Peugeot 508 II

Spare parts and drivetrain components for Peugeot 508 II.

Products for Peugeot 508 II

16 products
1 - 16 of 16
Item no.:2155240
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 965 mm
  • Diameter 1: 95 mm
Item no.:112300
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 627 mm
  • Diameter 1: 95 mm
  • Diameter 2: 89 mm
Item no.:240252
  • Position: Front right, Inner
  • Inner splines: 34
  • Splines gearbox side: 37
  • Seal diameter: 30 mm
  • Total length: 378 mm
Item no.:144636
  • Position: Front, Inner
  • Inner splines: 34
  • Splines gearbox side: 37
  • Seal diameter: 42 mm
  • Total length: 153 mm
Item no.:355636
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 59 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Item no.:216172
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 962 mm
  • Diameter 1: 88 mm
Item no.:117191
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 664 mm
  • Diameter 1: 88 mm
Item no.:144462
  • Position: Front left, Inner
  • Inner splines: 39
  • Splines gearbox side: 37
  • Seal diameter: 42,2 mm
  • Total length: 155,5 mm
Item no.:350557
  • Position: Front, Outer
  • Inner splines: 39
  • Splines wheel side: 28
  • Seal diameter: 58,5 mm
  • Outer splines: 28
Item no.:119678
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 662 mm
  • Joint diameter: 77 mm
Item no.:214520
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 935 mm
  • Joint diameter: 77 mm
Item no.:113602
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 639 mm
  • Diameter 1: 86 mm
Item no.:213530
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 965 mm
  • Diameter 1: 86 mm
Item no.:240900
  • Position: Front right, Inner
  • Inner splines: 34
  • Splines gearbox side: 37
  • Seal diameter: 31,9 mm
  • Total length: 390 mm
Item no.:147542
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 37
  • Seal diameter: 40 mm
  • Total length: 155 mm
Item no.:352506
  • Position: Outer
  • Inner splines: 34
  • Splines wheel side: 28
  • Seal diameter: 58,5 mm
  • Thread size: M22X1,5

Drivetrain for Peugeot 508 II

The Peugeot 508 II represents a sophisticated step forward in French automotive design, with a strong focus on aesthetics and a dynamic driving experience. To maintain this premium car's hallmark roadholding and refined, quiet ride, its drivetrain must be kept in top condition. As a dedicated specialist in drivetrains, we at CVJoint24 understand the technical challenges owners of this model can face. Power transmission in a modern car such as the 508 II is a finely tuned system where every single component, from the smallest circlip to the complete drive shaft, plays a decisive role. By investing in high-quality spare parts, you protect not only your vehicle's reliability but also its resale value. We aim to supply a comprehensive range for your model, helping you enjoy the comfort and precision for which Peugeot is renowned. Our specialist expertise ensures you can navigate the technical specifications and variants available across this model generation with complete confidence.

How the drivetrain is built on Peugeot 508 II

The drivetrain design of the Peugeot 508 II is a product of advanced engineering that combines low weight with high strength. Built on a modern platform, the vehicle relies on components engineered to very tight tolerances for optimal performance. Engine power is transmitted through the gearbox to the front wheels via two drive shafts of differing lengths, tailored to the specific configuration and engine variant. These shafts are fitted with high-performance CV joints designed to handle vertical suspension travel as well as horizontal steering angles while driving. Inside these joints, precision-machined balls and raceways are lubricated by a dedicated grease and protected by durable CV boots. On higher-output engine options and plug-in hybrid variants, these parts face substantial loads under hard acceleration. Understanding these demands is key to choosing the right car parts, and our products match the standards of Peugeot original equipment to guarantee smooth, vibration-free power delivery in all driving conditions.

Common faults and symptoms

Spotting drivetrain issues early can save significant time and garage repair costs later on. One of the classic signs of wear on a Peugeot 508 II is a rhythmic clicking noise at low speeds while turning on full lock. This sound almost invariably points to a worn outer CV joint that requires prompt replacement. Another frequent symptom is vibration felt through the chassis or steering wheel, especially under load when accelerating between 70 and 100 km/h. This typically indicates play or wear in the inner constant velocity joint, where the rollers can develop grooves in the housing over time. You should also watch for grease splashes or oil stains on the inner wheel rim or wheel arch lining, which directly indicates a split CV boot. Once a boot fails, internal parts are exposed to road grime, salt and water, accelerating wear rapidly. Tackling these warning signs quickly often allows you to replace an individual component before an entire driveshaft assembly suffers damage.

