Nissan NV300

Spare parts and drivetrain components for the Nissan NV300.

Products for Nissan NV300

18 products
1 - 18 of 18
Item no.:1124686
  • Position: Front left
  • Splines gearbox side: 39
  • Splines wheel side: 29
  • Total length: 695 mm
  • Joint diameter: 94 mm
Item no.:2191842
  • Position: Front right
  • Splines gearbox side: 39
  • Splines wheel side: 29
  • Total length: 1,020 mm
  • Joint diameter: 94 mm
Item no.:140054
  • Position: Inner
  • Inner splines: 27
  • Splines gearbox side: 39
Item no.:247940
  • Position: Inner
  • Inner splines: 27
  • Splines gearbox side: 39
  • Total length: 460 mm
Item no.:257980
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 60 mm
  • Outer splines: 29
  • Total length: 164 mm
Item no.:1105914
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 29
  • Total length: 690 mm
  • Joint diameter: 94 mm
Item no.:2188707
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 29
  • Total length: 1,005 mm
  • Joint diameter: 94 mm
Item no.:2153319
  • Position: Front right
  • Splines gearbox side: 39
  • Splines wheel side: 29
  • Total length: 1,017 mm
  • Joint diameter: 94 mm
Item no.:151122
  • Position: Front left, Outer
  • Inner splines: 28
  • Seal diameter: 60 mm
  • Outer splines: 29
  • Total length: 164 mm
Item no.:146472
  • Position: Front left, Inner
  • Inner splines: 27
  • Splines gearbox side: 39
  • Seal diameter: 39 mm
  • Total length: 182,5 mm
Item no.:251290
  • Position: Front right, Outer
  • Inner splines: 28
  • Splines wheel side: 29
  • Seal diameter: 60 mm
  • Thread size: M22X1,5
Item no.:3529654
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 29
  • Outer diameter: 94 mm
Item no.:147952
  • Position: Inner
  • Inner splines: 27
  • Splines gearbox side: 39
Item no.:246142
  • Position: Inner
  • Inner splines: 27
  • Splines gearbox side: 39
  • Total length: 460 mm
Item no.:256839
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 60 mm
  • Outer splines: 29
  • Total length: 164 mm
Item no.:147595
  • Position: Inner
  • Inner splines: 27
  • Splines gearbox side: 39
Item no.:241420
  • Position: Inner
  • Inner splines: 27
  • Splines gearbox side: 39
  • Total length: 460 mm
Item no.:254675
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 60 mm
  • Outer splines: 29
  • Total length: 164 mm

Drivetrain for Nissan NV300

The Nissan NV300 is a robust and versatile commercial van that requires a dependable drivetrain to handle heavy daily payloads and demanding driving conditions. The drivetrain is the core of the vehicle's power transmission, responsible for transferring power from the engine all the way to the driven wheels. For professional drivers, reliability is essential, making it critical to use components engineered to the highest standards. At CVJoint24, our priority is providing parts designed to meet or exceed the original specifications for your Nissan. Proactively maintaining your drivetrain minimises the risk of costly downtime and significantly extends the service life of your vehicle. We understand the unique demands placed on commercial vans and tailor our range accordingly.

How the drivetrain is engineered on the Nissan NV300

The Nissan NV300 uses a modern front-wheel-drive platform where engine torque transfers from the gearbox through two drive shafts. This layout is efficient and ensures dependable traction, especially when carrying weight over the front axle. The assembly consists of several interconnected components: inner and outer CV joints, the shaft bar itself, and protective CV boots. The inner joints accommodate axial movement as the suspension travels up and down, while the outer constant velocity joints allow the wheels to steer whilst continuing to transfer torque. Because the NV300 often operates in stop-and-go city traffic with tight cornering, these components experience substantial mechanical stress. Splines on the shaft must be precision-machined to seat into the hub and gearbox without play, which is a key technical detail we prioritise.

