Outer CV joints for BMW 4 Serie

Find the right outer CV joints for BMW 4 Serie by browsing our extensive range for both rear-wheel drive and all-wheel drive models. Whether you drive a coupé or convertible with a...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Outer CV joints for BMW 4 Serie

129 products
73 - 96 of 129
Item no.:355525
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5X72
Item no.:0507563
  • Position: Outer
  • Inner splines: 33
  • Splines wheel side: 31
  • Outer diameter: 86 mm
Item no.:353500
  • Position: Front, Outer
  • Inner splines: 33
  • Splines wheel side: 37
  • Seal diameter: 65 mm
  • Thread size: M16X1,5
Item no.:655313
  • Position: Rear, Outer
  • Inner splines: 30
  • Seal diameter: 57,2 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:650563
  • Position: Rear, Outer
  • Inner splines: 33
  • Splines wheel side: 28
  • Seal diameter: 57,2 mm
  • Thread size: M24X1,5
Item no.:0594781
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:6567512
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 28
  • Outer diameter: 90 mm
Item no.:350209
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5X72
Item no.:0512580
  • Position: Outer
  • Inner splines: 33
  • Splines wheel side: 31
  • Outer diameter: 86 mm
Item no.:652215
  • Position: Rear, Outer
  • Inner splines: 30
  • Seal diameter: 57,2 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:654945
  • Position: Rear, Outer
  • Inner splines: 33
  • Splines wheel side: 28
  • Seal diameter: 57,2 mm
  • Thread size: M24X1,5
Item no.:0595593
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:6575731
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 28
  • Outer diameter: 90 mm
Item no.:358710
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5X72
Item no.:0514485
  • Position: Outer
  • Inner splines: 33
  • Splines wheel side: 31
  • Outer diameter: 86 mm
Item no.:650442
  • Position: Rear, Outer
  • Inner splines: 33
  • Splines wheel side: 28
  • Seal diameter: 57,2 mm
  • Thread size: M24X1,5
Item no.:0577196
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:6582701
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 28
  • Outer diameter: 90 mm
Item no.:350479
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5X72
Item no.:0518196
  • Position: Outer
  • Inner splines: 33
  • Splines wheel side: 31
  • Outer diameter: 86 mm
Item no.:657240
  • Position: Rear, Outer
  • Inner splines: 33
  • Splines wheel side: 28
  • Seal diameter: 57,2 mm
  • Thread size: M24X1,5
Item no.:0506389
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:350620
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5X72
Item no.:0518209
  • Position: Outer
  • Inner splines: 33
  • Splines wheel side: 31
  • Outer diameter: 86 mm
Showing 73–96 of 129 products

Outer CV joints for BMW 4 Serie

The BMW 4 Serie is renowned for its precision and dynamic handling, placing exceptionally high demands on every single component in the drivetrain. An outer CV joint is a critical link in this system, transferring power from the engine to the wheels while simultaneously accommodating both steering and suspension movement. Here at CVJoint24, you will find a comprehensive range tailored specifically for this model range, backed by our expertise as a Swedish driveline specialist. Choosing the correct part is essential for preserving your car's original driving performance and ensuring long service life throughout the entire power delivery system. We focus on supplying parts that match or exceed original equipment specifications, allowing you to enjoy the precise driving feel your car was engineered to deliver.

What does an outer CV joint do on a BMW 4 Serie?

The outer CV joint on a BMW 4 Serie is fitted at the outboard end of the drive shaft, right at the wheel hub. Its primary job is to deliver smooth power transmission from the gearbox to the road wheels, whether your car is equipped with xDrive all-wheel drive or traditional rear-wheel drive. Because the outer joint must cope with steep angles when steering the front wheels, it is engineered as a constant velocity joint. This ensures that the wheel rotates at a constant speed regardless of the steering angle, which is absolutely vital for driving stability, comfort, and safety. Without a properly functioning outer CV joint, power delivery would turn jerky and the car's roadholding would deteriorate substantially, particularly during cornering and under hard acceleration.

Common symptoms of wear

There are several clear warning signs indicating that an outer CV joint on your BMW 4 Serie is wearing out or damaged. The most frequent symptom is a clicking, knocking, or popping sound that becomes distinct when making sharp turns at low speeds, such as during parking manoeuvres. If the noise disappears once you straighten the steering wheel and drive straight ahead, it is a classic indication that the balls in the outer joint have begun to pit their raceways. You should also inspect the CV boot regularly; if it is split or has come loose, the essential grease leaks out whilst dirt and moisture penetrate inside. This dramatically accelerates wear and can cause complete joint failure if left unaddressed. Vibrations through the steering wheel whilst driving can also point to an imbalance caused by a defective joint.

