Outer CV joints for BMW 5 Serie

Discover outer CV joints for BMW 5 Serie in our comprehensive range, covering classic saloon models through to modern hybrids. Whether your car is rear-wheel drive or equipped with...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Outer CV joints for BMW 5 Serie

187 products
25 - 48 of 187
Item no.:6513334
  • Position: Outer
  • Inner splines: 24
  • Outer diameter: 100 mm
Item no.:359384
  • Position: Front, Outer
  • Inner splines: 25
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Total length: 58,7 mm
Item no.:351516
  • Position: Front, Outer
  • Inner splines: 26
  • Splines wheel side: 37
  • Seal diameter: 65 mm
  • Thread size: M16X1,5
Item no.:0527261
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Thread size: M16X1,5
Item no.:652264
  • Position: Rear, Outer
  • Splines gearbox side: 30
  • Splines wheel side: 25
  • Total length: 135 mm
Item no.:0515489
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 37
  • Seal diameter: 732 mm
  • Splines gearbox side: 25
Item no.:354116
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:6503781
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Outer diameter: 94 mm
Item no.:0569685
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 30
  • Outer diameter: 90 mm
Item no.:0529230
  • Position: Front, Outer
  • Inner splines: 33
  • Splines wheel side: 30
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0546348
  • Position: Rear, Outer
  • Inner splines: 25
  • Splines wheel side: 30
  • Outer diameter: 88 mm
Item no.:3559352
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:3583931
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:355047
  • Position: Front, Outer
  • Inner splines: 25
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Total length: 58,7 mm
Item no.:350085
  • Position: Front, Outer
  • Inner splines: 26
  • Splines wheel side: 37
  • Seal diameter: 65 mm
  • Thread size: M16X1,5
Item no.:0543860
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Thread size: M16X1,5
Item no.:650153
  • Position: Rear, Outer
  • Splines gearbox side: 30
  • Splines wheel side: 25
  • Total length: 135 mm
Item no.:0566315
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 37
  • Seal diameter: 732 mm
  • Splines gearbox side: 25
Item no.:350108
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:6512214
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Outer diameter: 94 mm
Item no.:0589558
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 30
  • Outer diameter: 90 mm
Item no.:0531790
  • Position: Front, Outer
  • Inner splines: 33
  • Splines wheel side: 30
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0557665
  • Position: Rear, Outer
  • Inner splines: 25
  • Splines wheel side: 30
  • Outer diameter: 88 mm
Item no.:3596653
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Showing 25–48 of 187 products

Outer CV joints for BMW 5 Serie

The BMW 5 Serie represents a high standard of automotive engineering where every component in the drivetrain must work in perfect harmony to deliver the driving dynamics for which the brand is renowned. The outer CV joint is one of the most heavily stressed parts of the entire driveline, as it continually handles power transmission from the engine while accommodating sharp angular changes during steering and suspension movement. At CVJoint24, you will find a comprehensive range tailored specifically for your BMW 5 Serie. We focus on supplying components that maintain the car's original performance, durability, and safety. Choosing the right quality spare parts ensures your car stays dependable over many thousands of kilometres, whether for the daily commute or spirited driving along winding roads. Investing in a high-grade CV joint is a reliable way to protect the rest of your drivetrain from premature wear and costly garage repairs.

What does the outer CV joint do on a BMW 5 Serie?

The outer CV joint on a BMW 5 Serie is a constant velocity joint mounted at the outer end of the drive shaft right at the wheel hub. Its primary purpose is to transfer engine torque to the road wheels at a constant rotational speed, irrespective of the wheel's angle relative to the axle. This requires exceptional manufacturing precision, especially on a chassis as finely tuned as the BMW 5 Serie, which demands optimum road contact and razor-sharp steering feel. The joint allows the wheel to move vertically over bumps and horizontally during steering input without interrupting power delivery or causing mechanical shudder. A fully functional joint is therefore essential for the smooth, precise power transfer expected of a premium vehicle. Without this flexible link, the drivetrain would experience severe binding forces that would quickly lead to total mechanical failure.

