Propeller shafts for Mercedes Sprinter 3 T

Need a new propeller shaft for your Mercedes Sprinter 3 T? As a dedicated drivetrain specialist, we offer an extensive range of high-quality propeller shafts engineered specifically for...

Products for Propeller shafts for Mercedes Sprinter 3 T

81 products
73 - 81 of 81
Item no.:620725
  • Position: Rear
  • Total length: 2,745 mm
Item no.:629617
  • Position: Rear
  • Outer diameter 1: 67 mm
  • Bolt circle diameter 1: 112 mm
  • Outer diameter 2: 67 mm
  • Bolt circle diameter 2: 112 mm
Item no.:629932
  • Total length: 2,211 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
  • Outer diameter 2: 57 mm
Item no.:624418
  • Position: Rear
  • Total length: 2,386 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:0240570
  • Total length: 2,627 mm
Item no.:623042
  • Position: Rear
  • Total length: 2,143 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
Item no.:623424
  • Position: Rear
  • Total length: 2,585 mm
Showing 73–81 of 81 products

Propeller shafts for Mercedes Sprinter 3 T

The Mercedes Sprinter 3 T is a legendary workhorse known for its reliability and versatility, but maintaining its performance demands top-quality drivetrain components. The propeller shaft is a central part of this system, and with us you will find a broad selection of specific parts tailored to this exact model series. Whether you drive a van, pickup or bus version, the propeller shaft is engineered to handle the substantial torque generated by the engine, especially under heavy load. We understand the importance of minimising downtime for commercial vehicles, which is why we stock prop shafts that meet or exceed original equipment specifications to guarantee a long service life.

By focusing on precise fitment and robust construction, we help you keep your Mercedes running in demanding conditions. Every shaft in our range is carefully selected to withstand European roads and winters as well as the strains of city driving and long-distance transport. Investing in a high-quality propeller shaft is not merely a repair, but insurance for your vehicle's future operating reliability. We ensure you receive a product that is balanced and ready to fit, saving time at the garage and delivering an immediate improvement to your driving experience.

What does a propeller shaft do on the Mercedes Sprinter 3 T?

The propeller shaft, often referred to simply as the prop shaft, has the critical task of transferring rotational power from the gearbox to the rear axle. On a Mercedes Sprinter 3 T, which in most configurations is rear-wheel drive, this is a long rotating shaft running underneath the vehicle chassis. Because the engine and gearbox are mounted rigidly in the frame while the rear axle moves up and down with the suspension, the prop shaft must be flexible. This is achieved using universal joints and telescopic splines that allow the shaft to alter both angle and length while driving without interrupting power transmission.

Beyond transferring power, the propeller shaft plays a vital role in the vehicle's NVH (Noise, Vibration, Harshness) characteristics. A perfectly balanced shaft minimises vibrations that would otherwise travel into the bodywork, causing driver fatigue and wear on other components. On longer wheelbase models, the propeller shaft is often split into two or three sections connected by centre bearings to prevent the shaft from bowing or resonating at high rotational speeds. This complex assembly demands precision at every joint so that the entire drivetrain works harmoniously and efficiently.

Common signs of wear

There are several clear warning signs indicating that the propeller shaft on your Mercedes Sprinter 3 T is worn or damaged. The single most common symptom is vibrations felt throughout the body or through the seat, often within specific speed ranges or under hard acceleration. These vibrations usually stem from an unbalanced shaft, which can happen if a balance weight has detached or if a universal joint has begun to seize due to dirt and corrosion. If vibrations increase with vehicle speed rather than engine revs, the prop shaft is the most likely culprit.

Another common sign is abnormal noise from underneath the vehicle. A metallic clunking sound when engaging a gear or switching between accelerating and engine braking typically points to play in the universal joints. If you instead hear a whining, grinding or humming noise that changes with road speed, it is often a sign that the centre bearing rubber mount has perished or that the bearing itself is worn out. Ignoring these symptoms is risky; a defective propeller shaft can ultimately cause consequential damage to the gearbox output shaft or the rear differential, resulting in far more extensive and costly repairs.

