifications differ depending on the model year, engine and gearbox. Always select your vehicle's make, model and engine variant to ensure the correct fitment.

What is the difference between an inner and outer CV joint?

The outer CV joint sits at the wheel hub and accommodates steering angles, whilst the inner CV joint sits at the gearbox and handles suspension travel. They show different symptoms when worn.

How quickly do you deliver parts for Nissan Altima?

We dispatch in-stock parts promptly from our warehouse to help you get your car back on the road as quickly as possible.

Are fitting accessories included when I buy a CV joint?

Yes, our CV joints are normally supplied as complete kits with a CV boot, grease, clips, and any bolt or nut required for the installation.