Peugeot 307 SW

Spare parts and drivetrain components for the Peugeot 307 SW.

Products for Peugeot 307 SW

38 products
25 - 38 of 38
Item no.:118430
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 625 mm
  • ABS teeth: 29
Item no.:351552
  • Position: Front, Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 54,8 mm
  • Thread size: M24X1,5
Item no.:3522647
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 58 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:2185605
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 921 mm
  • ABS teeth: 29
Item no.:3571308
  • Position: Front, Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Seal diameter: 58 mm
  • Outer diameter: 80 mm
Item no.:0604848
  • Position: Front
Item no.:358783
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 59 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:143595
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 26
  • Seal diameter: 30,2 mm
  • Total length: 150 mm
Item no.:3530274
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 60 mm
  • Outer splines: 25
  • Thread size: M20X1,5
Item no.:3553308
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 60 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:146216
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Seal diameter: 40 mm
  • Total length: 161,5 mm
Item no.:147419
  • Position: Front left, Inner
  • Inner splines: 39
  • Splines gearbox side: 37
  • Seal diameter: 42,2 mm
  • Total length: 155,5 mm
Item no.:0934212
  • Inner diameter: 35 mm
  • Outer diameter: 62 mm
Item no.:638662
  • Position: Rear
Showing 25–38 of 38 products

Drivetrain for Peugeot 307 SW

The Peugeot 307 SW is renowned for its generous space and practicality, making it a popular family car across Europe. Maintaining the comfort and safety that Peugeot is known for requires a drivetrain in top condition. The drivetrain is the system responsible for transferring power from the engine directly to the tarmac, and in a front-wheel-drive vehicle like the 307 SW, these components endure substantial stress during every start, braking manoeuvre, and corner. As your dedicated specialist in All car makes drivetrains, we supply a carefully chosen selection of spare parts tailored precisely to meet the technical specifications of the Peugeot 307 SW. Choosing the correct components not only ensures reliability, but also keeps fuel consumption and tyre wear at optimal levels. We focus on offering parts that meet or exceed original equipment standards, giving you total peace of mind on every journey.

How the Peugeot 307 SW drivetrain is constructed

The drivetrain layout of the Peugeot 307 SW is a sophisticated engineering design built to balance performance with smooth, vibration-free operation. The assembly primarily consists of a transverse engine mated to a gearbox, from which two drive shafts extend out to the front wheels. The offside (right-hand) drive shaft is typically longer and often fitted with a centre bearing to minimise vibrations, whereas the nearside (left-hand) shaft is shorter and engages directly into the gearbox. Each driveshaft features an inner CV joint that accommodates axial movement as the suspension works, along with an outer CV joint that allows for steering articulation. For the SW estate model, which frequently carries heavier loads than the standard hatchback variant, these joints are specially dimensioned to handle the increased load. Understanding how these parts interact is key to identifying potential issues before they cause an inconvenient breakdown.

Common faults and symptoms

Identifying drivetrain issues early can save you significant time and money. For Peugeot 307 SW owners, the classic symptom of a worn outer CV joint is a rhythmic clicking or knocking noise that is clearly audible when turning on full lock, such as when parking. If you notice vibrations through the chassis during acceleration—particularly between 50 and 90 km/h—this often indicates wear inside the inner constant velocity joints. Another frequent issue is an unbalanced drive shaft, which can manifest as a constant shudder through the steering wheel. It is also vital to inspect the CV boots regularly; a split or torn boot allows crucial grease to escape while letting in road grit, water, and salt, ruining the joint in very little time. If you notice the car pulling to one side or feeling unstable under throttle, a failing drive shaft may well be the cause.

Common replacement parts for the Peugeot 307 SW

When the time comes for repairs, certain components are more commonly required for the Peugeot 307 SW. We stock a comprehensive range for this model, comprising complete drive shafts and outer CV joints. Deciding between a complete shaft replacement or just the joint often comes down to labour costs and the overall condition of the original shaft. Here are the primary categories for your car:

  • Drive shaft for Peugeot 307 SW – A complete replacement including both inner and outer joints as well as fresh CV boots, making it the most cost-effective and durable solution in the long run.
  • Outer CV joint for Peugeot 307 SW – Ideal when the driveshaft is otherwise undamaged, but the joint has developed play or noise when cornering.

By replacing worn parts with our precision components, you restore your car's original handling characteristics and eliminate worries about sudden failure on the road. We make sure you receive the correct part tailored to your car's exact specifications.

How to find the right part for your Peugeot 307 SW

Proceed to the relevant section for your Peugeot 307 SW:

On a vehicle with several possible drivetrain configurations, it is best to navigate straight to the right category. By browsing the specific subcategories for the Peugeot 307 SW, you can easily distinguish between drive shaft, CV joint, or prop shaft issues and head directly to the parts that match your symptoms and vehicle fitment.

To pinpoint the exact part for your Peugeot 307 SW, it is crucial to consider the car's exact specification. Peugeot used several drive shaft variations depending on whether the engine is petrol or diesel, and whether it has a manual or automatic gearbox. Differences also exist in the spline count on the shaft, as well as whether your vehicle uses an ABS ring integrated onto the CV joint. The most reliable way to navigate our selection is to choose your exact make, model, and engine variant in our store selector. Our catalogue filters out incompatible parts to present technically verified options for your vehicle. This saves time and ensures you never end up with the wrong component when the car is already up on the ramp in the garage. Our database is continuously updated to deliver pinpoint accuracy.

Why shop with CVJoint24

CVJoint24 is not just another car parts retailer; we are the international shop of a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden. Our strength lies in our in-depth technical expertise and a carefully curated range that provides unmatched depth for the Peugeot 307 SW. We know that exact fitment is vital for a smooth repair, which is why we invest heavily in ensuring our technical data is precise. When you order from us, you can trust that you are receiving premium-quality components engineered for longevity. With our specialist focus on drivelines and a commitment to customer support, we aim to be your primary choice for replacement drivetrain parts. We combine specialist know-how with swift dispatch to ensure an effortless experience with every order.

Frequently Asked Questions about Peugeot 307 SW – Drivetrain & Spare Parts

How do I know if my Peugeot 307 SW needs a new drive shaft?

The most common signs are body vibrations during acceleration or a constant wobble in the steering wheel. If you also notice grease leaking from the CV boots, it is high time to inspect the shaft.

Do all CV joints fit every 307 SW model?

No, there are variations depending on engine size, gearbox and model year. Always select your car's exact make, model and engine in our vehicle selector to find the correct part for your car.

What is the difference between an inner and an outer CV joint?

The outer CV joint is located by the wheel and allows for steering, whilst the inner joint sits by the gearbox and accommodates length changes in the shaft as the suspension moves.

Can I replace just the CV boot if it is split?

Yes, if you catch the damage early and the joint has not started making noises or become contaminated with dirt inside, it is often enough to replace the CV boot and repack it with fresh grease.

Why does my Peugeot 307 SW vibrate during acceleration?

This is often caused by wear in the inner CV joints or an imbalance in the drive shaft. It is a classic symptom that power transfer is no longer properly centred.

How many drive shafts do you have in stock for the 307 SW?

We currently offer 11 different drive shafts matched for the Peugeot 307 SW to cover most engine and gearbox combinations.