How to choose the correct propeller shaft

Choosing the correct propeller shaft for your Mercedes Sprinter 3 T requires care, as there is a wide variety of designs depending on the vehicle's exact configuration. The first detail you need is the wheelbase, as prop shaft length varies considerably between short, medium and long wheelbase variants. Gearbox type also matters; an automatic model often uses a different length for the front section compared to a manual. The propeller shaft is frequently split into multiple sections, so it is important to check whether you need the complete assembly or just a specific section.

The most reliable way to ensure correct fitment is to select your vehicle's make, model and engine variant in our store filter, which displays the options technically compatible with your specific van. We also recommend checking the original equipment (OE) number, which is usually stamped into the old shaft or printed on a label. If you are uncertain about dimensions or specifications, our knowledgeable customer support team is on hand to guide you. At CVJoint24, our goal is to help you get the right part first time, saving both time and frustration during installation.

Related parts to check

Be sure to inspect these related parts for the same vehicle when working on the propeller shaft:

When one drivetrain component shows wear, adjacent parts on the vehicle often require inspection too. By checking these exact pages for the Mercedes Sprinter 3 T, it becomes easier to determine whether an issue lies with the propeller shaft itself or another related part of the drivetrain.

This is particularly relevant on models where vibrations, play and strange noises can blur the lines between multiple drivetrain components. A quick check of related categories reduces the risk of replacing the right type of part while overlooking a neighbouring component that contributes to the very same problem.

By checking these parts at the same time, you can prevent future issues and ensure your entire drivetrain operates under optimal conditions. A complete inspection gives you a safer vehicle and better running economy over time.

Why buy from CVJoint24?

CVJoint24 is your dedicated partner for propeller shafts and other drivetrain parts. Backed by our Swedish driveline specialist roots, we have developed unique technical expertise and a product range few can match. We understand that our customers, especially those operating a Mercedes Sprinter 3 T, rely on their commercial vehicles daily. That is why we never compromise on quality. All our products are thoroughly selected to meet the highest standards for fit and durability, supported by our reliable fitment guarantee. When you shop with us, you can be confident of receiving the right car parts at the right price.

We dispatch quickly across Europe to get your van back on the road without delay. Our website makes it simple to locate the correct parts, and behind the scenes our technical specialists are always available to answer questions and advise on your purchase. Choosing CVJoint24 gives you confidence, specialist know-how and a straightforward buying experience. We are proud to be your trusted destination for vehicle drivetrain components, and we look forward to helping you keep your Mercedes in peak condition.

Frequently asked questions about propeller shafts for Mercedes Sprinter 3 T

How do I know which propeller shaft fits my Mercedes Sprinter 3 T?

The easiest and most reliable method is to select your vehicle's make, model and engine variant in our search filter. As prop shafts vary depending on wheelbase and gearbox type, this accurately filters out the exact parts designed for your specific model.

What are the most common signs that the propeller shaft needs replacing?

Typical symptoms include vibrations through the vehicle body while driving, clunking noises when shifting gears or accelerating, and whining noises originating from the centre bearing. If the vibrations intensify with speed, the propeller shaft is often the culprit.

Do I need to replace the entire propeller shaft if only the centre bearing is worn?

That depends on the shaft's construction. On certain Sprinter 3 T models, the centre bearing can be replaced separately, whereas on others it is an integrated unit. We supply both standalone centre bearings and complete propeller shafts.

Are your propeller shafts balanced upon delivery?

Yes, all complete propeller shafts in our range are pre-balanced at the factory prior to dispatch. This is essential to prevent driveline vibrations and to ensure smooth, quiet operation once installed.

What does your fitment guarantee cover?

Our fitment guarantee means that when you select your vehicle's make, model and engine and order the recommended part, we guarantee it will fit your vehicle. Should anything unexpectedly prove incorrect, we will help you find the right component.

How quickly can I get my new propeller shaft delivered?

We always aim for prompt dispatch and efficient handling. For most propeller shafts, we provide very swift international delivery across the EU directly from our central warehouse.