Peugeot 807

Spare parts and drivetrain components for Peugeot 807.

Products for Peugeot 807

39 products
1 - 24 of 39
Item no.:1158129
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 641 mm
  • Joint diameter: 100 mm
Item no.:215577
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 970 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 89 mm
Item no.:2120997
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 980 mm
  • Joint diameter: 100 mm
Item no.:2153452
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • Total length: 865 mm
  • Joint diameter: 86 mm
Item no.:0512410
  • Position: Outer
  • Inner splines: 29
  • Seal diameter: 58 mm
  • Outer splines: 27
  • Thread size: M24X1,5
Item no.:1143838
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • Total length: 656 mm
  • Diameter 1: 86 mm
Item no.:7314261
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 59 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:1137915
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 610 mm
  • Joint diameter: 95 mm
Item no.:0598226
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 58 mm
  • Outer splines: 28
  • ABS teeth: 48
Item no.:1128750
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 631 mm
  • Joint diameter: 102 mm
Item no.:2134767
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 960 mm
  • Diameter 1: 95 mm
Item no.:1167244
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • Total length: 635 mm
  • Diameter 1: 86 mm
Item no.:1168310
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 637 mm
  • Joint diameter: 95 mm
Item no.:2171274
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 970 mm
  • Joint diameter: 95 mm
Item no.:0956159
  • Inner diameter: 35 mm
  • Outer diameter: 62 mm
Item no.:0929153
  • Inner diameter: 38 mm
  • Outer diameter: 63 mm
Item no.:0653224
  • Position: Front
Item no.:398520
  • Position: Front
Item no.:0955462
Item no.:3573378
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 59 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:699174
  • Position: Rear
  • Inner diameter: 30 mm
  • Outer diameter: 50 mm
  • Height: 12 mm
Item no.:355731
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 59 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:359368
  • Position: Front, Outer
  • Inner splines: 28
  • Splines wheel side: 27
  • Seal diameter: 58 mm
  • Thread size: M24X1,5
Item no.:395588
  • Position: Front
  • Seal ring diameter: 36,2 mm
Showing 1–24 of 39 products

Drivetrain for Peugeot 807

The Peugeot 807 is a spacious MPV that places high demands on its drivetrain to cope with both weight and passenger loads across varied driving conditions. The drivetrain is the central system of the vehicle that transfers power from the engine to the wheels, and for a model such as the 807 it is crucial that these components remain in top condition to ensure safety. At CVJoint24 we specialise in precisely these parts, offering Peugeot owners a reliable alternative to expensive genuine parts without compromising on quality. By focusing on the drivetrain as a whole, we provide deep technical expertise and a product range covering the most common requirements for this specific model, whether for daily commuting or long holiday trips fully laden.

How the Peugeot 807 drivetrain is constructed

The layout of the drivetrain on a Peugeot 807 follows a classic front-wheel-drive configuration optimised for comfort and interior space. Power is generated by the engine and routed through the gearbox, where it is distributed to the front wheels via two robust drive shafts. Each drive shaft is fitted with two joints: an inner CV joint mounted at the gearbox and an outer CV joint situated at the wheel. The outer joint is a constant velocity joint engineered to handle wide steering angles while transmitting power, whilst the inner joint accommodates the axial plunge created as the vehicle suspension works. This entire delicate assembly is shielded by rubber CV boots packed with specialised grease. Because the Peugeot 807 is frequently used as a heavily loaded family car, these moving components face significant mechanical stress and thermal loads over time, making regular maintenance and inspection essential.