Common signs of wear

Identifying CV joint wear early can save you significant time and substantial repair bills. The most classic symptom of a worn outer CV joint on a BMW 5 Serie is a rhythmic clicking or knocking noise that is most noticeable when making tight turns at low speeds, such as during parking manoeuvres. The clicking frequency typically increases with vehicle speed. Another frequent sign is vibration felt through the steering wheel or chassis under acceleration, which often indicates that internal play has developed or lubrication has failed. It is also wise to inspect the CV boot regularly; if it is split, perished, or covered in flung grease, dirt and water will quickly ruin the joint itself. Because the cabin of a BMW 5 Serie is exceptionally quiet and refined, even minor drivetrain imbalances can be readily felt, making it crucial to act at the first sign of an unusual noise.

How to choose the correct outer CV joint

To choose the correct outer CV joint for your BMW 5 Serie, the simplest and most reliable method is to select your car's exact make, model and engine variant in our catalogue. Because BMW has used a wide variety of drive shafts and joints depending on engine power, gearbox type, and whether the vehicle is rear-wheel drive or fitted with the xDrive all-wheel-drive system, technical accuracy is essential. When checking manually, verify the number of splines on the shaft where the joint mounts, as well as the outer diameter and overall length. Certain 5 Series variants also feature integrated ABS rings directly on the CV joint, which must match the original vehicle specification. Selecting your exact model and engine filters for technically compatible products, preventing incorrect orders and workshop downtime. We always advise fitting a joint supplied complete with new grease, CV boot, and mounting hardware for the best result.

Related parts to inspect

You can also check these matching pages for the same vehicle when working on the outer CV joint:

When a drivetrain component wears out, surrounding parts on the same car often require inspection as well. Comparing these exact pages for the BMW 5 Serie makes it easier to determine whether the issue lies in the outer CV joint itself or in an adjacent section of the driveline.

This is especially important on models where vibrations, play, and noises can travel across multiple components in the drivetrain. A quick check of related categories reduces the risk of replacing one correct part while overlooking an adjacent component that causes the same underlying fault.

By ensuring that all these driveline parts remain in good condition, you will preserve your car's operational reliability, safety, and the signature driving dynamics of a BMW.

Why buy from CVJoint24?

CVJoint24 is your dedicated specialist for driveline parts across Europe. As Swedish driveline specialists, we focus exclusively on power transmission, giving us the deep technical knowledge that general car-parts suppliers often lack. We maintain an extensive range with high stock availability at our central Helsingborg warehouse, ensuring you quickly receive the parts required to get your vehicle back on the road. Our focus on precise fitment and OE quality means you can rely on our BMW 5 Serie components to fit perfectly and endure over time. With our straightforward search by make, model and engine, thorough product details, and expert support, we are the trusted choice for both DIY mechanics and professional garages. When you order from us, you get dependable spare parts backed by specialist expertise so your repair is done right first time.

Frequently asked questions about outer CV joints for BMW 5 Serie

How do I know if the outer CV joint on my BMW 5 Serie is failing?

The most common sign is a clicking or knocking noise when turning at low speeds. You might also notice steering wheel vibrations under acceleration or grease splattered on the inside of the wheel if the CV boot has split.

Can I replace just the CV joint, or does the entire drive shaft need to be replaced?

On most BMW 5 Serie models, the outer CV joint can be replaced separately, which is far more cost-effective than replacing the complete drive shaft, provided the shaft itself is undamaged.

Why is it important to check the CV boot regularly?

The CV boot protects the constant velocity joint by retaining the lubricating grease and keeping out dirt and water. A split or damaged boot quickly leads to premature wear and joint failure.

Do all outer CV joints fit all BMW 5 Serie models?

No, specifications vary depending on the engine, model year, and whether the car is rear-wheel drive or equipped with xDrive. Always select your vehicle make, model and engine to find the exact part you need.

What is typically included when I buy an outer CV joint from you?

Our CV joint kits are normally supplied complete with the joint itself, a vehicle-specific CV boot, high-quality grease, circlips, and clamps for a complete and hassle-free installation.

Can a failing CV joint affect the vehicle's ABS?

Yes, if the CV joint has an integrated ABS ring and this becomes damaged, corroded, or heavily soiled, it can trigger fault codes and cause the ABS to stop functioning correctly.

Is it difficult to replace an outer CV joint yourself on a BMW 5 Serie?

It requires mechanical experience and the correct tools, such as a puller and a torque wrench. If you are unsure, we always recommend having the job done by a professional garage.