Peugeot 508 SW II

Drivetrain components and spare parts for the Peugeot 508 SW II.

Products for Peugeot 508 SW II

13 products
1 - 13 of 13
Item no.:2109622
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 965 mm
  • Diameter 1: 95 mm
Item no.:111378
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 627 mm
  • Diameter 1: 95 mm
  • Diameter 2: 89 mm
Item no.:241716
  • Position: Front right, Inner
  • Inner splines: 34
  • Splines gearbox side: 37
  • Seal diameter: 30 mm
  • Total length: 378 mm
Item no.:144807
  • Position: Front, Inner
  • Inner splines: 34
  • Splines gearbox side: 37
  • Seal diameter: 42 mm
  • Total length: 153 mm
Item no.:358890
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 59 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Item no.:140450
  • Position: Front left, Inner
  • Inner splines: 39
  • Splines gearbox side: 37
  • Seal diameter: 42,2 mm
  • Total length: 155,5 mm
Item no.:358429
  • Position: Front, Outer
  • Inner splines: 39
  • Splines wheel side: 28
  • Seal diameter: 58,5 mm
  • Outer splines: 28
Item no.:116360
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 662 mm
  • Joint diameter: 77 mm
Item no.:219378
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 935 mm
  • Joint diameter: 77 mm
Item no.:110832
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 639 mm
  • Diameter 1: 86 mm
Item no.:215843
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 965 mm
  • Diameter 1: 86 mm
Item no.:248778
  • Position: Front right, Inner
  • Inner splines: 34
  • Splines gearbox side: 37
  • Seal diameter: 31,9 mm
  • Total length: 390 mm
Item no.:142068
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 37
  • Seal diameter: 40 mm
  • Total length: 155 mm

Drivetrain for Peugeot 508 SW II

The Peugeot 508 SW II represents a modern era of French engineering where styling meets cutting-edge technology. To preserve the exceptional comfort and sharp handling this model is renowned for, you need a drivetrain in prime condition. The transmission of power is at the very core of your car's movement, and every component must work together seamlessly to transfer engine output to the road surface without loss or vibration. As drivetrain specialists, we understand the exacting demands placed on a contemporary estate like the 508 SW II, where both dynamic performance and fuel efficiency are essential.

Maintaining your drivetrain is not merely about preventing breakdowns; it also protects your car's resale value and guarantees a safe driving experience for the whole family. By selecting the correct spare parts from a dedicated specialist, you ensure that your vehicle continues to deliver the agile dynamics Peugeot promised from the factory. We supply parts that meet or exceed original equipment specifications, which is vital for an estate boasting such sophisticated chassis engineering.

How the drivetrain is engineered on the Peugeot 508 SW II

The drivetrain of a Peugeot 508 SW II is a complex assembly engineered to cope with high torque while meeting modern demands for light weight. As a front-wheel-drive vehicle in most configurations, the system uses a transverse engine that delivers power through the gearbox to the front wheels. Drive shafts sit at the centre of this assembly, tasked not only with transmitting rotation but also accommodating significant articulation angles during steering and suspension movement. This places immense demands on both the inner and outer CV joints, as well as their protective CV boots.

Every component on your Peugeot is finely tuned to minimise friction and cabin noise. The drive shafts are frequently engineered with asymmetrical lengths and varying stiffness to counteract torque steer, a crucial feature on higher-output engine options. Understanding this setup underlines why precision is vital when selecting car parts. An incorrect dimension or an unbalanced driveshaft can quickly trigger knock-on damage in both the gearbox and suspension, making a specialist supplier a worthwhile investment.

Common faults and symptoms

When the drivetrain on a Peugeot 508 SW II starts to wear, the earliest warning signs are often subtle. One of the most typical symptoms is a clicking or knocking sound on full steering lock, such as when manoeuvring into a parking space or tackling tight turns. This generally points to a worn outer CV joint, frequently caused by a split CV boot that has let grease escape and road grime enter. Ignoring these noises can lead to complete failure, leaving the vehicle stranded with no drive.