How to choose the correct outer CV joint

Identifying the exact outer CV joint requires careful attention, as specifications vary according to engine option, model year, and drivetrain layout. The most critical technical specification is the spline count—the number of teeth—on both the inner and outer sections of the joint. In addition, you must verify whether the joint features an integrated ABS ring or if the sensor takes its reading via an alternative method. To avoid technical complications and time-consuming returns, we strongly advise selecting your car's make, model, and engine variant in our vehicle selector. This is the most reliable way to filter parts that are technically compatible with your specific BMW 4 Serie, ensuring you receive a component with the correct dimensions and spline count for your drive shaft.

Related parts to inspect

Be sure to review these relevant pages for your vehicle when working on the outer CV joint:

When a driveline component shows signs of wear, neighbouring parts on the same car often require inspection as well. Comparing these exact pages for the BMW 4 Serie makes it straightforward to determine whether the issue lies specifically with the outer CV joint or another adjacent section of the drivetrain.

This is particularly relevant for models where vibrations, play, and strange noises can transfer symptoms across multiple parts in the driveline. A quick check of related categories reduces the risk of replacing the right type of part whilst missing an adjacent component that contributes to the very same fault.

When you are already replacing an outer CV joint, it is sensible to inspect the rest of the drivetrain to prevent future breakdowns and save on long-term garage labour costs. It is often more economical or practical to replace the complete driveshaft assembly if several components exhibit wear or if the CV boots on both ends have deteriorated. Here are the primary related categories for your car that you should keep an eye on:

  • Drive shafts for BMW 4 Serie – Ideal if the complete shaft is damaged, severely rusted, or suffering from imbalance.
  • Inner CV joints for BMW 4 Serie – Situated nearest to the gearbox, this part is frequently the source of vibrations felt throughout the cabin under acceleration.
  • Propeller shafts for BMW 4 Serie – Particularly vital for power transfer on xDrive models, where the prop shaft links the front and rear axles.
By inspecting these components, you ensure the entire drivetrain operates in harmony and lower the risk of consequential damage to costlier units such as the gearbox and differential.

Why shop at CVJoint24?

CVJoint24 is your Swedish driveline specialist for all automotive drivetrain components, shipping directly from our warehouse in Helsingborg across the EU. We combine in-depth technical expertise with a product range carefully curated to meet the exacting standards of BMW owners. When buying from us, you get top-tier spare parts along with the confidence that each component is selected for high quality and accurate fitment. Our dedicated focus on drivelines allows us to provide a level of support and technical guidance that general car parts retailers rarely match. We understand the technical nuances of the BMW 4 Serie and can guide you to the perfect solution. With dependable EU delivery and an easy-to-use search by make, model, and engine, we make it effortless to keep your car in peak mechanical condition at fair prices. Our goal is to be the obvious choice for both DIY mechanics and professional garages who demand dependable quality.

Frequently asked questions about outer CV joints for BMW 4 Serie

How do I know if my BMW 4 Serie needs a new outer CV joint?

The most common sign is a clicking or knocking noise heard when making sharp turns at low speed. If the noise disappears when driving straight ahead, it is almost certainly a worn outer CV joint.

Can I replace just the boot instead of the entire CV joint?

Yes, if you catch a damaged boot early before dirt has entered and damaged the joint itself, replacing just the CV boot and repacking it with fresh grease may be sufficient.

Are the CV joints different between xDrive and rear-wheel-drive BMW 4 Serie models?

Yes, there can be differences in dimensions and spline counts depending on whether the car is four-wheel drive or rear-wheel drive. Always select your vehicle's make, model and engine to find the correct version.

What happens if I keep driving with a faulty outer CV joint?

In the worst case, the joint can fail completely, meaning the wheel loses all drive and leaves you stranded. It can also cause costly collateral damage to the wheel hub and drive shaft.

Do I need special tools to replace a CV joint on my BMW?

You will often need a heavy-duty socket for the hub nut and occasionally a puller. It is a job that requires mechanical experience and tightening to the correct torque settings during reassembly.

How many splines does an outer CV joint for a BMW 4 Serie have?

The number of splines varies depending on the engine variant and model year. It is therefore vital to check the product specifications or filter by your car's make, model and engine.

Are grease and clamps included when I buy an outer CV joint from you?

Yes, our outer CV joints are supplied as complete kits including the joint, CV boot, specialised grease, clamps and usually a new hub nut or bolt.