Outer CV joints for Volvo C30

Find the correct outer CV joint for your Volvo C30 by selecting your car's make, model and engine. Our range covers front-wheel-drive hatchback models running petrol, diesel or flex-fuel...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Outer CV joints for Volvo C30

285 products
265 - 285 of 285
Item no.:650464
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:0536349
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 26
  • Outer splines: 36
  • Joint diameter: 86,95 mm
Item no.:258990
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 24
  • Outer splines: 36
  • Joint diameter: 81 mm
Item no.:351179
  • Position: Outer
  • Seal diameter: 57,5 mm
  • Inner splines: 26
  • Outer splines: 40
  • Joint diameter: 92 mm
Item no.:3573963
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 33
  • Outer splines: 36
  • ABS teeth: 48
Item no.:352444
  • Position: Outer
  • Seal diameter: 57,5 mm
  • Inner splines: 27
  • Outer splines: 40
  • ABS teeth: 48
Item no.:3528831
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 27
  • Outer diameter: 97 mm
  • ABS teeth: 43
Item no.:358012
  • Position: Outer
  • Seal diameter: 57 mm
  • Inner splines: 26
  • Outer diameter: 90 mm
  • Splines wheel side: 40
Item no.:659959
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Outer diameter: 71 mm
  • ABS teeth: 88
Item no.:3512722
  • Position: Outer
  • Seal diameter: 57 mm
  • Inner splines: 27
  • Outer diameter: 100 mm
  • Splines wheel side: 40
Item no.:354026
  • Position: Outer
  • Seal diameter: 57 mm
  • Inner splines: 28
  • Outer diameter: 92 mm
  • Splines wheel side: 40
Item no.:3587448
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 27
  • Outer diameter: 100 mm
  • ABS teeth: 48
Item no.:3532819
  • Position: Outer
  • Seal diameter: 57 mm
  • Inner splines: 28
  • Outer diameter: 94 mm
  • ABS teeth: 48
Item no.:3508185
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 26
  • Outer diameter: 90 mm
  • Splines wheel side: 36
Item no.:3543231
  • Position: Outer
  • Seal diameter: 54 mm
  • Inner splines: 24
  • Outer diameter: 84 mm
  • Splines wheel side: 36
Item no.:3574429
  • Position: Outer
  • Seal diameter: 57 mm
  • Inner splines: 27
  • Outer diameter: 100 mm
  • ABS teeth: 48
Item no.:659647
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:352643
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 26
  • Outer splines: 36
  • Joint diameter: 90,9 mm
Item no.:658492
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:352702
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 26
  • Outer splines: 36
  • Joint diameter: 90,9 mm
Item no.:650018
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Showing 265–285 of 285 products

Outer CV joints for Volvo C30

The Volvo C30 is well known for its compact design, distinctive glass tailgate and sporty handling that appeals to drivers who appreciate both style and practicality. To maintain this dynamic driving experience, a smooth and fully operational drivetrain is vital. The outer CV joint is a crucial component in this assembly that is subjected to immense stress, particularly during spirited driving or frequent urban motoring with tight turns. At CVJoint24, you will find a comprehensive and carefully selected range of parts tailored to your car's exact requirements and technical specifications. We understand the necessity of precise fitment and only stock components that meet the high standards demanded by a modern Volvo. By sourcing the correct spare parts from a dedicated specialist, you preserve your car's reliability, long-term resale value and road performance.

What does the outer CV joint do on a Volvo C30?

The outer CV joint on a Volvo C30 is positioned at the outer end of the drive shaft, connecting directly to the wheel hub. Its primary and crucial role is to transfer engine torque from the gearbox and drive shaft straight to the front wheels. What makes this constant velocity joint unique is its ability to operate at wide angles; it must deliver seamless power while the wheel moves up and down over road imperfections and turns to steer the vehicle. Without this flexible, robust coupling, steering the car under acceleration would be impossible. It is a high-precision component comprising inner and outer races, steel balls and a ball cage, all lubricated with high-performance molybdenum disulphide grease. On a front-wheel-drive hatchback like the C30, the demands on these parts are significant, as they continually handle substantial torque alongside changing steering angles.

