Peugeot 206 SW

Spare parts and drivetrain components for the Peugeot 206 SW.

Products for Peugeot 206 SW

71 products
49 - 71 of 71
Item no.:140734
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 26
  • Seal diameter: 30,2 mm
  • Total length: 150 mm
Item no.:2180370
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 891 mm
  • ABS teeth: 48
Item no.:1186916
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 610 mm
  • Joint diameter: 75 mm
Item no.:2186303
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 885 mm
  • Joint diameter: 75 mm
Item no.:3552729
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 49 mm
  • Outer splines: 21
  • ABS teeth: 48
Item no.:110992
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 605 mm
  • Joint diameter: 79 mm
Item no.:352019
  • Position: Front, Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 54,8 mm
  • Thread size: M24X1,5
Item no.:3597518
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 60 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:1141539
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 597 mm
  • Joint diameter: 79 mm
Item no.:2126919
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 879 mm
  • Joint diameter: 79 mm
Item no.:1124961
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 21
  • Total length: 587 mm
  • Joint diameter: 90 mm
Item no.:2117584
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 21
  • Total length: 808 mm
  • Joint diameter: 90 mm
Item no.:2138348
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 21
  • Total length: 810 mm
  • ABS teeth: 48
Item no.:1183797
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 600 mm
  • Joint diameter: 90 mm
Item no.:1173961
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 899 mm
  • ABS teeth: 48
Item no.:2152465
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 21
  • Total length: 808 mm
  • Joint diameter: 90 mm
Item no.:2120469
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 21
  • Total length: 808 mm
  • ABS teeth: 48
Item no.:2126418
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 801 mm
  • ABS teeth: 48
Item no.:1152758
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 580 mm
  • Joint diameter: 88 mm
Item no.:2175426
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 801 mm
  • Joint diameter: 88 mm
Item no.:398615
  • Position: Front
Item no.:130901
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 99 mm
  • Width: 10 mm
Showing 49–71 of 71 products

Drivetrain for Peugeot 206 SW

The Peugeot 206 SW is a versatile estate that requires a well-maintained drivetrain to preserve its characteristic driving dynamics and stability. The drivetrain is the critical link transferring engine power to the wheels, which on a front-wheel-drive car like the Peugeot 206 SW places heavy demands on the front-end components. As drivetrain specialists, we provide a curated range of car parts selected to meet the exact technical requirements of this body style. Our comprehensive catalogue for the Peugeot 206 SW covers everything from small ABS rings to complete drive shafts.

Maintaining the drivetrain is vital for both safety and running costs. A worn component can quickly lead to consequential damage to the gearbox or suspension if left unresolved. Choosing the right spare parts from a dedicated specialist ensures your vehicle remains reliable for many kilometres to come. We focus on supplying parts that not only offer an accurate fit, but also match the performance standards Peugeot specified when manufacturing this model.

How the Peugeot 206 SW drivetrain works

The drivetrain on a Peugeot 206 SW features a transverse engine layout driving the front wheels. Power travels from the engine through the gearbox to the differential, which distributes torque across the two drive shafts. Because of this layout, the drive shafts differ in length: the shorter left shaft runs straight from the gearbox to the wheel hub, whereas the longer right shaft is often supported by an intermediate bearing to minimise vibration and torque steer under acceleration.

Each drive shaft is fitted with two joints: an inner CV joint at the gearbox end and an outer CV joint for Peugeot 206 SW at the wheel hub. The outer constant velocity joint allows the wheel to steer and move with the suspension while delivering smooth power transfer. Flexible rubber CV boots filled with specialist grease protect these precision assemblies from dirt and water. In addition, an ABS ring for Peugeot 206 SW is typically fitted onto the outer joint or shaft to supply vital wheel speed data to the braking system.

Common faults and symptoms

There are several telltale signs that your Peugeot 206 SW drivetrain is wearing out. One of the most frequent symptoms is a rhythmic clicking or knocking noise when cornering sharply at low speeds, such as during parking manoeuvres. This almost always points to a worn outer CV joint, often triggered by a split CV boot letting in road grit while the lubricating grease escapes. If you notice vibrations through the car under acceleration instead, an unbalanced driveshaft or a worn inner CV joint is frequently the cause.