Common faults and symptoms

Several distinct symptoms indicate that drivetrain components on your Nissan NV300 are worn or damaged. One of the most common signs is a clicking or knocking sound on full steering lock during acceleration, typically pointing to a worn outer CV joint. If you experience vibrations through the steering wheel or throughout the cabin under acceleration, an inner CV joint or a drive shaft on your Nissan NV300 may suffer from imbalance or internal wear. Regularly checking the CV boots is equally critical; if a boot splits, grease escapes and road dirt penetrates the joint, rapidly destroying it through friction. Spotting these signs early prevents secondary damage to the gearbox and suspension, saving substantial repair costs on a working commercial vehicle.

Common replacement parts for the Nissan NV300

On the Nissan NV300, replacing the complete drive shaft is usually the most practical solution once wear develops. We stock several variants of drive shafts for the Nissan NV300, covering most engine options and configurations across the model range. In addition to complete driveshaft assemblies, boot kits and mounting hardware—such as circlips, hub nuts, and bolts—are common maintenance items. Because the NV300 is built for heavy commercial work, its drive shafts are dimensioned for high torque, yet they remain subject to natural wear. Replacing the entire drive shaft is often more cost-effective and saves workshop time compared to rebuilding individual joints on an old shaft, ensuring fresh components at both ends and factory-fitted, securely sealed boots.

Finding the right parts for your Nissan NV300

Navigate directly to the appropriate category for the Nissan NV300:

With multiple potential drivetrain issues on a commercial van, starting in the correct category saves time. Comparing specific sections for the Nissan NV300 makes it simple to distinguish between drive shaft, CV joint, or propeller shaft issues, leading straight to the parts that match your vehicle's symptoms and fitment.

Using our catalogue ensures you select components with precise fitment first time, preventing ordering errors and eliminating delays in the workshop. Our vehicle database is continuously updated with the latest specifications for the NV300 series, ensuring a smooth ordering process every time.

Why shop with CVJoint24

CVJoint24 is your dedicated specialist for power transmission and drivetrain parts. As the international shop of a Swedish driveline specialist, we combine deep technical know-how with a comprehensive inventory tailored to European commercial vehicles. We understand that your Nissan NV300 is an indispensable business tool, which is why we never compromise on part quality. By focusing exclusively on driveline components, our team provides targeted expertise and reliable stock availability for prompt dispatch across the EU. Simply select your make, model, and engine to find guaranteed-fit car parts designed to withstand harsh European winters and rigorous daily commercial use. Rely on a dedicated specialist—choose CVJoint24 for dependable performance and long-lasting drivetrain reliability.

Frequently Asked Questions about Nissan NV300 Drivetrain Parts

How do I know if my Nissan NV300 needs a new drive shaft?

The most common symptoms are clicking noises when turning, vibrations during acceleration, or visible grease leaking from a split CV boot. If vibrations increase with speed, it often indicates an unbalanced drive shaft.

Do all drive shafts fit every Nissan NV300?

No, it depends on the engine variant, gearbox type, and model year. It is therefore essential to filter by your vehicle's make, model, and engine to ensure you find the exact fit for your van.

Can I replace just the CV joint instead of the complete shaft on my NV300?

Yes, it is technically possible, but for the Nissan NV300 we often recommend replacing the complete drive shaft. It saves workshop time and guarantees that both the inner and outer joints, as well as the CV boots, are in brand-new condition.

Why is it important to replace a damaged CV boot immediately?

A split CV boot lets lubricating grease escape while allowing dirt and road moisture inside. This rapidly destroys the constant velocity joint, which can lead to complete mechanical failure if neglected.

How many drive shafts does a Nissan NV300 have?

The Nissan NV300 is front-wheel drive and has two drive shafts—one on the left side and one on the right—transmitting power from the gearbox to the front wheels.

Which drive shaft brands do you supply for the Nissan NV300?

We supply carefully selected driveline components from leading aftermarket manufacturers that meet our stringent standards for quality and precise fitment, specially engineered for commercial vans like the NV300.