Peugeot 508 SW

Spare parts and drivetrain components for Peugeot 508 SW.

Products for Peugeot 508 SW

40 products
1 - 24 of 40
Item no.:2198826
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 998 mm
  • Joint diameter: 95 mm
Item no.:0590926
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 58 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:0668821
  • Total length: 113 mm
Item no.:0573093
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 58 mm
  • Outer splines: 28
  • ABS teeth: 48
Item no.:2110297
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 958 mm
  • Joint diameter: 92 mm
Item no.:1163247
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 670 mm
  • Joint diameter: 86 mm
Item no.:2182220
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 950 mm
  • Joint diameter: 90 mm
Item no.:0573527
  • Position: Outer
  • Inner splines: 36
  • Seal diameter: 59,9 mm
  • Outer splines: 28
  • Joint diameter: 90 mm
Item no.:1103519
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 639 mm
  • Diameter 1: 86 mm
Item no.:2150719
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 983 mm
  • Joint diameter: 100 mm
Item no.:112502
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Inner splines: 24
  • Total length: 670 mm
  • Diameter 1: 100 mm
Item no.:0500490
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 59 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Item no.:2179388
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 935 mm
  • Joint diameter: 77 mm
Item no.:2172138
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 987 mm
  • Diameter 1: 100 mm
Item no.:118345
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Inner splines: 36
  • Total length: 696 mm
Item no.:218428
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Inner splines: 36
  • Total length: 1,015 mm
Item no.:253019
  • Position: Outer
  • Inner splines: 36
  • Splines wheel side: 28
  • Total length: 154 mm
  • ABS teeth: 36
Item no.:518894
  • Position: Rear right
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 698 mm
  • Diameter 1: 75 mm
Item no.:411060
  • Position: Rear left
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 913 mm
  • Diameter 1: 75 mm
Item no.:357123
  • Position: Outer
  • Inner splines: 34
  • Splines wheel side: 28
  • Seal diameter: 58,5 mm
  • Thread size: M22X1,5
Item no.:1155087
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 655 mm
  • Joint diameter: 95 mm
Item no.:2121766
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 945 mm
  • Joint diameter: 86 mm
Item no.:1116958
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 683 mm
  • Joint diameter: 86 mm
Item no.:213851
  • Position: Front
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 980 mm
  • Joint diameter: 92 mm
Showing 1–24 of 40 products

Drivetrain for Peugeot 508 SW

The Peugeot 508 SW is a model that combines elegant styling with everyday practicality, making it a popular choice for both families and long-distance commuters. To maintain the smooth, quiet ride that characterises the car, a fully functioning drivetrain is essential. The drivetrain is responsible for transferring engine power to the road wheels, and in a front-wheel-drive car like the 508 SW, this involves an intricate assembly of components that must work in complete harmony. At CVJoint24, we are specialists in these precise parts and understand the technical demands placed on a modern Peugeot drivetrain.

Our range for the Peugeot 508 SW has been carefully selected to cover the most common repair and maintenance needs. With comprehensive stock ready to dispatch, we offer solutions tailored to various engine configurations and gearboxes. By focusing on quality and precision engineering, we ensure that the parts you order not only fit perfectly, but also endure the demanding stresses of daily driving. As a Swedish specialist shipping across the EU, we take pride in offering both technical expertise and prompt deliveries to keep your car on the road.

How the Peugeot 508 SW drivetrain is constructed

The drivetrain on a Peugeot 508 SW is engineered to manage both engine torque and the operating angles caused by steering and suspension movement. The setup features a transverse engine driving the front wheels through a gearbox. Power is delivered from the gearbox to the wheels via two drive shafts of differing lengths. The offside drive shaft is typically longer and often incorporates a centre bearing to eliminate vibration and imbalance. Each drive shaft relies on two joints: an inner constant velocity joint that allows axial plunge as the suspension moves up and down, and an outer CV joint that accommodates steering angles.

These components are protected by CV boots that retain lubricating grease while sealing out road dirt and moisture. On the Peugeot 508 SW, tight manufacturing tolerances are vital, as even slight play can lead to irritating vibrations through the steering wheel or chassis. Because this estate model is frequently used for carrying heavy loads or travelling long distances, the metallurgy of the CV joints and the heat treatment of the shafts are critical to resisting fatigue over time. Understanding this layout is the first step in diagnosing any issues with your car's power transfer.

Common faults and symptoms

There are several telltale signs that the drivetrain on your Peugeot 508 SW is beginning to wear out. One of the most classic symptoms is a clicking or knocking sound on full steering lock at low speeds, such as when parking. This almost always points to a worn outer CV joint. If you instead experience shaking or shuddering through the car under acceleration, it generally indicates a worn inner CV joint or a bent drive shaft. These vibrations typically subside as soon as you ease off the throttle.

