Porsche Macan

Spare parts and drivetrain components for the Porsche Macan.

Products for Porsche Macan

16 products
1 - 16 of 16
Item no.:3109716
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 497 mm
  • Splines wheel side: 42
Item no.:0468248
  • Position: Inner
  • Inner splines: 24
Item no.:0512026
  • Position: Outer
  • Seal diameter: 76,5 mm
  • Inner splines: 25
  • Outer splines: 42
Item no.:415628
  • Position: Rear left
  • Total length: 781 mm
  • Splines gearbox side: 32
Item no.:0273607
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 1,449 mm
Item no.:0690795
  • Position: Front
  • Diameter: 76 mm
  • Height: 120 mm
  • Outer diameter: 22 mm
Item no.:6250746
  • Position: Rear
  • Total length: 1,450 mm
Item no.:313945
  • Total length: 498 mm
  • Splines wheel side: 42
  • ABS teeth: 0
Item no.:3154558
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 495 mm
  • Splines wheel side: 42
Item no.:343217
  • Position: Front, Inner
  • Total length: 84 mm
  • Splines wheel side: 24
Item no.:417598
  • Position: Rear left
  • Total length: 781 mm
  • Splines gearbox side: 32
Item no.:629378
  • Position: Rear
Item no.:0664955
  • Position: Front
  • Diameter: 76 mm
  • Height: 120 mm
  • Outer diameter: 22 mm
Item no.:340782
  • Position: Front, Inner
  • Total length: 84 mm
  • Splines wheel side: 24
Item no.:620827
  • Total length: 1,450 mm
Item no.:623996
  • Position: Rear

Drivetrain for Porsche Macan

The Porsche Macan represents an ideal balance between sports-car dynamics and SUV versatility. Maintaining this balance requires a drivetrain in peak condition. The drivetrain in a Porsche Macan is subjected to heavy loads, particularly during spirited driving when torque must be distributed effectively between the wheels. As driveline specialists, we understand the importance of every component—from the smallest CV boot to the complete drive shaft—meeting the highest quality standards. Our focus is on offering parts that not only fit physically, but also perform reliably under the thermal and mechanical stresses encountered in a Porsche. Choosing the right spare parts ensures that your car's power delivery remains quiet, vibration-free, and efficient for many thousands of kilometres to come.

How the Porsche Macan drivetrain is engineered

The drivetrain on a Porsche Macan is an impressive piece of engineering, built around an advanced all-wheel-drive system on most variants. Engine power is directed via the gearbox to a transfer box, which distributes torque between the front and rear axles. This setup requires a robust propeller shaft for Porsche Macan to transmit power along the chassis. At the wheels, you will find drive shafts fitted with both inner and outer CV joints. The outer CV joint allows the front wheels to steer while delivering drive, whilst the inner constant velocity joint accommodates vertical suspension travel. The entire assembly is finely calibrated to deliver the sharp driving dynamics the brand is known for, making the choice of replacement components crucial to preserving your car's character.

Common faults and symptoms

Despite Porsche's excellent build quality, drivetrain components are subject to natural wear. One of the most typical signs of a worn outer CV joint on a Porsche Macan is a rhythmic clicking noise, clearly audible during sharp turns at low speeds. If you experience body vibrations under acceleration instead, this often points to play in an inner CV joint or an out-of-balance prop shaft. It is also vital to inspect the CV boots for grease leaks; if a boot splits, grease escapes and road dirt enters, rapidly destroying the joint. Ignoring these symptoms can lead to more extensive damage to the gearbox and differentials, making early diagnosis and repair the more economical route.

Common parts to replace on the Porsche Macan

When it is time to service or repair the drivetrain on your Macan, certain components are requested more frequently. We have tailored our inventory to cover the most critical requirements for this model. Here are the most relevant categories for your vehicle:

  • Porsche Macan drive shaft – complete shafts for both front and rear.
  • Porsche Macan outer CV joint – to resolve clicking noises while steering.
  • Porsche Macan inner CV joint – to eliminate vibrations under acceleration.
  • Porsche Macan propeller shaft – central shafts transmitting drive to the rear axle.

Replacing worn components with our quality-assured parts restores your car's original performance and minimises the risk of secondary damage throughout the driveline.

How to find the right part for your Porsche Macan

Proceed to the relevant section for your Porsche Macan:

On a vehicle with several possible driveline issues, starting in the right category saves time. By comparing the exact component sections for the Porsche Macan, it is straightforward to distinguish between faults in a driveshaft, CV joint, or prop shaft, and move directly to the page that best matches your symptoms and fitment.

Identifying the precise part for your Porsche Macan can be demanding, as specifications vary depending on engine variant and model year. To make the process straightforward and reliable, you can select your car's make, model, and engine on our website. This filters our catalogue so you only see parts that are technically compatible with your specific vehicle, removing any guesswork around spline counts, lengths, and flange dimensions. Should you require further guidance, our technical team is readily available to assist. We always advise checking both the left and right sides when a CV joint shows wear, as both components experience similar operating loads and often benefit from being replaced together.

Why buy from CVJoint24?

CVJoint24 is far more than a general car-parts retailer; we are the international shop of a Swedish driveline specialist, sending parts directly from our warehouse in Helsingborg, Sweden across the EU. Our singular focus on the drivetrain means we can offer product depth and technical support that general stores rarely match. We appreciate the technical demands of a Porsche Macan and select our suppliers rigorously to ensure every component delivers on durability and fitment. Combining specialist expertise, prompt dispatch, and clear vehicle filtering, CVJoint24 is the trusted choice for Porsche drivers who demand uncompromising quality in their driveline.

Frequently asked questions about drivetrain parts for Porsche Macan

How do I know if my Porsche Macan needs a new drive shaft?

The most common symptoms are vibrations under acceleration or unusual noises from the wheel arches. If you spot grease on the inside of the wheel rim, it is often a sign of a split CV boot, which quickly leads to drive shaft failure if left unaddressed.

Do all CV joints fit all Macan models?

No, there are variations depending on engine capacity and chassis configuration. Always select your specific Porsche Macan model, year and engine variant to ensure you receive the correct part.

What is the difference between an inner and an outer CV joint?

The outer CV joint sits closest to the wheel hub and accommodates steering angles, whilst the inner constant velocity joint sits closest to the gearbox and accommodates suspension movement. Symptoms of wear also differ between the two.

Is it difficult to replace the propeller shaft on a Porsche Macan?

It is a technically demanding job that requires appropriate tools and an understanding of the vehicle's all-wheel drive system. We recommend having sound mechanical experience or having the work carried out by a professional garage.

Why does my car vibrate at higher speeds?

Vibrations at motorway speeds can often stem from an imbalanced prop shaft or wear in its centre bearing. It is important to inspect the propeller shaft if the vibrations persist after balancing the wheels.

Are the boot and grease included when I buy a CV joint from you?

Yes, our CV joint kits are supplied complete with all necessary fitting accessories, including the CV boot, specialised grease and securing clips to ensure a proper installation.