Another frequent issue is shuddering or vibration under acceleration, particularly at motorway speeds. This often stems from worn inner constant velocity joints or an unbalanced drive shaft. In a refined estate designed to cruise quietly on the motorway, such vibrations quickly become noticeable and intrusive. It is equally important to inspect the inner wheel rims and your driveway for grease or oil spots; these are early warnings that a protective boot has split, exposing precision internals to the elements.

Common parts to replace on the Peugeot 508 SW II

For owners of this model, front axle driveline parts will inevitably require attention after covering many kilometres. The core part in our catalogue for this vehicle is a complete drive shaft for Peugeot 508 SW II. Installing a complete assembly is often far more cost-effective and dependable than rebuilding individual joints, giving you a factory-balanced unit complete with new CV joints and fitted boots.

Here are the primary component categories for your vehicle:

  • Drive shafts: Complete assemblies for both the near-side and off-side, ensuring smooth, vibration-free driving.
  • CV joint kits: Ideal when only the joint requires replacement and the shaft itself is undamaged.
  • CV boot kits: Preventive maintenance kits that protect expensive components against premature wear.

Focusing on these key components allows you to preserve the original driving dynamics of your car. We keep our warehouse stocked with the fastest-moving parts so your downtime is kept to an absolute minimum when work is due.

How to find the right part for the Peugeot 508 SW II

Navigate directly to the appropriate category for your Peugeot 508 SW II:

With several interconnected driveline parts, it pays to begin in the right product category straight away. Reviewing the dedicated subcategories for the Peugeot 508 SW II makes it straightforward to distinguish between drive shaft, CV joint, or prop shaft issues, taking you directly to the components matched to your symptoms and vehicle specification.

If you need assistance, our technical experts are always on hand to advise you, ensuring you order the correct component for your Peugeot every time.

Why shop with CVJoint24

CVJoint24 is far from a standard motor factor; we are the international shop of a Swedish driveline specialist, operating from our central warehouse in Helsingborg, Sweden, and dedicated to drivetrain and power transmission components. Our service offers the depth of technical knowledge that general retailers rarely match. When you order from us, you benefit from a combination of high-specification parts and specialist advice, ensuring your Peugeot 508 SW II receives components engineered to last. We know you need to get back on the road without delay, so we dispatch in-stock items swiftly across the European Union.

Our fitment guarantee takes the risk out of ordering parts online. Simply select your car's make, model, and engine variant, and in the unlikely event that a part does not fit as intended, we resolve it promptly and without hassle. We aim to be the first choice for both DIY mechanics and professional garages looking for exact-fit parts and dependable longevity. Choosing us means total peace of mind, rapid fulfilment, and advice from driveline specialists who know your vehicle inside out.

Frequently Asked Questions about Drivetrain for Peugeot 508 SW II

How do I know if my Peugeot 508 SW II needs a new drive shaft?

The most common signs are clicking noises when turning, vibrations under acceleration or visible grease leaking from the CV boots. If you notice an imbalance throughout the car at motorway speeds, this can also indicate a worn or damaged drive shaft.

Do all drive shafts fit every 508 SW II model?

No, specifications differ depending on the engine type (such as diesel, petrol or hybrid) and the gearbox. Always select your car's exact make, model and engine in our vehicle selector to find the parts engineered specifically for your vehicle.

What does your fitment guarantee mean?

Our fitment guarantee means that when you select your specific car model and engine variant, we guarantee the part will fit your vehicle. In the unlikely event that a part does not fit, we will quickly assist you in getting the right component at no extra cost.

Do you offer fast delivery for Peugeot parts?

Yes, we ship rapidly across Europe from our central Swedish warehouse for most in-stock products. We understand you need your Peugeot 508 SW II back on the road as quickly as possible.

Are your drive shafts of the same quality as original parts?

Our components are manufactured to meet or exceed original equipment technical specifications for the Peugeot 508 SW II, ensuring top quality, precise fitment and long service life.

Do I need to replace both drive shafts at the same time?

It is not mandatory, but if one side has worn out from high mileage, the other side is often nearing the end of its service life as well. Many motorists choose to replace both driveshafts together to maintain reliability and peace of mind.