Peugeot 3008 SUV

Spare parts and drivetrain components for Peugeot 3008 SUV.

Products for Peugeot 3008 SUV

42 products
25 - 42 of 42
Item no.:0687365
  • Total length: 116 mm
Item no.:241253
  • Position: Front right, Inner
  • Inner splines: 34
  • Splines gearbox side: 37
  • Seal diameter: 31,9 mm
  • Total length: 390 mm
Item no.:147206
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 37
  • Seal diameter: 40 mm
  • Total length: 155 mm
Item no.:2115588
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 953 mm
  • Joint diameter: 98 mm
Item no.:2189988
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 940 mm
  • Joint diameter: 86 mm
Item no.:353972
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 59 mm
  • Outer splines: 25
  • Thread size: M20X1,5
Item no.:3525327
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 58,6 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:1135089
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 625 mm
  • Joint diameter: 100 mm
Item no.:0533691
  • Position: Outer
  • Inner splines: 23
  • Splines wheel side: 28
  • Outer diameter: 77 mm
Item no.:219245
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 970 mm
  • Joint diameter: 91 mm
Item no.:114350
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 665 mm
  • Joint diameter: 91 mm
Item no.:2165456
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 935 mm
  • Joint diameter: 86 mm
Item no.:145447
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Seal diameter: 40 mm
  • Total length: 142,5 mm
Item no.:141395
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Seal diameter: 40 mm
  • Total length: 142,5 mm
Item no.:240318
  • Position: Front right, Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Seal diameter: 29,8 mm
  • Total length: 453 mm
Item no.:3573274
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 58,5 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:359480
  • Position: Outer
  • Inner splines: 34
  • Splines wheel side: 28
  • Seal diameter: 58,5 mm
  • Thread size: M22X1,5
Item no.:0606556
  • Total length: 113 mm
Showing 25–42 of 42 products

Drivetrain for Peugeot 3008 SUV

The Peugeot 3008 SUV is a modern crossover that demands a lot from its power transmission to maintain the comfort and driving enjoyment the model is renowned for. The drivetrain is the core of your vehicle's mobility, consisting of several interconnected components that transfer the engine's torque to the wheels. Maintaining these parts is vital for both safety and fuel economy, particularly as an SUV frequently endures varying loads in stop-and-go city traffic as well as on poorer road surfaces. With us, you will find a dedicated range tailored precisely to this model series, ensuring that every component satisfies the stringent technical standards of the vehicle manufacturer. By selecting the correct spare parts, you prolong your car's service life and guarantee a smooth, stable drive on any road.

How the drivetrain is engineered on the Peugeot 3008 SUV

The drivetrain layout on the Peugeot 3008 SUV is engineered to handle both efficient city journeys and long-distance motorway cruising with utmost precision. In most configurations, this front-wheel-drive SUV relies on two front drive shafts that link the gearbox directly to the front wheels. Each drive shaft is fitted with an inner and an outer CV joint to accommodate suspension travel and steering angles. The outer CV joint is particularly critical, as it allows the wheels to turn while delivering continuous power without loss. The entire assembly is shielded by flexible CV boots that retain essential grease while keeping out dirt, moisture, and road salt. This protection is especially crucial during tough European winters, where sudden temperature changes and grit can otherwise cause premature component wear.

Common faults and symptoms

There are several distinct signs that the drivetrain components in your Peugeot 3008 SUV are wearing out and require inspection. One of the most typical symptoms is a rhythmic clicking or knocking noise clearly audible when taking sharp corners at low speeds. This usually indicates wear inside an outer CV joint for Peugeot 3008 SUV, often caused by dirt entering through a split boot. Steering wheel vibrations or chassis shudder under acceleration can instead point to imbalance or internal play within a drive shaft for Peugeot 3008 SUV. If you spot grease splattered on the inside of the wheel rim or around the wheel arch, it is a clear warning of a damaged CV boot, demanding prompt replacement to protect the joint from total failure.

Common replacement parts for Peugeot 3008 SUV

Based on our vehicle data for the Peugeot 3008 SUV, two main product categories are most frequently required for drivetrain maintenance. We stock multiple variants of complete drive shafts as well as specific outer CV joints. Replacing a complete driveshaft is often the most cost-effective long-term repair, providing both inner and outer joints alongside factory-fitted CV boots in a ready-to-fit unit. This minimises the risk of recurring problems and significantly simplifies the job for DIY mechanics and professional garages alike. Here are the main categories available for your vehicle:

  • Drive shafts for Peugeot 3008 SUV
  • Outer CV joints for Peugeot 3008 SUV

By picking the appropriate category, you can swiftly find the parts engineered for your exact engine and gearbox setup, covering petrol, diesel, and hybrid models.

How to find the right part for your Peugeot 3008 SUV

Navigate directly to the relevant section for your Peugeot 3008 SUV:

When diagnosing drivetrain issues, it pays to start in the exact product category. By checking the specific parts for your Peugeot 3008 SUV, it becomes much easier to determine whether the issue lies with a drive shaft, a constant velocity joint, or a propeller shaft, guiding you straight to the right replacement for your symptoms and specifications.

Pinpointing the exact component required for a Peugeot 3008 SUV can be tricky, as technical specifications vary across model years, gearbox configurations, and engine types. The quickest and most dependable way to guarantee a proper fit is to filter by your car's make, model, and engine variant in our store. If you are carrying out the repair yourself, we also recommend checking the tooth count—the splines—on your existing part, as matching this specification is vital for a correct fit into both the wheel hub and the gearbox. Our database is designed to give you precise matches, eliminating guesswork and unnecessary returns.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, operating with deep technical expertise and a commitment to premium quality. When purchasing parts for your Peugeot 3008 SUV from us, you benefit from a wide, highly targeted inventory designed specifically for your model. Because we specialise exclusively in drivetrain components, we offer the depth of stock and technical know-how that general car parts retailers rarely match. With guaranteed fitment, rigorously tested components from trusted manufacturers, and prompt dispatch across the EU directly from our warehouse in Helsingborg, Sweden, you can trust your vehicle will be ready for many more kilometres of trouble-free driving. We are your reliable partner for keeping your drivetrain in top condition.

Frequently Asked Questions about Peugeot 3008 SUV - Drivetrain & Spare Parts

How do I know if my Peugeot 3008 SUV needs a new drive shaft?

The most common symptoms are vibrations during acceleration or a clicking noise when cornering. If the vibrations can be felt throughout the whole car, it is often the inner section of the drive shaft that is worn.

Can I replace just the outer CV joint on my Peugeot 3008 SUV?

Yes, we offer 3 specific outer CV joints for this model. If the shaft itself is undamaged and the issue lies solely with the joint, this is an excellent and cost-effective option.

Do all drive shafts fit all Peugeot 3008 SUV models?

No, drive shafts vary depending on engine size and whether the car has a manual or automatic gearbox. Always select your car's make, model and engine to find the correct part.

What causes a CV joint to fail?

The most common cause is a split CV boot. When the boot tears, the grease leaks out and dirt gets in, which quickly grinds down the hardened surfaces inside the joint.

How many drive shafts does a Peugeot 3008 SUV have?

Most models are front-wheel drive and have two front drive shafts, one on the right-hand side and one on the left-hand side. The right-hand shaft is usually longer and may feature a centre bearing.

Is it difficult to replace drivetrain parts on a Peugeot 3008 SUV myself?

It requires a range of tools and some mechanical experience, especially to release the ball joints and hub nut. However, for an experienced DIY mechanic, it is a thoroughly manageable job.