Common faults and symptoms

There are several distinct signs indicating that the drivetrain on your Peugeot 807 is becoming worn and requires attention for safety reasons. One of the most typical symptoms is a rhythmic clicking or knocking sound that is clearly audible during sharp turns at low speed, such as when parking. This almost invariably points to a worn outer CV joint on your Peugeot 807, where the internal steel balls have begun wearing into their tracks. If you instead notice vibrations through the steering wheel or body shell under acceleration, it may signal that the inner joints have developed play or that the driveshaft itself has suffered an imbalance. It is also vital to inspect the condition of the boots regularly; a tiny split in the rubber quickly allows the crucial grease to escape while letting road dirt penetrate. Left unaddressed, the joint will seize, potentially causing a costly breakdown on the road.

Common parts to replace on the Peugeot 807

On the Peugeot 807 we see a clear pattern in the parts most frequently replaced to maintain original drivability and comfort. Our range includes dedicated items for this model, reflecting the different engine options and gearbox setups used throughout its production run. Here are the most sought-after categories for your car available in our store:

  • Drive shaft Peugeot 807 – several variations available to cover everything from diesel engines to petrol units.
  • Outer CV joint Peugeot 807 – 5 high-quality options for repairing worn joints.

Replacing an entire drive shaft is often a sensible and cost-effective approach compared to replacing individual joints, especially on an older vehicle. It saves valuable labour time during installation and provides a complete unit where both inner and outer joints as well as the boots are factory fresh, ensuring significantly greater longevity for the entire repair.

How to find the correct part for your Peugeot 807

Proceed to the relevant section for your Peugeot 807:

On a vehicle with multiple potential driveline issues, it is wise to start directly in the correct category. Comparing the exact part categories for the Peugeot 807 makes it easier to differentiate between issues in a drive shaft, CV joint or propeller shaft, taking you straight to the page matching your symptoms and fitment.

Identifying the exact component for your Peugeot 807 can sometimes present a technical challenge, as manufacturers frequently revised specifications based on engine size, torque output and chassis numbers. To make your purchase straightforward and accurate, select your car's make, model and engine to display the parts verified for your exact vehicle. We also advise double-checking technical specifications, such as the tooth count on the ABS ring or the spline count on the stub axle, when replacing an individual CV joint. Our comprehensive catalogue delivers the right answer immediately, minimising the risk of ordering incorrect items and keeping garage downtime to a minimum.

Why shop at CVJoint24

As a Swedish driveline specialist shipping across the EU from our warehouse in Helsingborg, CVJoint24 combines specialist technical knowledge with an extensive product range. We understand that your Peugeot 807 is an integral part of your day-to-day life and that you need components built to last. By focusing exclusively on drivetrain parts, we maintain strict precision and quality control that general motor factors simply cannot match. When purchasing from us, you receive accurately fitting parts manufactured to exacting standards that match or exceed OEM specifications. We pride ourselves on specialist expertise, providing the technical confidence you need when ordering complex spare parts. With quality parts from CVJoint24, you can rely on dependable power transmission for thousands of kilometres ahead.

Frequently Asked Questions about Drivetrain for Peugeot 807

What are the most common symptoms of a faulty drive shaft on a Peugeot 807?

The most common symptoms are vibrations during acceleration, clicking noises when cornering sharply, and in some cases a shaking steering wheel at higher speeds.

Can I replace just the outer CV joint on my Peugeot 807?

Yes, if the fault is isolated to the outer joint and the rest of the shaft is in good condition, you can replace only the joint. We stock 5 different outer CV joints for Peugeot 807.

How do I know which drive shaft fits my specific Peugeot 807?

The easiest way is to use our search filter to select your car's make, model and engine. This filters out the correct parts based on your car's specific engine and gearbox.

Why does my car vibrate under acceleration?

Vibrations during acceleration on a Peugeot 807 are often caused by wear in the inner CV joints or an imbalance in the drive shaft itself.

Is it necessary to replace both drive shafts at the same time?

No, it is not strictly necessary, but if one side is worn out, there is a strong chance that the other side is also nearing the end of its service life.

How often should I inspect the CV boots?

We recommend inspecting the boots during every routine service or seasonal tyre change. An intact CV boot is the cheapest insurance against costly CV joint replacements.