Common parts to replace on Peugeot 508 II

When it comes to regular replacements on the Peugeot 508 II, the drive shaft plays a pivotal role in keeping the vehicle roadworthy. Given the vehicle's architecture and the high torque outputs of modern engines, these components naturally experience wear over time. We have carefully curated reliable components to keep your car driving like new. To make finding your parts straightforward, we have grouped our range clearly by category. Here is the primary section for your car:

  • Drive shaft for Peugeot 508 II

Alongside complete shafts, related hardware and specialised grease often need checking during maintenance. Fitting a complete drive shaft is frequently the recommended solution for extensive wear, as it ensures all components—including both CV joints and boots—are brand new and factory-balanced. This removes the risk of an old inner joint developing issues shortly after replacing only the outer unit, providing a lasting, dependable repair and reducing unnecessary visits to the garage.

How to find the right part for Peugeot 508 II

Browse directly to the relevant category for the Peugeot 508 II:

When diagnosing drivetrain problems, starting in the right section saves valuable time. By browsing the dedicated categories for the Peugeot 508 II, you can easily distinguish between issues with drive shafts, CV joints or propeller shafts, and head straight to the parts that match your vehicle's symptoms and fitment.

The easiest way to locate the correct part for your Peugeot 508 II is to filter by vehicle make, model and engine variant in our search tool. Because Peugeot offers diverse powertrains, from economical BlueHDi diesels to PureTech petrol engines and plug-in hybrids, drivetrain specifications vary noticeably across versions. Selecting your exact engine and model reveals parts tailored specifically to your vehicle's technical profile. We always advise checking key specifications, such as the spline tooth counts on both ends of the shaft, as variations can occur depending on the production date and gearbox type. Our catalogue for Peugeot is among the most thorough available, verified against original equipment (OE) numbers. If you need assistance, our customer support team is on hand to help you interpret technical diagrams, ensuring you get the correct part first time and avoid unnecessary returns.

Why shop at cvjoint24.com

Choosing cvjoint24.com gives you the backing of a Swedish driveline specialist dedicated to quality, precision and peace of mind. We are not a general auto factor; our dedicated focus on drivetrains means we offer technical depth and specialised stock that broad retailers struggle to match. With our accurate catalogue fitment data, we help eliminate the uncertainty of buying car parts online. We understand that your time is valuable and that off-the-road vehicles cause genuine inconvenience, which is why our central warehouse in Helsingborg, Sweden, handles rapid dispatch across the European Union. Getting the right part every time underpins everything we do, from sourcing to customer support. When you order from us, you receive high-calibre components engineered for durability, supported by personal service from driveline specialists—whether you are a DIY mechanic or managing a busy workshop.

Frequently asked questions about Drivetrain parts for Peugeot 508 II

How do I know if the drive shaft on my Peugeot 508 II is faulty?

Common signs include clicking noises when taking sharp turns, vibrations through the chassis during acceleration, or visible grease leaks from a damaged CV boot inside the wheel arch.

How do I find the correct part for my car?

Simply select your Peugeot 508 II by its make, model and engine variant. This is the most reliable way to filter for components technically verified for your specific car.

What does your fitment guarantee mean for Peugeot parts?

It means we guarantee that the parts selected for your vehicle's exact make, model and engine will fit your car mechanically, giving you complete peace of mind with your purchase.

Do you sell complete drive shafts for Peugeot 508 II?

Yes, we offer complete drive shafts that include both the inner and outer CV joints as well as pre-assembled CV boots to make installation as straightforward as possible.

How quickly can I get my spare parts delivered?

We dispatch all in-stock items promptly from our central warehouse, ensuring fast and dependable delivery directly to your door across the EU.

Is it difficult to replace a drive shaft on a 508 II yourself?

It requires a degree of mechanical experience and the right tools, but for a confident DIY mechanic, it is a thoroughly manageable job.