Braking issues can also stem from the driveline. If the ABS warning light illuminates or the anti-lock system triggers unexpectedly under gentle braking, a cracked or corroded ABS ring is a common culprit. Exposed to the elements beneath the Peugeot 206 SW, rust builds up beneath the ring until it fractures, generating erratic sensor readings. Inspecting your CV boots and reluctor rings regularly can prevent costly damage by letting you replace an inexpensive component before total failure occurs.

Common replacement parts for Peugeot 206 SW

Our Peugeot 206 SW range includes the essential parts required for an effective, lasting repair. We supply complete drive shafts for both the left and right sides across various engine options. Replacing an entire drive shaft is often far more efficient than overhauling an old assembly with individual components, especially when the splines or shaft bar show signs of wear. If only the outer joint has failed, we stock outer CV joint kits complete with new CV boots, grease, and fitting hardware.

Alongside major mechanical assemblies, we supply exact-fit ABS rings tailored for the Peugeot 206 SW. These precision parts feature the correct tooth count to communicate properly with the vehicle's electronic control unit. When replacing a drive shaft or constant velocity joint, we also advise inspecting the wheel bearings and suspension ball joints, as these are typically disturbed during the work. Sourcing the right parts before you begin ensures a straightforward job, and our well-stocked inventory provides precisely what you need.

Find the right part for your Peugeot 206 SW

Browse the dedicated categories for your Peugeot 206 SW:

On a vehicle where drivetrain symptoms can overlap, starting in the correct category saves valuable workshop time. Selecting the specific section for your Peugeot 206 SW makes it easy to pinpoint whether you need a drive shaft, a CV joint, or a related driveline part matching your car's symptoms and fitment.

If you need to confirm technical details, compare your original part's dimensions or spline count with the specifications on our product pages. We provide clear, comprehensive technical data to help you order the correct component first time.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist shipping throughout the European Union from our central warehouse in Helsingborg, Sweden. Our strength lies in deep technical knowledge and a strict focus on providing the exact replacement part for your car. Ordering Peugeot 206 SW components from us gives you access to thoroughly verified, premium car parts designed to cope with everyday motoring demands. We select our manufacturers carefully to ensure long service life and reliable torque transmission.

By combining technical expertise with an intuitive catalogue where you can quickly select your make, model and engine, we help both DIY mechanics and professional garages find the correct components with confidence. Our aim is to be your dependable driveline source across Europe. With high part accuracy, OE-standard fitment, and a customer service team that understands automotive mechanics, you can trust CVJoint24 to keep your Peugeot 206 SW driving smoothly.

Frequently asked questions about drivetrain parts for Peugeot 206 SW

How do I know whether I need to replace the complete drive shaft or just the CV joint on my Peugeot 206 SW?

If vibrations occur under acceleration, it is often the inner joint or the shaft itself that has worn out, and replacing the complete drive shaft is recommended. If you only hear clicking noises when cornering, the fault is usually with the outer CV joint, which can be replaced separately provided the rest of the shaft is undamaged.

Does the same drive shaft fit both the right and left sides on a Peugeot 206 SW?

No, the drive shafts have different lengths on the right and left sides. The right-hand driveshaft is considerably longer and often fitted with a centre bearing in the middle, whereas the left-hand shaft is shorter and fits directly into the gearbox.

Why is the ABS warning light on in my Peugeot 206 SW even though the brakes work fine?

This is frequently caused by a cracked or corroded ABS ring. On the Peugeot 206 SW, it is common for rust to build up beneath the ring, causing it to crack; this disrupts the signal to the wheel speed sensor and triggers the warning light.

Is it difficult to replace an outer CV joint yourself on this model?

It requires certain tools, such as a large socket for the hub nut and suitable pullers, but it is an entirely manageable job for an experienced DIY mechanic. The most critical step is ensuring you thoroughly clean and properly grease the new joint.

How many splines does a CV joint have on a Peugeot 206 SW?

The spline count can vary depending on the engine variant and whether the vehicle has ABS. It is therefore essential to select your car's make, model and engine in our vehicle selector to ensure you get the exact matching specification for your car.

Do your CV joint kits contain everything needed for installation?

Yes, our outer CV joint kits for Peugeot 206 SW are normally supplied complete with the joint itself, a rubber CV boot, high-quality grease, circlips and new clamps.