Outer CV joints for Volvo V90

Find the right outer CV joint for your Volvo V90. Select your specific make, model and engine to ensure an exact match for your estate, whether you drive a front-wheel-drive or...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Outer CV joints for Volvo V90

94 products
49 - 72 of 94
Item no.:3584976
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 57,5 mm
  • Outer splines: 40
  • Total length: 112 mm
Item no.:0502517
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 54,1 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:0533028
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 54 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:150971
  • Position: Outer
  • Inner splines: 26
  • Splines wheel side: 40
Item no.:3576724
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 57,5 mm
  • Outer splines: 40
  • Total length: 112 mm
Item no.:0553146
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 54,1 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:0545465
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 54 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:158109
  • Position: Outer
  • Inner splines: 26
  • Splines wheel side: 40
Item no.:3519024
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 57,5 mm
  • Outer splines: 40
  • Total length: 112 mm
Item no.:0517789
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 54,1 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:0507362
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 54 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:157756
  • Position: Outer
  • Inner splines: 26
  • Splines wheel side: 40
Item no.:0522008
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 54,1 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:0528783
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 54 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:157582
  • Position: Outer
  • Inner splines: 26
  • Splines wheel side: 40
Item no.:0531363
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 54,1 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:0587999
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 54 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:154637
  • Position: Outer
  • Inner splines: 26
  • Splines wheel side: 40
Item no.:0592429
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 54,1 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:0596694
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 54 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:156353
  • Position: Outer
  • Inner splines: 26
  • Splines wheel side: 40
Item no.:0514056
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 54,1 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:0574827
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 54 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:155526
  • Position: Outer
  • Inner splines: 26
  • Splines wheel side: 40
Showing 49–72 of 94 products

Outer CV joints for Volvo V90

The Volvo V90 represents the pinnacle of Swedish engineering and comfort, but even such a robust car requires routine maintenance of its moving parts. The outer CV joint is one of the most heavily stressed components in the car's drivetrain, as it continuously operates under varying angles and loads. Here at CVJoint24, you will find an extensive range of 58 carefully selected products tailored specifically for the Volvo V90. As a Swedish driveline specialist, we understand the unique challenges posed by demanding European roads, where salt and harsh weather test every material to its limits.

Our goal is to provide parts that not only fit perfectly, but also preserve the driving feel and safety that your Volvo is renowned for. By choosing the right components from our comprehensive range, you can ensure that your car remains reliable kilometre after kilometre. We stock parts for everything from the earliest model years of the modern V90 series to the latest hybrid variants, making us a complete partner for your vehicle's drivetrain.

What does the outer CV joint do on a Volvo V90?

The outer CV joint on a Volvo V90 is a constant velocity joint designed to transfer power smoothly from the drive shaft to the wheel at a steady speed, regardless of the steering angle. This is particularly vital on front-wheel-drive and AWD models where the front wheels both steer and propel the vehicle. Inside the joint is a precision assembly of steel balls, a ball cage, and an inner race that articulates within an outer housing. This design allows seamless power delivery even at full steering lock, which is essential for low-speed manoeuvrability in urban traffic and tight parking spaces.

For a substantial, high-torque estate like the Volvo V90, it is crucial that these internal components are manufactured from premium-grade steel with exact tolerances. If the joint fails to work as intended, the vehicle loses its smoothness and the risk of consequential damage to the gearbox and suspension increases significantly. The CV joint serves as the final link in the chain converting engine torque into road motion, and its health is directly linked to your car's acceleration, refinement and stability.

Common signs of wear

Identifying wear on an outer constant velocity joint early can save you from costly repairs further down the line. The most prominent symptom on a Volvo V90 is a rhythmic clicking noise heard when turning, which typically speeds up with vehicle velocity. This is most often caused by a split rubber CV boot, allowing the vital lubricating grease to escape while dirt, moisture and road grit enter the joint. Once contaminants get inside, they act as an abrasive paste against the hardened internal raceways, causing play and intrusive noises.