Another frequent issue is split or torn drive shaft boots. If a CV boot tears, centrifugal force quickly flings out the grease, allowing grit and moisture to enter and ruin the joint in short order. It is therefore crucial to inspect the boots regularly for cracks or oil misting. If you notice the car pulling to one side or developing persistent humming noises at motorway speeds, inspect the drivetrain components immediately. Ignoring these symptoms can lead to severe secondary damage to the gearbox and suspension, resulting in significantly more expensive repairs.

Common parts to replace on Peugeot 508 SW

When maintaining the drivetrain of a Peugeot 508 SW, certain components naturally face higher wear than others. Based on our workshop experience and sales data, drive shafts and outer CV joints are the parts most frequently in demand. We have arranged our catalogue to help you find the right category for your repair quickly:

  • Drive shaft Peugeot 508 SW – We supply a wide selection of complete drive shafts covering the vast majority of engine and gearbox configurations for this model.
  • Outer CV joint Peugeot 508 SW – When only the wheel-end joint has worn, we offer precision-machined joints that restore smooth, reliable steering operation.

Replacing a complete drive shaft is often the most time-efficient solution, as you receive a pre-assembled unit with both inner and outer joints and brand-new boots. This avoids the risk of an old inner joint developing play shortly after fitting a new outer joint. For a more targeted and economical repair, an outer CV joint kit is an ideal choice if the shaft itself and the inner joint are still in good condition. Always remember to check your vehicle's exact requirements regarding ABS rings and spline counts, as these can vary depending on engine size and production year.

How to find the right part for your Peugeot 508 SW

Navigate directly to the appropriate section for your Peugeot 508 SW:

When dealing with a vehicle that has several potential driveline issues, selecting the correct category from the start makes all the difference. Comparing the dedicated sections for the Peugeot 508 SW makes it straightforward to distinguish between faults in the drive shaft, CV joint or propeller shaft, taking you directly to the parts that match your symptoms and vehicle fitment.

Choosing the correct spare parts for a Peugeot 508 SW can sometimes seem daunting due to subtle technical variations between model years and equipment levels. The most reliable way to find the correct fitment in our shop is to select your Peugeot's exact make, model and engine variant from our vehicle menu. This filters our catalogue down to the parts tailored to your specific vehicle. Precise matching is particularly critical for drive shafts, where overall length and spline counts must correspond exactly to guarantee a trouble-free installation.

If you are ever uncertain about which component is required, we advise comparing the technical specifications listed on our product pages with the part fitted to your car. Take note of the external and internal spline counts and verify whether an integrated ABS reluctor ring is needed. Our database is continuously updated to deliver maximum accuracy, but our technical team is always on hand to assist if you need guidance. Ordering the right part first time saves time and money, ensuring a smooth and hassle-free repair.

Why shop at CVJoint24?

CVJoint24 is not merely a general car parts retailer; we are a Swedish driveline specialist dedicated to constant velocity joints, drive shafts and related transmission components. Thanks to this deep focus, we understand the distinct mechanical characteristics of the Peugeot 508 SW and provide components engineered to perform under demanding conditions. Quality is our highest priority at every stage, from selecting established OE-standard manufacturers to robust packaging and swift dispatch from our central Swedish warehouse.

When you order from us, you benefit from specialist product knowledge and comprehensive stock availability across key categories. We know that exact fitment is non-negotiable when replacing driveshafts and joints, which is why we continually refine our application data. By combining specialist expertise with an intuitive online shop and secure EU payment methods, we provide the best possible buying experience for mechanics and car owners alike. Rely on a specialist for your Peugeot 508 SW – we make sure your engine's power is delivered safely and smoothly to the road.

Frequently Asked Questions about Drivetrain for Peugeot 508 SW

How do I know if I need to replace the entire drive shaft or just the CV joint on my 508 SW?

If you only hear clicking noises when cornering, it is usually the outer CV joint that is worn. However, if you experience vibrations under acceleration, the issue is often the inner joint or the shaft itself, making a complete drive shaft replacement the most effective solution.

Do all drive shafts fit all Peugeot 508 SW models?

No, there are differences depending on the engine (such as BlueHDi or PureTech) and gearbox (manual or automatic). Always select your specific make, model and engine variant in our shop to find the exact replacement part for your car.

What happens if I drive with a split CV boot?

A split boot allows the lubricating grease to escape and dirt to enter. This causes the CV joint to wear out very rapidly, which can lead to complete failure where the car can no longer drive forward.

Do your CV joint kits include everything needed for the replacement?

Yes, our outer CV joint kits are normally supplied complete with boot, grease, clips and fitting accessories to ensure a straightforward installation.

Why is my Peugeot 508 SW vibrating at higher speeds?

Vibrations can have several causes, but within the drivetrain, a worn centre bearing on the long drive shaft or an unbalanced drive shaft are common culprits. Also check that the inner CV joints do not have excessive play.

Is it difficult to replace the drive shaft yourself on a 508 SW?

It requires appropriate tools and mechanical experience, as you need to detach suspension components and sometimes drain gearbox oil. We recommend following a workshop manual or consulting a professional garage if you are unsure.