Common signs of wear

Several clear warning signs indicate that an outer CV joint on your Volvo C30 is reaching the end of its service life. The most typical symptom is a rhythmic clicking, popping or knocking noise clearly heard when making tight turns at low speeds, such as during parallel parking or pulling out of junctions. This noise typically speeds up as the vehicle accelerates. Another frequent sign is perceptible vibration through the steering wheel or floorpan under acceleration, pointing to imbalance or internal wear within the joint. It is also essential to check for grease splattered over the inside of the wheel rim, brake caliper or wheel arch. This is a definitive sign that the CV boot has split or slipped off. Once protective grease escapes and road dirt, grit and moisture enter the joint, rapid deterioration begins, inevitably leading to complete failure if not resolved promptly.

How to choose the correct outer CV joint

Selecting the right outer CV joint for your Volvo C30 requires careful attention, as several technical variations exist depending on your engine, gearbox and model year. The main distinguishing factors are the spline counts (teeth) on the shaft that inserts into the joint and on the stub axle entering the wheel hub. Different engine options, such as smaller petrol units compared to high-torque diesels, often require completely different CV joint dimensions. There can also be differences in how the ABS signal is measured; certain models feature an integrated ABS ring on the joint itself, whereas others utilise a magnetic sensor embedded in the wheel bearing. To ensure complete compatibility, select your car's exact make, model and engine variant in our store. This immediately filters down the 26 relevant products for your specific vehicle. Also verify whether your current joint is secured with a central hub bolt or a nut, as this is an important detail during assembly.

Related components to inspect

We also recommend checking these specific pages for the same vehicle when working on an outer CV joint:

When a drivetrain component develops wear, neighbouring parts on the vehicle often warrant inspection too. By comparing these exact pages for the Volvo C30, it is easier to determine whether the issue stems purely from the outer CV joint or another adjacent section of the drivetrain.

This is particularly useful on models where vibrations, play and noises can travel between several parts of the same assembly. A quick check of related categories reduces the risk of replacing one correct component while overlooking an adjoining part causing the same fault.

By taking a proactive approach and inspecting these components, you ensure your car remains dependable and safe for many kilometres to come.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching across the EU directly from our warehouse in Helsingborg, Sweden. Over many years, we have built up deep technical expertise to provide drivers and workshops with first-class support when choosing replacement parts. When you order from us, you benefit not only from a wide and specialised catalogue, but also from the assurance that we thoroughly understand the mechanical intricacies of every component. We focus entirely on vehicle driveline parts, allowing us to maintain far greater precision and relevance than general car parts retailers. By filtering easily by make, model and engine, you eliminate the risk of ordering the wrong item and can rest assured that the outer CV joints you choose will fit your Volvo C30 seamlessly. We combine specialist technical knowledge with rapid European dispatch and dependable quality to offer you the ideal solution for your car's maintenance.

Frequently Asked Questions about outer CV joints for Volvo C30

How do I know whether the outer or inner CV joint has failed on my Volvo C30?

A worn or damaged outer CV joint typically makes a clicking or knocking sound on full steering lock. A faulty inner CV joint is more likely to cause shuddering or vibrations throughout the car under acceleration, whether driving straight or cornering.

Can I replace just the CV boot if the joint still feels fine?

Yes, if you catch a split CV boot early before grit and road dirt have entered to damage the joint, you can thoroughly clean it, repack it with fresh grease and fit a replacement boot to prolong its service life.

Do I need to carry out wheel alignment after replacing an outer CV joint?

Normally wheel alignment is not required if you simply separate the CV joint from the wheel hub. However, if you have to dismantle the suspension strut or ball joints to gain clearance, checking the alignment is sensible practice.

Which tools are required to replace an outer CV joint on a Volvo C30?

You will generally need a socket set, a sturdy breaker bar for the hub bolt or nut, a torque wrench, specialist CV boot clamp pliers and potentially a puller to release the joint from the drive shaft splines.

Does the same outer CV joint fit all Volvo C30 engine options?

No, there are several distinct versions depending on whether your car is a 1.6, D2, D5 or T5. Spline counts and physical joint dimensions vary, so always confirm your exact vehicle make, model and engine specification before ordering.

How long does it take to change an outer CV joint?

For an experienced DIY mechanic or garage technician, replacement typically takes between 1 and 2 hours per side, depending on how tightly seized the hub bolt and splines are.