You may also experience chassis vibrations during acceleration or an imbalance felt through the steering wheel when travelling in a straight line. We recommend inspecting the CV boots whenever you swap your tyres; an intact boot is the best defence against a failed CV joint. If you spot grease splattered on the inside of the wheel rim or around brake components, the boot has torn and the joint risks permanent damage if not attended to immediately.

How to choose the correct outer CV joint

Navigating spare parts can be complex, but for Volvo V90 owners we make the selection straightforward and reliable. Because the V90 comes in numerous technical configurations—from D3, D4 and T5 models to the high-performance T8 Twin Engine powertrains—drivetrain requirements vary. Differences in torque output and drive systems mean outer CV joints can have differing dimensions and spline counts, both at the wheel hub and the drive shaft connection. It is therefore vital not to rely solely on the model name, but to consider the exact technical specifications.

By selecting your vehicle's exact make, model and engine, you can quickly filter out unsuitable options to reveal the components engineered for your car. This ensures you receive a part matching the original factory specifications for both strength and geometry. Selecting a guaranteed fit is essential for smooth installation and lasting durability, especially on a modern car packed with advanced safety systems that rely on consistent power delivery at every wheel.

Related parts to inspect

Be sure to check these related pages for the same vehicle when working on the outer CV joint:

When one drivetrain component shows signs of wear, related parts on the same car often require attention as well. By comparing these pages for the Volvo V90, it becomes much easier to determine whether the issue lies purely within the outer CV joint or another adjacent section of the drivetrain.

This is especially true on models where vibrations, play and unusual noises can travel between several driveline components. A quick look at related categories minimises the risk of replacing one part whilst overlooking an adjacent component that causes the same underlying symptoms.

By taking a proactive approach and inspecting these neighbouring parts, you ensure that your vehicle's powertrain functions seamlessly without weak links. A healthy drivetrain also helps prevent premature tyre wear and keeps fuel consumption in check.

Why buy from CVJoint24?

Shopping with CVJoint24 means partnering with an international specialist dedicated to one of the most intricate areas of your car. We are a Swedish driveline specialist passionate about drivetrain excellence, focusing solely on outstanding quality and fitment precision. With vast stocks of parts specifically for the Volvo V90 in our Helsingborg warehouse, we ensure excellent availability and rapid dispatch across the EU. We understand how important your car is for everyday travel, which is why we only supply car parts we trust ourselves.

Our blend of technical know-how, carefully curated inventory, and precise vehicle filtering makes us the natural choice for Volvo drivers across Europe. We strive to make it effortless for both DIY mechanics and professional garages to source premium spare parts at fair prices, without compromise. When you shop with CVJoint24, you receive high-calibre components backed by genuine expertise, ensuring your Volvo V90 is ready for every journey ahead.

Frequently asked questions about outer CV joints for Volvo V90

How do I know if my Volvo V90 needs a new outer CV joint?

The most common sign is a clicking noise from the front end when turning, especially when accelerating at low speeds. Vibrations and grease splattered on the inside of the wheel are also clear warning signs.

Can I replace just the boot instead of the entire CV joint?

Yes, if you catch damage to the boot early before dirt and moisture have penetrated and damaged the joint itself, replacing just the CV boot and repacking it with fresh grease can be enough.

Does the same outer CV joint fit all Volvo V90 models?

No, it varies depending on the engine variant (such as D4, T8) and whether the car is front-wheel drive or AWD. Always select your car's exact make, model and engine to find the right version amongst our 58 products.

What happens if I keep driving with a worn or damaged CV joint?

In the worst case, the joint can fail completely, causing the car to lose all drive and leaving you stranded. It can also cause secondary damage to the suspension and brakes.

Are fitting accessories included when I buy a CV joint from you?

Yes, our CV joint kits are normally supplied complete with CV joint grease, circlips, CV boot and clamps to ensure a smooth, professional installation.

How many splines does a CV joint for a Volvo V90 have?

The spline count varies between different versions of the V90. This is one of the reasons why it is essential to check compatibility against your car's specific engine and chassis details.

Is it difficult to replace an outer CV joint on a V90 yourself?

It requires appropriate tools and mechanical experience, as the wheel hub and parts of the suspension must be dismantled. However, for a confident DIY mechanic, it is a perfectly manageable job.