Nissan NV400

Spare parts and drivetrain components for the Nissan NV400.

Products for Nissan NV400

30 products
25 - 30 of 30
Item no.:140165
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 39 mm
  • Total length: 183 mm
  • Joint diameter: 88 mm
Item no.:625845
  • Position: Rear
  • Total length: 1,251 mm
  • Number of joints: 3
  • Outer diameter 1: 16 mm
  • Bolt circle diameter 1: 120 mm
Item no.:0819305
  • Inner diameter: 45 mm
  • Bearing thickness: 19 mm
  • Hole spacing c/c: 170 mm
Item no.:248449
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 30 mm
  • Total length: 451 mm
  • Outer splines: 39
Item no.:0604340
  • Total length: 113 mm
Item no.:148459
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 39 mm
  • Total length: 183 mm
  • Joint diameter: 88 mm
Showing 25–30 of 30 products

Drivetrain for Nissan NV400

The Nissan NV400 is a robust workhorse frequently subjected to heavy payloads and demanding driving conditions across European roads. The drivetrain is the core of your van's ability to transport cargo efficiently, and maintaining these components in top condition is vital to avoid costly operational downtime. As specialists in All car makes drivetrain components, we offer dedicated solutions for this model, combining in-depth technical knowledge with a range tailored to the unique demands of commercial vehicles. Selecting the correct spare parts ensures power transfer remains smooth without unnecessary energy loss, ultimately cutting fuel consumption and minimising wear on other mechanical parts in your Nissan NV400.

How the Nissan NV400 drivetrain is built

The drivetrain on a Nissan NV400 is engineered to handle the high torque produced by modern diesel engines. The system primarily consists of a gearbox that distributes power via drive shafts to the front wheels. Because the NV400 is often operated commercially under heavy load, these parts are dimensioned to withstand high stress over long periods. A central element of this assembly is the Nissan NV400 drive shaft on each side, equipped with inner and outer joints to accommodate suspension travel and steering articulation. The outer joint is particularly critical, as it must handle wide steering angles at full lock while transferring driving power to the wheel under acceleration.

Common faults and symptoms

Several clear signs indicate that your Nissan NV400 drivetrain components are wearing out and require inspection. One of the most typical symptoms is a clicking or knocking noise when taking tight turns, which often points to a worn outer CV joint for your Nissan NV400 failing from fatigue or grit ingress. Vibrations felt through the steering wheel or the entire chassis under acceleration can instead signal an unbalanced or worn driveshaft assembly or its inner joints. It is equally essential to inspect the CV boots regularly; leaking grease from a split boot allows grit to enter rapidly and damage the sensitive bearing surfaces, leading to complete joint failure if not sorted promptly.

Common parts to replace on the Nissan NV400

For the Nissan NV400, certain components regularly endure the heaviest wear during day-to-day operation. Based on our stock data and repair trends, drive shafts and outer CV joints are the parts most frequently replaced over the vehicle's lifespan to maintain reliability. Here are the most relevant categories for your vehicle:

  • Drive shaft for Nissan NV400 – We supply complete shafts for both the driver and passenger sides, which is often the most time-efficient solution for garage repairs.
  • Outer CV joint for Nissan NV400 – The component that typically wears out first due to extreme steering angles and road contamination.

Replacing the complete drive shaft is often preferable on a commercial van like the NV400, as it cuts down workshop labour time and ensures both the inner and outer joints are in pristine condition simultaneously, extending the overall service life of the repair.

How to find the right part for your Nissan NV400

Navigate directly to the relevant subcategory for your Nissan NV400:

When troubleshooting drivetrain issues, identifying the correct component straight away saves valuable time. By comparing the specific sections for the Nissan NV400, you can distinguish whether the problem lies in the drive shaft, CV joint or propeller shaft, taking you directly to the parts that match your symptoms and specifications.

We always recommend selecting your vehicle by make, model and engine variant as the first step to ensure you receive components that fit your specific model year perfectly.

Why shop with CVJoint24

CVJoint24 is not just an ordinary car parts shop; we are the international store of a Swedish driveline specialist, with a dedicated focus on drivetrains and power transmission. Our strength lies in extensive technical knowledge and a commitment to providing precision-fit parts for commercial vehicles like the Nissan NV400. Sourced from our central warehouse in Helsingborg, Sweden, our components meet rigorous standards, developed to handle demanding climates and the stresses of heavy transport across Europe. With our specialist support, you can rely on receiving the right guidance and correct spare parts every time. We build trust by supplying robust components that keep your van working on the road longer while cutting the risk of unexpected breakdowns.

Frequently Asked Questions about Drivetrain Parts for Nissan NV400

How do I know if my Nissan NV400 needs a new drive shaft?

The most common signs are heavy vibrations throughout the vehicle under acceleration or unusual noises from underneath. If the vibrations stop as soon as you ease off the throttle, this is a strong indication of wear in the drive shaft's inner joints.

What are the symptoms of a worn outer CV joint on a Nissan NV400?

A worn outer CV joint usually produces a rhythmic clicking or knocking noise when cornering, especially at lower speeds and on full steering lock. The frequency of the noise typically increases in time with the speed of the van.

Do all drive shafts fit every Nissan NV400 model?

No, drive shafts vary depending on the engine variant, gearbox (manual or automatic), and sometimes the payload capacity of the vehicle. Always select your specific make, model, and engine variant to ensure you find the correct part.

Why is it important to check the CV boots on my NV400?

The CV boot protects the CV joint by keeping the lubricating grease in and sealing out dirt and moisture. A split or torn boot quickly leads to premature joint failure, resulting in a much more expensive repair.

Is it better to replace the complete drive shaft rather than just the CV joint?

For a commercial van like the Nissan NV400, replacing the complete drive shaft is often more economical. It saves valuable labour time at the garage and ensures both the inner and outer joints are replaced simultaneously, maximising operational reliability.

Do your spare parts match original equipment quality?

Yes, our car parts are manufactured to meet or exceed original equipment specifications. As driveline specialists, we only select components capable of handling the tough demands placed on commercial vehicles in demanding European conditions.